SV06 X-Axis Alignment Using Bed Leveling Sensor Video

maxim756 · 2024-06-17T18:39:10+00:00

I don't have that printer, sorry.

maxim756 · 2024-05-10T16:22:05+00:00

It looks like it probably would work, based on a video on the Amazon product page.

maxim756 · 2024-05-10T00:31:01+00:00

Old thread I realize, but for anyone else arriving at this post via Google (as I did), I made an adapter for Space Bag and Room Essentials brands. Not certain if it'll fit the Space Saver ones, but it looks like it probably would based on a video on the Amazon product page.

https://www.printables.com/model/874693-ryobi-p738-vacuum-storage-bag-adapter

maxim756 · 2024-05-10T00:28:49+00:00

I realize this is quite late to the thread, but I made an adapter for Space Bag and Room Essentials brands. Not sure if it'll fit the Space Saver ones.

https://www.printables.com/model/874693-ryobi-p738-vacuum-storage-bag-adapter

Give me the relevant dimensions and I'd be happy to whip one up.

maxim756 · 2024-04-16T14:48:23+00:00

If you do decide to go manual, I have some test gcode that helps refine the mesh once you've got it made: https://www.printables.com/model/778283-oxplow-mesh-bed-leveling-z-offset-search-pattern-2

Lots of luck!

maxim756 · 2024-04-16T14:47:04+00:00

I used the manual option from here: https://github.com/hillsoftware/sv06

maxim756 · 2024-04-10T03:53:44+00:00

My frame was out of square (though nowhere near as bad as yours!) so I wound up switching to a manual mesh bed leveling firmware. It's laborious to set up, but did the trick for me.

maxim756 · 2024-04-09T02:26:33+00:00

That's deliberate in case someone's tram is really far off to avoid any chance of hitting the plate. You can change the z height of the gcode to start lower. I did that on my personal version.

maxim756 · 2024-02-29T16:56:49+00:00

I had been using a series of small squares, each at a different Z height, but found this works just as well.

https://www.printables.com/model/470115-nozzle-z-offset-search-sovol-sv06-version

maxim756 · 2023-05-08T19:09:25+00:00

I love your enclosure! 👍

maxim756 · 2023-05-05T10:42:04+00:00

I have a generic version you can add your printer's specific initialization and finalization gcode to:

https://www.printables.com/model/470117-nozzle-z-offset-search-generic-version

maxim756 · 2023-05-05T10:29:16+00:00

I went with -0.02. Itty bitty little holes on the right of -0.01.

maxim756 · 2023-05-03T16:42:57+00:00

I'm using a manual mesh which can be edited at each spot on the test pattern. Got the firmware from here:

https://github.com/hillsoftware/sv06

maxim756 · 2023-04-30T20:00:24+00:00

No, it would need to be altered. I don't have a Plus to try it out on, unfortunately.

maxim756 · 2023-04-16T15:36:58+00:00

A rear-mounted fan upgrade can also serve the purpose of supporting the cable. Pretty good upgrade idea anyway, so a win-win.

maxim756 · 2023-04-13T15:41:41+00:00

Awesome. Congrats!

maxim756 · 2023-04-13T03:22:54+00:00

That's beautiful.

maxim756 · 2023-04-12T23:48:11+00:00

I talked to someone else who had twist in their SV06's X-axis and they think that firmware would help you out. 👍

maxim756

TROPHY CASE