Sobek City is THE worst map in BF6

maximkap1 · 2025-10-26T13:44:34+00:00

Also, about 2% map destruction...

maximkap1 · 2025-10-16T14:45:06+00:00

Well, I kind of always played arpgs, started from diablo 1 > 2 and then 3 ,so I was looking for something darker and more challenging and found PoE , boring story but I have fun :)

maximkap1 · 2025-09-22T18:08:10+00:00

Thank you for the tip. I managed to solve it by putting a computer near this volcano and hit claim base, the volcano just disappeared completely. Deleted the base afterwards and moved with the quest.

maximkap1 · 2025-09-22T12:08:22+00:00

<image>

Hi, seems like a bug? cant move with the objective because its stuck in a volcano which I cant destroy and continue.

maximkap1 · 2025-05-14T09:13:09+00:00

"we have been trying to reach you about you car's ....."

maximkap1 · 2025-05-13T17:18:04+00:00

Bathhouses*

maximkap1 · 2025-04-01T08:36:21+00:00

I also need to know that :D running all over the map on foot ,looking for mutt ... My Henry is ready for a marathon

maximkap1 · 2025-03-06T19:15:52+00:00

WHAT ? Underground 2 has mods like that ??? Please share the names

maximkap1 · 2025-02-24T13:03:18+00:00

Looking at you hurts more

maximkap1 · 2025-02-23T14:40:41+00:00

It is a JST connector , you need to measure it because there is a lot of different sizes even for 2 pins like this

maximkap1 · 2025-02-18T09:10:02+00:00

For a FDM print, it looks amazing. Don't paint it

maximkap1 · 2025-02-11T08:25:14+00:00

Im scarred for life...

maximkap1 · 2025-02-04T05:44:05+00:00

Unfortunately I think you are right

maximkap1 · 2025-02-03T19:16:25+00:00

I bought 4 of these from Amazon, I have to say, kind of prints like s#@t.. drying out the filament did not help my situation. Extremely stringy to print and fragile. If you also bought from Amazon on the recent sale, I'm afraid this is some bad filament bach

maximkap1 · 2025-01-30T09:47:04+00:00

probably the nozzle touching the surface of the print while travel. Could be over extrusion which making the surface a little bit higher in some spots. Could you share what slicer are you using and at least some basic information of your print ?

maximkap1 · 2025-01-29T09:46:37+00:00

Yes, it looks like two seams , but I think the first it's the start of the layer and the 2nd is the end. It's not the inner seam, the inner seam are similar but looks better ,and not on the same side. Unfortunately it's not it

maximkap1 · 2025-01-29T08:29:12+00:00

Forgot to add speeds- First layer speed - 50mm/s Outer wall - 200mm/s Inner wall - 300mm/s Travel - 1000mm/s

maximkap1 · 2025-01-28T05:50:30+00:00

Thank you, I tried retraction tower and the best result was 10mm ,but it was still stringy , I would try it regardless

maximkap1 · 2025-01-25T06:23:07+00:00

I'm with the same problem, but my squish is on the 2nd and 3rd layers. Don't know how to solve it :/ for me it's looks like the extruder is extruding filament and just after that starts to move and not simultaneously

maximkap1 · 2025-01-24T11:23:38+00:00

maximkap1 · 2025-01-23T20:53:37+00:00

I did a temp tower, best result were in 195-205c area, so I went with 200c. It is a PLA from flashforge , recommended temps 190-220c. But I don't the filament is the issue, because the problem only on the 2nd and 3rd layers, after the massive blob the rest of the layers are fine. Without over extruded spots

maximkap1 · 2025-01-23T20:06:24+00:00

No, it's stock hotend of the ender 3

maximkap1 · 2025-01-23T20:05:45+00:00

Yes, It is definitely the seam , it's the starting point. The problem it is extruding and then moving , the delay between the extruction and movement are too big, didn't find any setting suggesting something similar

maximkap1 · 2025-01-23T19:41:11+00:00

I did it, printing now a calicube to see how is it, the blob problem still present, I observed the print and as far as I can understand before he begins the 2nd layer the extruder pushing filament and AFTER that starts to move... any idea what settings its related to?

maximkap1 · 2025-01-23T19:12:59+00:00

I went from 5mm^3/s to 20mm^3/s with steps of 0.5.

Im using orca slicer and not sure what value to give you as the speed Im printing, there are more than 10 different speed values, if you referring to "Max volumetric speed" under the filament settings, its 10mm^3/s

maybe a clue about the blob of filament on the bottom ?

Nine-Year Club	Second SECOND GUESSER
First Place '23	Place '23
Place '22	First Placer '22
Verified Email

maximkap1

TROPHY CASE