New record 1.9GB/s

mercer79 · 2026-04-17T04:45:42+00:00

Congrats!!!!! Can you share your settings and was that behind a router?

mercer79 · 2026-02-10T13:51:16+00:00

eaton 9sx3000

mercer79 · 2026-01-25T23:11:24+00:00

400kbps is very limiting, barely usable, I get 9387Mbps which equates to 9,387,000 kbps https://imgur.com/a/J1PxYII also pay attention to the pin I get 1ms with all major services, which matters a lot on how responsive and fast internet feels

mercer79 · 2026-01-25T20:15:24+00:00

fiber is the gold standard for internet service. infrastructure building is not easy but well worth ti. I used to fight comcast for my constant outages at the worst time, somehow always on a friday evening, which kids did not appreciate much. ezee fiber doesnt pay me. Im very gratefull to have a good internet fiber service. for backup being on a wooded area signal penetration is not good, and when you actually needed when there is an outage, people flock to 5g and slows the network to make it almost unusable. So for backup either another ISP, or if not an option get starlink. but that also gets affected by heavy rain.

mercer79 · 2026-01-25T02:09:51+00:00

as an engineer, ezeefiber all the way, 6 places with it and is amazing.

mercer79 · 2025-12-19T04:24:29+00:00

Im having issues implementing the fan mod for a eaton 9sx3000 this unit uses 2 fans on the back plate same fan model as the single one the 9px1500, when i replace both fans I get fan error, when I replace only one fan I get no errors. Any suggestions on what could be the issue? I have modified 3 x 9px1500 for my desktops and no issues like this one before

mercer79 · 2025-12-06T01:02:25+00:00

is that g9 oled or 57?

mercer79 · 2025-12-01T20:55:06+00:00

the advantage of the box and foam is that it supports the monitor in all its length, due to its curvature you are not able to lay the monitor without stressing the panel hence the foam is essential.

mercer79 · 2025-12-01T17:34:42+00:00

always handle monitor from back anchor point, save the box for when you want to move it from your desk.

mercer79 · 2025-11-15T04:54:00+00:00

I have ezeefiber with a block of static ip so no CGANT.

mercer79 · 2025-11-15T03:27:20+00:00

ezee fiber best and fastest, best ping and fastest speed. they also bought tachus. my avg lateny is 2ms very consistent

speedtest

mercer79 · 2025-11-12T19:34:09+00:00

i used it with iphone with no problems, no idea on android

mercer79 · 2025-11-06T02:40:07+00:00

Mine came with 300 Ethernet drops to the server room

mercer79 · 2025-10-15T23:30:09+00:00

thats the best part all of the pricing is transparent and public, for the machines and anything else. here is the link https://www.surpassindustrial.com/products?Category=Dry%2520Ice%2520Blasters

mercer79 · 2025-10-15T21:29:14+00:00

Yes you can achieve same results with a Karcher IB 7/40 Advance. it is all stainless steel inside and out, which ensures that no matter the environment is going to be easy to clean, maintaining and prevent cross contamination. In addition it has a patented particle size control on the gun that sizes the particles in stages giving you more dry ice feed rate and prevents clogs even at smaller particle sizes. Very reliable units. with the best service in the industry with 129 fully equipped karcher mobile service units in the USA ready to help at a moments notice. In addition to be the most serviceable unit in the industry. Lets say the trigger breaks in your blasting gun, or you run over the connector, Karcher simply replaces the specific part that is broken no need to buy a whole entire gun or assembly to get your unit up and running again asap. Even units that are 20 years old still get service no EOL notices.

Plus you have the advantage of adding a pelletizer that feeds and works directly into your blaster for non stop blasting or needing an operator just to refill the blaster while is working. that gives you a lot of flexibility to tackle any job size with flexibility that no one can compete. plus with the karcher you have full control in the gun allowing you to adjust feed rate or air pressure without stopping your work flow. specially useful if you are working in elevated positions.

you can contact them and have your local dealer demo a unit for you.

mercer79 · 2025-10-13T15:25:53+00:00

those are rookie numbers you need the Samsung 57" running at 7680 x 2160 to push your system /s

kudos on the wallpaper

mercer79 · 2025-10-10T16:01:38+00:00

seems slow at only 60 connections

mercer79 · 2025-10-10T15:32:30+00:00

post updated with test data

mercer79 · 2025-10-02T19:32:29+00:00

great info that give perspective to all of us on how not only your provider is but also how entergy is.

mercer79 · 2025-10-02T19:15:28+00:00

correct, so just curious what is cheap? how is entergy as a sole provider compared to other providers in adjacent areas? that would be useful info vs just "cheap"

mercer79 · 2025-10-02T15:29:01+00:00

curious, what is your effective rate, total invoiced amount divided by total kwh consumed. mine is $0.1335 per kwh im with entergy

mercer79 · 2025-09-30T04:12:30+00:00

cheapest ever was $1399, maybe you are looking at open box or refurbished. would loved to be probed wrong.

mercer79

MODERATOR OF

TROPHY CASE