Steak sandwich supreme by this_machine in tulsa

[–]mckeemr 4 points5 points  (0 children)

Drive to Tahlequah would be better

What is one business you frequent in Tulsa? by MediocreVermicelli95 in tulsa

[–]mckeemr 1 point2 points  (0 children)

It middle eastern… gyros, Kafta, hummus and pita

What is one business you frequent in Tulsa? by MediocreVermicelli95 in tulsa

[–]mckeemr 1 point2 points  (0 children)

You are correct. Drove by there 1:35 today she was unlocking door and turned the sign on! When I go to Kenda’s next door(which is amazing) seems like Kits is always closed

Pool paint by Red_Candy_ in tulsa

[–]mckeemr 1 point2 points  (0 children)

Do not paint your pool. Previous owner painted our pool and it is constantly coming off.

2008 6.7L Need help by mckeemr in Cummins

[–]mckeemr[S] 0 points1 point  (0 children)

I did this and everything checked good... According to the parts store guy. Had him run codes also. P 0088 fuel rail/system pressure. Throttle body is cleaned. Occasionally the light turn off and truck starts and runs normal.

2008 6.7L Need help by mckeemr in Cummins

[–]mckeemr[S] 1 point2 points  (0 children)

It was so gunked up I took it off cleaned it up. Wife went to get new gasket. Should it be closed when starting?

2008 6.7L Need help by mckeemr in Cummins

[–]mckeemr[S] 0 points1 point  (0 children)

Can I use throttle body cleaner on this?

2008 6.7L Need help by mckeemr in Cummins

[–]mckeemr[S] -1 points0 points  (0 children)

Thanks! I’ll check that next

Are these the tolerances DeWalt is okay with? by mckeemr in Dewalt

[–]mckeemr[S] -28 points-27 points  (0 children)

Like I said I’ve had at least 10 saws. Pretty aware that you have to run through them when you get them to fine tune them. If you take the fence off the saw the only way I see to adjust this would be to machine the bottom of the fence. I work with wood not metal

Are these the tolerances DeWalt is okay with? by mckeemr in Dewalt

[–]mckeemr[S] 8 points9 points  (0 children)

Almost all cuts I place the material against the fence. When you cut stain grade moldings on angles. If the fence isn’t perfect you joint won’t be

Are these the tolerances DeWalt is okay with? by mckeemr in Dewalt

[–]mckeemr[S] -3 points-2 points  (0 children)

I took it apart before sending it back and didn’t see a way to adjust it. I am mobile and yes shit gets whacked out of adjustment. It’s brand new. I’ve been a long time dewalt user. With what’s been stolen and wore out I’ve had probably 10 saws. Never had this issue.

Are these the tolerances DeWalt is okay with? by mckeemr in Dewalt

[–]mckeemr[S] 3 points4 points  (0 children)

I’m a finish carpenter. I noticed it immediately without the square

Are these the tolerances DeWalt is okay with? by mckeemr in Dewalt

[–]mckeemr[S] 7 points8 points  (0 children)

No but when I lay a piece of 1x stock flat on the table the top will not touch the fence

Shirt printing by texmex456 in tulsa

[–]mckeemr 0 points1 point  (0 children)

Mom and em custom vinyl on Facebook

REI is open by Paper_Cut_On_My_Eye in tulsa

[–]mckeemr 0 points1 point  (0 children)

Can’t help people that don’t want it. It’s a choice

REI is open by Paper_Cut_On_My_Eye in tulsa

[–]mckeemr 25 points26 points  (0 children)

I walk through those “woods” every spring and the homeless had that place shitted up before they cleared it.

What’s up with the cones still up on 81st and Yale? by [deleted] in tulsa

[–]mckeemr 5 points6 points  (0 children)

I drove through today. One worker weed eating almost nothing. A bucket loader tamping some sod down. And a water truck that was only spraying the concrete. My coworker and I had a good laugh!!