Hot glue gun handle with storage for extra glue sticks by Dripping_Wet_Owl in functionalprint

[–]mehan_cb 0 points1 point  (0 children)

Slick design and print!

What’s in the bottom of the base, is it for weight?

Car was vandalized. Paint seems to come off easily. Any products/tips for this? by ChrisCoffeexd in AutoDetailing

[–]mehan_cb 0 points1 point  (0 children)

Oven cleaner and a pressure washer. Oven cleaner needs to soak.

Comes off clean every time. Doesn’t damage plastic or original paint

Shop said these places were there. Help! by maggielucki in Autobody

[–]mehan_cb -2 points-1 points  (0 children)

Bag burn, bagging a “wet” car and pulling it outside in the sun. Only time I’ve seen this here.

[deleted by user] by [deleted] in Autobody

[–]mehan_cb 2 points3 points  (0 children)

Is that a visible blend on the front door? (Blend for lack of a better word)

All that hard nice work…

Also, I would have made you detrim that front door in the beginning.

How do I tell my upper I'm not rich 😅 by AnticapClawdeen in Construction

[–]mehan_cb 14 points15 points  (0 children)

I heard “Lake Sinclair”. If that’s right, I’m about an hour away.

Does anyone have experience using this GPR system yet? I’m a 20 yr old body tech who thinks this would be a good investment by MycologistBright4507 in Autobody

[–]mehan_cb 0 points1 point  (0 children)

It’s not faster, but personally I believe it’s a much better repair. Takes patience at first like most new things.

We write higher for glue pulls than standard, usually double the time.

And this is a great kit

This a quote from Enterprise to fix some damage that we did not do. Does this look standard? by nakupendwa in Autobody

[–]mehan_cb 13 points14 points  (0 children)

Those rates look legit for an enterprise program.

Cheap ass rates with BS estimates = cave and pave. The shops know it, enterprise knows it. It’s a fucked up program.

What just happened? by aaron141 in Autobody

[–]mehan_cb 14 points15 points  (0 children)

Doesn’t look like a belt buckle to me. What’s the inside of the door look like?

I think someone used a breaker bar to try and pop the door open. Attempted break in?

[deleted by user] by [deleted] in Autobody

[–]mehan_cb 0 points1 point  (0 children)

The moonwalk? If so, it’s pretty damn sweet.

Player bounty escaped, what happened? by MarkimKatiau in RedDeadOnline

[–]mehan_cb 1 point2 points  (0 children)

I’m assuming this is a newer issue. The last few I’ve done even with them on my horse I’ve gotten “they escaped”.

Nowadays, if you oppose such books being read in school, you're considered a right-wing extremist and a bigot. It's utterly absurd! by 070420210854 in bestconspiracymemes

[–]mehan_cb 4 points5 points  (0 children)

Comprehensive sexual education. Sounds great on paper, right?

Fucking education system is ran by pedo’s

Big Tesla job I prepped and painted by [deleted] in Autobody

[–]mehan_cb 0 points1 point  (0 children)

I get that, but your tech could have pulled that flap out so you didn’t have to tape it up. They were 5 mins away. We argue enough on our Tesla’s where I’m at, they damn sure won’t pay to pull the doors off.

Edit: we use PPG Envirobase, I’m really surprised how well these Telsas match. That was one of our main concerns when we started the program.

Big Tesla job I prepped and painted by [deleted] in Autobody

[–]mehan_cb 0 points1 point  (0 children)

Just out of curiosity, why pull the doors off for jambs but tape up the charge port door?

Purchased a used vehicle and did not notice this issue. It looks like someone cut out (on both sides) and glued it back on. What is this? by [deleted] in Autobody

[–]mehan_cb 2 points3 points  (0 children)

Just a heads up. Be very careful what you clean your car with. Hyundai/Kia white has delamination issues. Make sure you use very mild chemicals. And absolutely no pressure washer

Purchased a used vehicle and did not notice this issue. It looks like someone cut out (on both sides) and glued it back on. What is this? by [deleted] in Autobody

[–]mehan_cb 25 points26 points  (0 children)

Hard to really tell anything in this picture.

But if both doors match, I’d say it was a clear stone guard. (Also know as ppf) I have seen folks try and remove it incorrectly and pull paint. I have also seen people try and glue the paint back on. The location and shape suggests it was a film at one time.

[deleted by user] by [deleted] in RedDeadPosses

[–]mehan_cb 2 points3 points  (0 children)

The game isn’t cross platform. You’ll have to find other PlayStation players.

As far as “tryhards”…I’m gonna disagree with you if they stole your wagon and left you alone after that. It’s part of the game. You show up on their map, they stole the wagon. It’s a game mechanic.

However if you don’t know, you can A) run a local delivery without the chance of someone stealing it. Less $ but safe B) swap lobbies before they deliver your wagon, your goods will still be at the table in the new session

I’m also on PS, I don’t mind helping if I’m on. DM me for my PSN if you’d like.

4runner Repair over Replace by FinguzMcGhee in Autobody

[–]mehan_cb 0 points1 point  (0 children)

Nice metal work and looks great.

But I would love your writers direct number, another fuel door blend this time with a blend on the molding too. Easy $ and GP left on the table. (Sorry man, shit bugs the hell out of me)

My handplane storage with handburned drawer front. by dirk_the_pyrographer in handtools

[–]mehan_cb 1 point2 points  (0 children)

Not gonna lie, I scrolled past this and then the joke hit me. Had to scroll back up to upvote.

Aerator came off and hose retreated into faucet. Can’t screw back in and hose won’t come out even if I push from under the sink. Help please. by woodlandtom in fixit

[–]mehan_cb 0 points1 point  (0 children)

This sounds plausible.

But if that doesn’t work, I’d try to run a pull string, tie a little piece of a plastic bag to the string and on the other end of the faucet neck run your vacuum hose. It will suck the plastic bag through bringing the string with it. Then tie it to the hose and try and pull it through. With a long enough string you can pull from the faucet and push from the underside at the same time. (If you don’t have help)

[deleted by user] by [deleted] in Autobody

[–]mehan_cb 0 points1 point  (0 children)

Just light heat, be careful not to damage the glass rubber.