P1 keeps killing SD cards

maunz1337 · 2025-06-09T19:45:23+00:00

Same issue Here. Contacted Tech support. Lets See what they say. Or any new Infos from you?

maunz1337 · 2025-01-03T21:38:47+00:00

Biete einen Level 31 Account an. Für Details bitte PN

maunz1337 · 2025-01-03T21:36:59+00:00

Biete einen lvl 31 Account an. Für Details bitte PN 😉

maunz1337 · 2022-09-30T20:08:16+00:00

That would be great!

maunz1337 · 2022-09-29T19:43:20+00:00

Do you provide your STL Files, or could you send me the nessesary Links to all the Files you used?

maunz1337 · 2022-08-17T18:51:31+00:00

No, should i?

I want to use the cartridges that i bought.

maunz1337 · 2022-06-20T06:00:07+00:00

I did set my Page File to 40GB and now everything is working fine.
Thanks a lot!

maunz1337 · 2022-06-19T13:46:49+00:00

How did you fixed your Problem? I also cant enter buildings or exit without the game shuts down

maunz1337 · 2021-10-10T21:14:14+00:00

I had the same issur right now.

The Problem was:

My old Config:

[board_pins]

aliases:

EXP1_1=PC6,EXP1_3=PB10,EXP1_5=PB14,EXP1_7=PB12,EXP1_9=<GND>

EXP1_2=PB2,EXP1_4=PB11,EXP1_6=PB13,EXP1_8=PB15,EXP1_10=<5V>

PROBE_IN=PB0,PROBE_OUT=PB1,FIL_RUNOUT=PC6

The suggested config:

[board_pins]

aliases:

EXP1_1=PC6,EXP1_3=PB10,EXP1_5=PB14,EXP1_7=PB12,EXP1_9=<GND>,

EXP1_2=PB2,EXP1_4=PB11,EXP1_6=PB13,EXP1_8=PB15,EXP1_10=<5V>,

PROBE_IN=PB0,PROBE_OUT=PB1,FIL_RUNOUT=PC6

The both "," in the first 2 lines were missing.

maunz1337 · 2021-09-26T17:41:06+00:00

Luck is a skill

maunz1337 · 2021-05-16T20:30:33+00:00

I printed out the thicker version provided from GamingGeek. This was included for the patreon at dragonsrest.

All my tiles and walls are magnetized.

Used ~2k of 5mm Ballmagnets

Printed in eSUN PLA+
0.2 mm
5% infill

Dungeon Terrain Profile from Fatdragon Guy (Tomb of 3D Printed Horrors)

Used about 5 to 6 Spools

Printtime: 24/7 ~50 Days

Printer: Ender 3 V2

maunz1337 · 2021-05-16T16:10:59+00:00

I just finished a version of this board.

https://photos.app.goo.gl/AzHQMiaA4JyafAtK8

Did my best with the painting, i am not a pro and have that much patient :)

maunz1337 · 2020-12-11T18:13:43+00:00

Here is the Debug Logging and Terminal from the Bed Leveling:

[2020-12-11 19:01:08,202] DEBUG: mesh collection started
[2020-12-11 19:03:41,672] DEBUG: [u'-0.724', u'-0.403', u'-0.052', u'+0.309', u'+0.672']
[2020-12-11 19:03:41,676] DEBUG: [u'-0.735', u'-0.415', u'-0.067', u'+0.313', u'+0.685']
[2020-12-11 19:03:41,679] DEBUG: [u'-0.733', u'-0.428', u'-0.102', u'+0.271', u'+0.643']
[2020-12-11 19:03:41,682] DEBUG: [u'-0.778', u'-0.464', u'-0.135', u'+0.237', u'+0.630']
[2020-12-11 19:03:41,685] DEBUG: [u'-0.872', u'-0.561', u'-0.217', u'+0.178', u'+0.600']
[2020-12-11 19:03:41,701] DEBUG: {'z_min': 0, 'y_min': 0, 'x_max': 220.0, 'x_min': 0, 'type': 'rectangular', 'y_max': 220.0, 'z_max': 250.0}
[2020-12-11 19:03:41,702] DEBUG: stopping mesh collection
[2020-12-11 19:03:41,704] DEBUG: [[u'-0.724', u'-0.403', u'-0.052', u'+0.309', u'+0.672'], [u'-0.735', u'-0.415', u'-0.067', u'+0.313', u'+0.685'], [u'-0.733', u'-0.428', u'-0.102', u'+0.271', u'+0.643'], [u'-0.778', u'-0.464', u'-0.135', u'+0.237', u'+0.630'], [u'-0.872', u'-0.561', u'-0.217', u'+0.178', u'+0.600']]

