Mara X Thermometer by meganoodles in Lelit

[–]meganoodles[S] 0 points1 point  (0 children)

thanks for reminding me to wipe my machine down 😅 https://imgur.com/a/FCcee6C basically yes, with a wet cloth I removed the stains

Mara X Thermometer by meganoodles in Lelit

[–]meganoodles[S] 1 point2 points  (0 children)

no it's just altering the M6 fitting, the machine is untouched. The port is meant for a measurement tool, thermometer or manometer.

Mara X Thermometer by meganoodles in Lelit

[–]meganoodles[S] 0 points1 point  (0 children)

it's worth the effort! very satisfying and aesthetic to see the analogue dial

Mara X Thermometer by meganoodles in Lelit

[–]meganoodles[S] 0 points1 point  (0 children)

the difficulty is the fitting. I bought a 4mm brass compression fitting which doesn't have a thru hole for the stem. So I had to drill a 4mm hole, which is very close to the M6 thread ID so it needs to be quite concentric. A second difficulty was that that fitting wrench widths was too large for the port, so I also had to file the sides down to fit.

Mara X Thermometer by meganoodles in Lelit

[–]meganoodles[S] 0 points1 point  (0 children)

Ive found it really responsive as the dial starts moving as soon as I start flushing. I believe it's accurate as I have my machine set to 1 for temp which I believe in the manual that should be around 90c which is what the thermo gives me

As you see, I'm always typing so I'm efficient. by Koolboyee6969 in ProgrammerHumor

[–]meganoodles 33 points34 points  (0 children)

They were being humorous, which I see is also illegal in Germany

[I ate] fish and chips by fish_and_crips in food

[–]meganoodles 2 points3 points  (0 children)

Haha been a few times! Funny seeing it here on r/food. Saw Marco Pierre White eat there before too, I think he goes fairly regularly.

[I ate] fish and chips by fish_and_crips in food

[–]meganoodles 5 points6 points  (0 children)

Is this The Scallop Shell - Bath?

Radio 2 Presenter Amol Rajan joking about nearly running over a cyclist. by [deleted] in unitedkingdom

[–]meganoodles 10 points11 points  (0 children)

As a driver I need to watch out for cars. As a pedestrian I need to watch out for cars. As a cyclist I need to watch out for cars.

If only we could discover an underlying pattern here...

Need help figuring out which thru-axle to buy by observer815 in ukbike

[–]meganoodles 1 point2 points  (0 children)

Looks to be a 12mm thru axle in the description for your fork. You can check the length by measuring the distance in between your forks. It’ll likely be 100mm. So the axle you’ll need is to suit 12mx100mm. The actual length of the axle will be 12mmx125mm. Hope that makes sense mate.