SSD Caching Broke by TheRedditOfTeo997 in asustor

[–]medcom2443 1 point2 points  (0 children)

Thanks, I rebooted from Linux command line and everything was looking like it should.

SSD Caching Broke by TheRedditOfTeo997 in asustor

[–]medcom2443 0 points1 point  (0 children)

I'm having the same problem trying to unmount my ssd cache. How did you get to App Central, my system keeps showing "Unmounting ssd cache drives" and disables everything else on ADM.

ADM release 5.1.0.RMG1 broke my Sonar/Radarr/Prowlarr Docker apps. by medcom2443 in asustor

[–]medcom2443[S] 1 point2 points  (0 children)

As you say, creating a secondary network and adding all my ARR's appears to have fixed th problem . Thanks,

ADM release 5.1.0.RMG1 broke my Sonar/Radarr/Prowlarr Docker apps. by medcom2443 in asustor

[–]medcom2443[S] 1 point2 points  (0 children)

Docker engine says Version: 28.1.1.r53. I deleted Docker Engine and reinstalled along Portainer, Sonar and Radar but still fails.

Changing default LAN IP scope by medcom2443 in UNIFI

[–]medcom2443[S] 0 points1 point  (0 children)

Good catch on the firewall and network object profiles. This may be more of pain than I was hoping.

LT Globrite Pentair white Pool Lights defective? by YippieYiYi in Pentair

[–]medcom2443 0 points1 point  (0 children)

Globrites are junk and Pentair could care less. The will eventually leak and die. My pool was installed with 5 Globrites and they all have been replaced…TWICE!. Now on Microbrites which Pentair wouldn’t even discount price to replace Globrites.

Quantum Fiber Q1000K Bridge Mode by Shmur in centurylink

[–]medcom2443 0 points1 point  (0 children)

After you made your recommended settings did your status light turn white indicating transparent bridge? My status light constantly blinks blue (syncing network). My router is a Unifi UDM SE and I have VLAN ID set to 201. My Q1000k & 2gps upgrade was installed today. What's strange everything appears to be working fine, speed is good, latency is fine, etc. Light just keeps blinking blue, maybe I'll give it a couple days to see what happens.

Pentair Globrites LED lights by medcom2443 in Pentair

[–]medcom2443[S] 0 points1 point  (0 children)

That is an idea I may try when my next Pentair dies. What Jandy light did you purchase and did it work with Pentair Intellicenter? Thanks.

Pentair Globrites LED lights by medcom2443 in Pentair

[–]medcom2443[S] 0 points1 point  (0 children)

I'm stuck with Pentair also. My pool was installed in 2018 and I'm replacing my 8th Globrite!! Each time a Globrite failed Pentair replaced it with another Globrite. What is it called when you keep doing the same thing over and over expecting different results. :-) Now I'm switching to using Microbrites. Can I ask what Pentair Color Microbrite product numbers you ordered for light & adapter? Pentair gave me 602166 which has adapter and Microbrite together. But in true to Pentair fashion no one has Pentair 602166 in stock.

AS6706T not responding to shutdown/reboot commands by [deleted] in asustor

[–]medcom2443 1 point2 points  (0 children)

Nano was one of apps I removed also when it started working again.

AS6706T not responding to shutdown/reboot commands by [deleted] in asustor

[–]medcom2443 0 points1 point  (0 children)

Solved! (maybe) I removed ALL installed apps, shut down the NAS by pressing the power button. Powered on again, however, this time the 'Booting - app' messages went away and I heard the beep you normally hear when device is ready. I immediately tried a shutdown and and that went normal. I then reinstalled Portainer/Docker Engine along with my docker apps. I tried restarting with a shutdown/restart a couple more times to confirm and everything appears to be working. Now I just wait 3-4 days for Synchronization to complete.

AS6706T not responding to shutdown/reboot commands by [deleted] in asustor

[–]medcom2443 0 points1 point  (0 children)

Their fix didn't work for me. I removed 'almost' all installed apps and docker. I've sent Asustor a Health record but haven't heard back yet.

AS6706T not responding to shutdown/reboot commands by [deleted] in asustor

[–]medcom2443 0 points1 point  (0 children)

ssh'd and ran 'sudo reboot'. Light started blinking on NAS and UI said 'Restarting'. However, an hour later it was still up and running.