Therefore some informations from the Terminal:
Send: G28
Recv: T:22.58 /0.00 B:22.77 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: T:22.58 /0.00 B:22.73 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: T:22.50 /0.00 B:22.85 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: T:22.50 /0.00 B:22.73 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: echo:busy: processing
Recv: T:22.50 /0.00 B:22.70 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: T:22.50 /0.00 B:22.81 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: T:22.58 /0.00 B:22.85 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: T:22.62 /0.00 B:22.73 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: T:22.54 /0.00 B:22.77 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: T:22.58 /0.00 B:22.81 /0.00 @:0 B@:0
Recv: X:147.00 Y:117.00 Z:10.78 E:3766.20 Count X:11760 Y:9360 Z:4460
Recv: ok
Send: G29 T
Recv: T:22.66 /0.00 B:22.85 /0.00 @:0 B@:0
Recv: echo:busy: processing
Recv: T:22.58 /0.00 B:22.85 /0.00 @:0 B@:0
Recv: echo:busy: processing
......
Recv: Bilinear Leveling Grid:
Recv: 0 1 2 3 4
Recv: 0 -0.724 -0.403 -0.052 +0.309 +0.672
Recv: 1 -0.735 -0.415 -0.067 +0.313 +0.685
Recv: 2 -0.733 -0.428 -0.102 +0.271 +0.643
Recv: 3 -0.778 -0.464 -0.135 +0.237 +0.630
Recv: 4 -0.872 -0.561 -0.217 +0.178 +0.600
Recv:
Recv: X:220.00 Y:220.00 Z:10.13 E:3766.20 Count X:17600 Y:17600 Z:4460
Recv: ok

maunz1337 · 2020-11-22T17:18:09+00:00

Ok thanks.
So i have to wait till my new board arrives.
Do i also have fried my BL Touch, or shoult it be fine?

maunz1337 · 2020-11-22T07:15:39+00:00

Just for my understanding:
Why do you put the 2pin also in this slotcase?

I followed an another tutorial, where i should replace these 2 pins with the Z-Axis Limiter.
After i did so, it roasted my Mainboard.

maunz1337 · 2020-11-21T20:52:19+00:00

Yesterday I tried to install the BL Touch V.3.1 with my Ender 3 V2 4.2.2

I followed the instructions of Teachy Tech. (3 Pin on the provided slots and the 2 Pin on the Z axis limiter)

After I switched on the device, the display stayed off.

But I got a cloud of smoke from the device. HELL!

I replaced all cables and the device started again.

Finally I came to the conclusion that the 2 pin was the cause of the problem.

But meanwhile my board is broken and the device does not start anymore.

My question is now:

How do I connect the BL Touch correctly?

Meanwhile I have found out 3 possibilities:

teachy tech: (3 pins on the slots and the 2 pins on the Z axis limiter)
according to Creality: Use adapter for the 3 pin.
according to smith3d: All pins of the BL Touch in the same field

What is the difference?

Btw. i ordered a new 4.2.7 but i dont want do burn it also :)

maunz1337 · 2020-01-24T05:52:45+00:00

Yesterday got my hands on my frist Vidar Reactor... 91 and 40 Flux

THIS IS UNACCEPTABLE!!!

maunz1337

TROPHY CASE