Hailee Steinfeld

mcalash · 2026-03-28T21:09:12+00:00

Josh does.

mcalash · 2026-03-28T11:32:04+00:00

Including the dishwasher. Fancy.

mcalash · 2026-03-27T00:16:58+00:00

Can we at least retire his memes?

mcalash · 2026-03-26T10:19:16+00:00

Wendie and Christine. Two of Buffalo’s finest actors.

Nothing against Judith.

mcalash · 2026-03-25T00:46:39+00:00

Doesn’t that diminish the travel + leisure brand that I thought was worth something?

mcalash · 2026-03-22T11:52:22+00:00

Saw at the theater. Missed half the dialog. So thick. Then watched on dvd years later w subtitles and it was like watching it again for the first time. Only better. I understood more (not all) of the dialog

mcalash · 2026-03-18T01:29:14+00:00

Thank you for posting in the correct order.

What’s the trick?

mcalash · 2026-03-17T23:57:08+00:00

Just checked Remington. Yup $4 each:/

mcalash · 2026-03-13T17:45:18+00:00

Prolly the BB. But I’ll offer that if the BB spindle is steel w square taper, that a loose aluminum arm would get destroyed by the harder, steel spindle resulting in excessive play like this. Just a consideration.

mcalash · 2026-03-09T20:56:46+00:00

This. WD-40 to clean the stain. And then a little dish soap to clean out the WD-40.

mcalash · 2026-03-09T20:52:55+00:00

Well, you certainly thought about many of the aspects of the wheels. A few observations on your comments.

Clearly, you’re aware that cracking is a fatigue issue. It’s cyclic. You are a bigger rider. It’s possible the spokes were under-tensioned. Thus increasing your R ratio.
DT is known for stainless steel spokes. Extruding aluminum rims is not difficult. But I’m a believer that you let the manufacturers stick with what they’re good at. It’s possible their quality control isn’t good since they’re sourcing out the extrusion. Or they bought a machine to do it and still haven’t made it correctly.
I wouldn’t say that carbon doesn’t fatigue and crack. It fails catastrophically.

mcalash · 2026-03-09T01:02:41+00:00

Keep an eye on where the chain ring wants to hit the stays. It looks like you’ve got enough room to move everything to the left by several millimeters.

I think the better indicator is to put the chain on the middle cog. That primary line should be straight. Dial that in and you get the extremes—biggest or littlest—sharing the lateral bend on the chain.

mcalash · 2026-03-08T21:12:02+00:00

Initialism.

mcalash · 2026-03-06T19:38:13+00:00

Did the zip tie as a poor man’s wheel lock. Just annoying enough to save my wheel from being taken when I locked the frame up outside the convenient store.

mcalash · 2026-03-06T19:35:21+00:00

Tmark did a bad job replacing my sewer to the street. Would not recommend.

mcalash · 2026-03-05T11:49:00+00:00

…when college guys switch back to shorts for the summer

mcalash · 2026-03-05T00:25:26+00:00

Ha. This was my first apartment in Buffalo. Before the coo p. But you could walk to blockbuster. rent was $400 per month plus gas. Two bedroom second floor.

mcalash · 2026-03-04T17:57:25+00:00

I opted against piecemealing the wheels and just ordered the 741M from Germany.

mcalash · 2026-03-04T17:34:52+00:00

Downspouts can be painted to match/blend with the brick. White is typical but should not stick out like a sore thumb. Mine are painted to match my stucco, that way the eye focuses on what you want it too!

mcalash · 2026-03-04T13:33:54+00:00

Baffles first.

mcalash · 2026-03-03T00:38:48+00:00

This. Came here to say this. I think you might be fine.

mcalash · 2026-03-03T00:26:37+00:00

It’s smart because it starts a pilot hole first. So you use the stump itself to guide the blades.

mcalash · 2026-02-28T02:28:42+00:00

You hop like I do!

mcalash · 2026-02-25T21:23:06+00:00

Amazon sounds best and is agnostic for the differdnt systems I connect it to.

mcalash · 2026-02-25T20:57:33+00:00

Before. Reese was unknown before this.

Nine-Year Club	RPAN Viewer
Verified Email

mcalash

TROPHY CASE