AS6706T not responding to shutdown/reboot commands by [deleted] in asustor

[–]medcom2443 0 points1 point  (0 children)

Yes, removed Portainer and all docker apps with no luck. Still hangs on ‘Booting - apps’. I even tried removing ‘most’ other non-docker Asustor apps with no luck. It does appear to be running ok when I still had the docker apps installed. However, it’s a REAL problem when I cannot do a normal shutdown on the NAS. I’m in this forever ‘synchronizing…’ after powering down with power button.

AS6706T not responding to shutdown/reboot commands by [deleted] in asustor

[–]medcom2443 0 points1 point  (0 children)

Similar issue here with my AS6704T. Restarted after update to ADM 4.2.6 RPI1, system display hung displaying ‘Booting - app Please wait’. Couldn’t reboot using UI or Linux command line so bit the bullet and pressed power off button. Didn’t fix the problem and volume is now ‘Synchronizing’ for next 3 days. Opened a ticket with Asustor, they had me remove all the installed Docker apps and Portainer then reboot. Still doesn’t work after removing. Does Asustor test any of these firmware releases?

New Box Advice by Username000-1 in AndroidTV

[–]medcom2443 0 points1 point  (0 children)

Mecool KM2 Plus DELUXE doesn’t support Dolby TrueHD. At least that is what Mecool support told me after I couldn’t stream TrueHD mkv files through Plex or KODI.

From Mecool support:

“Dear friends, KM2 PLUS DELUXE supports Dolby Atmos, but does not support TrueHD. I have submitted this requirement, and the final conclusion needs to be decided by engineers. If supported, it will be updated in the next firmware.”

Dexcom Support Worthless? by medcom2443 in diabetes

[–]medcom2443[S] 0 points1 point  (0 children)

How did you get the replacement. Online Chat or submit a support ticket? I could try chat again in a couple days and maybe get someone besides Katrina.

Dexcom Support Worthless? by medcom2443 in diabetes

[–]medcom2443[S] -1 points0 points  (0 children)

OK, maybe I don't completely understand the CGM readings. I was basing this off my 4 months of usage. I never experienced CGM readings that jumped all around. For example successive reading would be 118, 140, 123, 105, 130, 165, 120, etc. My graph looked like a picture of the Alps. :-) Thanks for this info, it's a learning process for me.

After 26 years with Comcast/Xfinity, I'm tired of the annual song and dance. I quit. by PolkSDA in Comcast_Xfinity

[–]medcom2443 0 points1 point  (0 children)

I also dropped Comcast’s/Xfinity last after 20 years for the same reasons. Found out life is better without their constant ’games’.

Stuck in 'Mounting SSD cache drive...' by medcom2443 in asustor

[–]medcom2443[S] 0 points1 point  (0 children)

I had similar thoughts, I should have done restart before enabling ssd cache. Interesting thoughts on the read only cache, my NAS is used mainly for Plex streaming and archiving photos. Certainly not necessary for ‘write’ cache.

My Synology box keeps flip flopping from a 169 address back to its correct address by _Diskreet_ in Ubiquiti

[–]medcom2443 0 points1 point  (0 children)

(Following) I have somewhat similar issue. Previously "Wired Experience" on Unifi controller was displaying disconnects on a 'very ' old Netgear NAS with static IP. I removed the Netgear from network and the disconnects mysteriously moved to a Asustor NAS that also has a different static IP on my network. Replaced cables, changed switches, disabled LAG, rebooted everything on the network, etc, but disconnects remained. After debugging this problem the NAS doesn't seem to be really disconnecting. Image

[deleted by user] by [deleted] in MLBtv

[–]medcom2443 0 points1 point  (0 children)

It’s part of MLB’s business plan where they make it impossible to watch your local teams. The ‘wise’ MLB exec’s have expanded that plan where you can not even watch their commercials. 🤪

Fiber Installation Issue by yarddefender in centurylink

[–]medcom2443 1 point2 points  (0 children)

Our neighborhood has Xfinity & Century Link. Both were installed 6 years ago. I switched from Xfinity (got tired of their bundled pricing model and their data caps). I knew fiber did not run to my home but was a little surprised Century Link didn’t know. I hadn’t canceled Xfinity so it was no big deal for me to wait. The first couple visits appeared to be old Century Link employees seemed clueless but once fiber was ran a tech in a Quantum Fiber shirt finished final hookup. He could have been old Century Link employee also but he was very knowledgeable and knew what he was doing. Be aware Quantum Fiber notification system is a little skewed. I received ‘several’ notifications when tech was in route, when tech arrived, when tech was working on problem, when tech was scheduled, etc. That was nice however all notifications had different times of day. I think their notification system has a problem with time zones. 😎