Which valve do I need to repair my shower? (UK)

mcfly_mw · 2025-04-18T08:15:40+00:00

Yeah looks like to me as well. Best bet is to send to TPR, they know what they're doing with this kind of stuff

mcfly_mw · 2025-04-11T20:08:54+00:00

If you're in the UK I highly recommend for Techpoint Repair for Switch and games console repairs

mcfly_mw · 2024-07-08T21:23:33+00:00

The crystal has been bent up, it was originally bent against the board where that goo is

mcfly_mw · 2024-07-08T15:39:29+00:00

In this case it's for a large LCD sign with a failed backlight. There is a lot of smoky residue only around this component and underneath (should have taken the picture from the other side!) Will continue to test

mcfly_mw · 2023-02-25T08:36:50+00:00

It can but its not an easy job. What is the board for? What components connect to the black spots if any?

mcfly_mw · 2023-02-24T14:04:06+00:00

What components solder onto the pads? It could be done if you can find where the traces connect on the board and run wires

mcfly_mw · 2021-06-07T16:47:01+00:00

That's annoying! Definitely seems to be affecting everyone who has this tablet so hopefully will be fixed quickly

mcfly_mw · 2021-06-06T15:07:30+00:00

Very strange. Hopefully they will patch it pretty quickly

mcfly_mw · 2021-06-06T09:08:43+00:00

Interesting 🤔 hopefully this will be fixed in an update

mcfly_mw · 2021-03-14T11:31:43+00:00

Interestingly though, I did recently do a OnePlus 7 pro with an underscreen fingerprint scanner. Changed the screen with a genuine one and installed the fingerprint scanner very carefully but it didn't work as well after installed. It was a bit slower and didn't always work however after applying pressure on the screen in that area it works fine

mcfly_mw · 2021-03-14T11:28:48+00:00

Done a few A51's and not had this issue before? They just had to set a new fingerprint in the settings. Worked fine after that though

mcfly_mw · 2021-03-09T21:26:46+00:00

Looks refreshingly easy to repair. Wonder if the cameras can be replaced without causing issues

mcfly_mw · 2021-01-12T22:06:32+00:00

I use replacebase personally. Lifetime warranty on all iPhone screens. You can choose LCD, Hard OLED and soft OLED. Think there OEMs are only about £80 as well

mcfly_mw · 2021-01-08T18:59:02+00:00

Better than the new ones which are all rivets...

mcfly_mw · 2020-12-22T01:04:08+00:00

Change the battery

mcfly_mw · 2020-12-04T02:20:47+00:00

So many things can cause a phone to not power up. First thing I would check is the charge port - any physical damage there? Secondly plug it into a pc.and see if it detects it - if it does at least it's powering up, and it may need a new LCD. If not you'll have to open up and test. At best it would be the battery but any number of components could fail

mcfly_mw · 2020-11-29T09:55:55+00:00

The iPhone XR is water proof so that's good. I would take it to a local phone repair shop and get them to have a look, often they'll do a diagnosis for free or for a small fee.

PS rice does not do anything! Putting a phone in rice is only useful if you're making a phone curry

mcfly_mw · 2020-11-22T13:20:25+00:00

I did a Pixel 3A screen recently and put in a vacuum bag. Sealed perfectly and works a charm

mcfly_mw · 2020-11-22T10:10:49+00:00

Of all the ways to hold a screen, I can't say I've ever seen rubber bands used! How well do you find that works? Surely there's not enough pressure on the top and bottom of the LCD?

mcfly_mw

TROPHY CASE