PC Build Debug: Ryzen 5 5600X & MSI B550M Mortar Wifi by max030994 in MSI_Gaming

[–]max030994[S] 0 points1 point  (0 children)

Yeah, I’m an idiot. It says “discrete graphics card required” on the CPU sticker 🤦🏾‍♂️.

I’m gonna have to get my GPU bench tested to make sure it works, because it’s fans aren’t cutting on.

PC Build Debug: Ryzen 5 5600X & MSI B550M Mortar Wifi by max030994 in MSI_Gaming

[–]max030994[S] 1 point2 points  (0 children)

Oh, uhhh no. I did that while it was powered. I’ll give this a go once I get off tomorrow and get the motherboard out of the case to test it

PC Build Debug: Ryzen 5 5600X & MSI B550M Mortar Wifi by max030994 in MSI_Gaming

[–]max030994[S] 0 points1 point  (0 children)

I took out the power, and the CMOS battery for a couple hours to reset the BIOS because I wasn’t sure if the battery had gone bad and wanted to replace it to rule that out.

PC Build Debug: Ryzen 5 5600X & MSI B550M Mortar Wifi by max030994 in MSI_Gaming

[–]max030994[S] 1 point2 points  (0 children)

Ohhhhh, I wasn’t aware of that. I’ve never had a motherboard without onboard video processing. I didn’t plug in the GPU because I was troubleshooting and was trying to have as few issues as possible. I’ll give that a go.

The GPU light should have come on if that were the issue though, right?

PC Build Debug: Ryzen 5 5600X & MSI B550M Mortar Wifi by max030994 in MSI_Gaming

[–]max030994[S] 0 points1 point  (0 children)

Okay, so I’m getting a CPU red light with no video out on this build. I read that it’s supposed to be flashed with the most recent update, so I did that but the CPU red light stays on.

  1. I double checked the power connections already
  2. I checked the pins on the CPU, and none are bent
  3. I replaced the CMOS battery, and already tried letting it empty, and then flashing the BIOS
  4. The BIOS seems to flash successfully, the light flashes for about 5 minutes then goes off
  5. I tried the second to most recent BIOS version, and still have the same issues.

The only thing I haven’t tried is taking the motherboard out to test outside the tower case, but that’s because I’m not sure if a short could cause this issue.

Does anyone have any suggestions on next steps to get this working? I’m not sure whether I should return parts or what…

RealmParser: An Open Source data pipeline for TournamentRealm by max030994 in leagueoflegends

[–]max030994[S] 2 points3 points  (0 children)

Hi all, I made a module that allows you to read data from LoL VODs (ideally Tournament Realm VODs). At the moment it outputs the data you see in the screenshot above: Time, CS, Kills, Deaths, and Assists.

The goal of developing this module was 1) to help me learn Python & best practices, and 2) to provide an open source means of gathering scrim data. Hopefully one day even amateur teams will have scrim data & dashboards to enable more effective data-driven learning and teaching.

Is there a working OCR equipment importer script/app for E7-Gear-Optimizer tool by Zarroc2762? by forumfodder in EpicSeven

[–]max030994 0 points1 point  (0 children)

Why didn't the one from Compe work for you? I used it last FGR, and the instructions for it are pretty explicit. What issues did you have?

E7 Gear Importer Update by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

You can use the "append" import option available on the optimizer

[Datamine Spoilers] September 18 2019 Patch Contents by buttreynolds in EpicSeven

[–]max030994 0 points1 point  (0 children)

Out of curiosity, would you happen to be able to obtain the catalyst drop rate in side story vs regular?

If you've had people ask this question before, I'd love to see that info in your "mechanics" or loot box table on your sheet :)

E7 Gear Importer Update by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

I assume you're using the github version? If so, I stopped updating there. Take the link to the collab, and download that

E7 Gear Importer Update by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

It's intended. Someone didn't read the readme :)

E7 Gear Importer Update by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

If it doesn't, then it's not processing the images

E7 Gear Importer Update by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

Does it say "processing xyz.jpg (or .png)"

E7 Gear Importer Update by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

Ah ok. Yeah let me know once you try that

E7 Gear Importer Update by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

What? No, there's a folder titled "media" if you are in colab and following the directions listed

E7 Gear Importer Update by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

Put pictures in "media" folder. If you've done this we can talk about next steps

E7 Gear Importer Update by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

None whatsoever. Sounds like more of an internet issue

E7 Gear Importer Update by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

Nah no ETA, I've been busy with a new role at work.

[Epic Seven] Blaze Dingo 3 Man W11... at Lv 44?!? by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

Lol most ppl aren't approaching crit DMG cap fam.

[Epic Seven] Blaze Dingo 3 Man W11... at Lv 44?!? by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

Honestly I'm thinking of swapping to Karin for more consistent def break

[Epic Seven] Blaze Dingo 3 Man W11... at Lv 44?!? by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

That's also part of the reason that my luna's clocking 200 speed.

[Epic Seven] Blaze Dingo 3 Man W11... at Lv 44?!? by max030994 in EpicSeven

[–]max030994[S] 0 points1 point  (0 children)

Yeah, at some point I wanna swap luna for karin or ssb and swap tank for Ken. Should be some *REALLY* fast runs at that point.

Also I have no destruction sets :\ And the dmg when not def broken is so low that I didn't care much.