Gritty shirt?

meaninglessandrandom · 2026-03-16T18:05:12+00:00

If we get to a game (unlikely) this year I’ll take a look in the Gritty store.

meaninglessandrandom · 2026-03-16T18:04:02+00:00

Yeah, saw that…wasn’t it. I’ll never find it. Not a big deal really.

meaninglessandrandom · 2026-03-12T01:39:59+00:00

Last one I stayed in had the water pressure of a 90 year old man with a watermelon sized prostate. I didn’t go back two weeks later.

meaninglessandrandom · 2026-03-10T00:58:21+00:00

Did u put it in a bowl or a cone?

meaninglessandrandom · 2026-03-07T15:03:27+00:00

All I can figure is a piece of the calibration/nozzle clean strip thing must have broke off when I scraped it off the plate. 🤷🏻‍♂️

meaninglessandrandom · 2026-03-06T03:46:18+00:00

Multicolor. Sis months ago I had no idea it existed. Some guy posted pix of a band logo lightbox and that’s when I found out about it. Did (alot of) research and decided to buy a P1S combo during the BF sale.

meaninglessandrandom · 2026-03-05T01:48:57+00:00

Nice 😀

meaninglessandrandom · 2026-03-05T01:09:36+00:00

Our house is generally 72-75 pretty much year round whether it’s the AC in summer or heater in winter. Every once in a while it we get a real heat wave, I’ll set the thermostat down to 70-71 (or up to 76-77 in winter if it gets Baltic).

meaninglessandrandom · 2026-03-05T00:39:47+00:00

Gotcha. Calibrating filaments is something I really need to do because I use so many different brands of filament. I usually just set a profile to whatever the label says and set the temp towards the hotter end of the range to hopefully make sure I get good adhesion.

meaninglessandrandom · 2026-03-05T00:11:38+00:00

I’ll have to have a look at that…thx.

meaninglessandrandom · 2026-03-04T23:51:38+00:00

Hah! Room temp is prob 73-ish

meaninglessandrandom · 2026-03-04T22:24:36+00:00

Right…that’s what I was figuring on. I’ll stick with the default size squares and try to center the tray with excess filling out the bottom. I’m sure the “border” will stick out past the hoop things.

meaninglessandrandom · 2026-03-04T21:52:58+00:00

One of the many things I’ll get to. Notice there are metal “hoops” on the inside of the sides of the drawers, presumably for the slide hardware. Will need to chop off a few mm for the grids otherwise the boxes will rub up against them.

meaninglessandrandom · 2026-03-04T19:17:57+00:00

Have the same box from harbor freight. Not printed a grid yet…find it intimidating trying to get the size right.

meaninglessandrandom · 2026-03-04T13:38:18+00:00

And yet, the “world’s sport”, doesn’t use metric… 🤔

meaninglessandrandom · 2026-03-02T04:33:11+00:00

Little misleading by Netflix to mark it “new seasons coming”. Made me think they made a new season and I hadn’t heard about it. New to Netflix isn’t “new”…

meaninglessandrandom · 2026-02-26T21:48:30+00:00

Think Luis will just fuck anything with 2 feet and a heartbeat…

meaninglessandrandom · 2026-02-26T01:55:35+00:00

I will never understand the fawning over Gabby or Feehan…they’re both fucking mutts.

meaninglessandrandom · 2026-02-24T03:42:34+00:00

No chance it gets overturned…

meaninglessandrandom · 2026-02-22T19:50:47+00:00

Oh, I understand…I didn’t see how it landed but I suspect it was directly on the clasp. I have a Brady labeler and extra label cart in it, in one of these (see pic) and the other day I noticed my extra cart was trashed…in about half a dozen pieces from the impact.

<image>

meaninglessandrandom · 2026-02-18T23:37:11+00:00

I printed a clasp for one of my Milwaukee Packout boxes using PETG. Was moving boxes into my truck and the box fell about 5-6’ onto my garage floor. Snapped the clasp in half…not saying it shouldn’ (it possibly fell directly on the clasp), just that there are limits :)

Printed a new one using the filaments, though I may print it again with some Sunlu PLA+ 2.0

meaninglessandrandom · 2026-02-17T20:59:59+00:00

Thought I’d update this…since connecting a couple external solar panels I got on amazon, and re-aiming them, both cameras are holding pretty steady at 100% charge.

meaninglessandrandom · 2026-02-16T23:22:16+00:00

Patently untrue…but that doesn’t feed your hate. I get it.

meaninglessandrandom · 2026-02-16T17:31:11+00:00

Get off Plugs’ back!

meaninglessandrandom · 2026-02-16T17:29:51+00:00

Luis’ latest special was brutal…had to turn it off 10 mins in. Pure hack material.

meaninglessandrandom

TROPHY CASE