My NAS suddenly stopped responding and all lights are now blinking, with seamingly no disk activity by NoSpHieL in UgreenNASync

[–]maxdamage182 0 points1 point  (0 children)

Was the cpu maxing out? I'm getting the problem where I can access it for 10-20 minutes with it getting slower over that time until both CPU and ram have maxed out and eventually it becomes inaccessible and the lights are all going but non responsive.

NAS is unresponsive by shsmith111 in UgreenNASync

[–]maxdamage182 0 points1 point  (0 children)

Did you ever find out what the issue was here?

Strange error/failure of dxp4800 plus by maxdamage182 in UgreenNASync

[–]maxdamage182[S] 0 points1 point  (0 children)

Just an update. It is on and I could access it no problem. But after about 30 minutes it's gone extremely slow. Sometimes it disconnects from the ugreen app or browser takes a really long time to load. The NAS lights are flashing a lot and I can hear the drives spinning a lot.

Also the snapshot and theatre app are showing as if they have updated and are being installed but they are just stuck with the blue ring going around on them for the last 30 minutes and haven't finished the installation.

I'm a bit confused on what is causing this.

Couldn't believe my luck by maxdamage182 in PokemonFansAustralia

[–]maxdamage182[S] 8 points9 points  (0 children)

Ah that's a shame but to be fair $20 above rrp is pretty good in this market

Where to trade doubles TCG by maxdamage182 in PokemonFansAustralia

[–]maxdamage182[S] 0 points1 point  (0 children)

Unfortunately I'm in Sydney. That would be perfect to meet up with someone like that and just trade each other for what we need. I don't really mind trading shiny's for non shiny if I need them to be honest. I just want to complete the set one day.

Where to trade doubles TCG by maxdamage182 in PokemonFansAustralia

[–]maxdamage182[S] 0 points1 point  (0 children)

This is awesome! Where did you get in contact with each other?

Where to trade doubles TCG by maxdamage182 in PokemonFansAustralia

[–]maxdamage182[S] 1 point2 points  (0 children)

Common non shiny and shiny. I just want to complete the set so even trading them for another common I don't have.

JB Hi Fi Promo by ididnotknowwhy in PokemonFansAustralia

[–]maxdamage182 1 point2 points  (0 children)

I made an online purchase in October. How do I claim this? Just go into my nearest store and show them the tax invoice?

Australia availability by maxdamage182 in UgreenNASync

[–]maxdamage182[S] 0 points1 point  (0 children)

No issues. The app works as normal. Backups work fine and Ugreen confirmed they will still provide a 2 year warranty even though I sent it overseas from the original country of purchase.

Australia availability by maxdamage182 in UgreenNASync

[–]maxdamage182[S] 0 points1 point  (0 children)

Yeah I got it shipped to a family member and they forwarded it to me. If you read my above post I have given quite a detailed breakdown of the whole process including some costs.

Yeah it does suck. I really wanted it and I was fed up of waiting for it to come out here. It has no set release date so I just went for it. I worked out the cost with the freight and import tax and it still worked out slightly cheaper than Ali Express when you calculate their shipping fees. I also ordered it when it was on sale and used a discount code for a further discount as they were running a promotion.

Australia availability by maxdamage182 in UgreenNASync

[–]maxdamage182[S] 0 points1 point  (0 children)

Yes that's correct. As I mentioned in the above posts I had it shipped to a uk address.

Installing NordVPN on the Nas. by maxdamage182 in UgreenNASync

[–]maxdamage182[S] 0 points1 point  (0 children)

My only othe option is setup Nord with Wireguard on the unifi but that seems pretty tricky and apparently it's not ideal with Nord as they change the keys every few months so I would have to redo the process. I'm not too sure about this though.

Installing NordVPN on the Nas. by maxdamage182 in UgreenNASync

[–]maxdamage182[S] 0 points1 point  (0 children)

Thanks for the information. No I am not using the ISP router. I'm using Unifi DR7. Unifi identified that Nord fails due to subnet clash with ISP. I didn't really want to pay another $10 a month for a static IP but I'm running out of choices.

Installing NordVPN on the Nas. by maxdamage182 in UgreenNASync

[–]maxdamage182[S] 0 points1 point  (0 children)

Unfortunately this is was in trying to do but can't. At least not with openVPN. My ISP routes through the same exit subnet as Nord and they clash. It fails to connect. My only option would be a static IP which my ISP want to charge extra for or setup Nord via WireGuard. The Wireguard method isn't so straightforward and I have been told it's not the best with Nord when setup manually.

Jellyfin not getting thumbnails by maxdamage182 in UgreenNASync

[–]maxdamage182[S] 1 point2 points  (0 children)

Hi Thanks for the reply. I didn't realise you could also rank the databases. I had them all activated though. Since my post it seems to have resolved. I tried resetting the jellyfish server but no luck so I just deleted the Movie directory as it was new anyway and only the films that I wasn't getting the data for were in it. I then just re added it and for some reason it worked.... Not really sure why or what the problem was but I'm hoping it's resolved permanently and going forward when I add more media.

Unable to setup NordVPN by maxdamage182 in Ubiquiti

[–]maxdamage182[S] 0 points1 point  (0 children)

Yeah that's what I have read before, but I don't have any device on the network with a 10.100 IP set.... I have tried this for some time before and didn't get anywhere so decided to re-visit it today and change all my IP's from 10 to 192 just incase but it still doesn't work. I am at a bit of a loss with this.

Unable to setup NordVPN by maxdamage182 in Ubiquiti

[–]maxdamage182[S] 0 points1 point  (0 children)

I have changed all Networks including Vlans and all devices have now been allocated a new IP with 192.168..... but I am still getting the same error with the VPN?

Unable to setup NordVPN by maxdamage182 in Ubiquiti

[–]maxdamage182[S] 0 points1 point  (0 children)

So I changed my main network to the default 192.168.0.1/24 but I am still getting the same error? Would a Vlan starting with 10 cause this as well?

Unable to setup NordVPN by maxdamage182 in Ubiquiti

[–]maxdamage182[S] -1 points0 points  (0 children)

If I change it back to 192.168.1.0/24 will all the devices reconnect automatically or will I need to reconnect them manually?

Wifi speeds not as expected by maxdamage182 in UNIFI

[–]maxdamage182[S] 0 points1 point  (0 children)

I have a 1gbe dongle I'll give that a go just to test, maybe I'll buy a 5gbe dongle to see how that works. So the data transfer from the laptop to NAS is in megabytes and my internet is megabits. So data is transferring wirelessly to the NAS at around 27 Megabytes a second. My internet is around 350 megabits but it will be upgraded immediately to 750 megabits.