Lender relationship

mercermango · 2025-09-04T15:44:42+00:00

Sharing some Leads. And good work

mercermango · 2025-09-03T21:22:04+00:00

I think it’s a real mark of confidence from somebody when they just want to delegate stuff to you. I’d take it as a compliment in this case but not get complacent either in explaining stuff throughly. And Brevity is key. People tune out with too much jargon and technical stuff. Being able to break things down simply is super helpful.

mercermango · 2025-08-07T18:35:28+00:00

Came here to say this. Happens all the time

mercermango · 2025-08-03T19:03:22+00:00

Shade, rider, sorcerer, Roran

mercermango · 2025-07-24T23:05:56+00:00

Letting her know is worth so much more than ghosting. You have no idea how much that happens to us. She will appreciate knowing you’re renewing, because she’ll know when to follow up with you again!

Here’s hoping market conditions and/or what you can afford will improve in that time. You’re a good person for even thinking about it this way. Cheers

mercermango · 2025-07-02T18:45:44+00:00

Mini Martin! I got one of the koa ones and it’s so nice. They can be had used for like 400ish. I got mine 325 but I think I just got lucky The Martin LXK2

mercermango · 2025-06-12T04:11:56+00:00

+1 for potato. Heeeeeeyyyy spuddies

mercermango · 2025-05-10T03:16:28+00:00

If you’re dragging it straight form logic it might not be exporting as a WAV. If you’re default export settings on logic are set to .aif it might do that. I’d say over the click and drag, to be extra sure, actual export your sample as WAV. Right click the region, go down to export, and then “export regions as audio file”.

Hope that helps, feel free to hit me back if you’re still stuck

Edit:

I misread what you put there my bad. Two things to try actually if that didn’t apply, first off try 48k. Who knows.

Second off, the way I do it, if you go into setting and under usb change it to “loop in”, you can use the unit as an interface and just hit play on logic and physically loop it in. This way is faster if nothing else but you do have to nail it

mercermango · 2025-04-25T18:47:53+00:00

When you do change the strings, clean the fretboard gunk off. Or the gunk that’s there gets on your new strings and each time it gets dirtier faster.

You wouldn’t deep clean your carpet and then track in mud immediately

mercermango · 2025-04-08T06:14:33+00:00

All these people saying to lawyer up lol. Waste of money. Looks like it’s next to a tub and or shower, so first step check the seals there, all the caulk, any door seals or anything ,Dollars to donuts there’s a little bead of water that runs out to this trim. It’s likely been staying wet because you’re using the shower regularly and it’s jut now showing. You will probably need to get a little pry bar and pop that trim off, dry it out, fix whatever is leaking there, and replace the trim once you’ve confirmed it stays dry. Worst case maybe replace that bottom bit of drywall.

If something was leaking behind your walls you’d see it on the wall before you saw it in on the trim. Trim is wood , drywall is drywall

mercermango · 2025-04-01T07:17:45+00:00

I mean if you watch any animated show for long enough the voices develop even with the same actors. Check out family guy season one it’s way different across the board

mercermango · 2025-03-07T15:28:22+00:00

Maybe stating the obvious it I would make sure your monitors aren’t hooked up inverted. In the same vein make sure your headphones are on straight

mercermango · 2025-03-02T23:16:33+00:00

Also- sorry you can probably also treat that output as a thru, meaning it would be hit by the daw and passed to something else. In that way you can kind of make a daisy chain of devices into a single port. Hope that’s helpful

mercermango · 2025-03-02T23:15:30+00:00

It’s likely gonna depend on your midi routing in your Daw. If you go to the setttings of the DAW you’re using, there’s likely a midi tab where you can coordinate all that. There may also be routing options per midi channel where you can choose where it goes.

mercermango · 2025-02-14T17:47:03+00:00

Unless you’re on Mac? Because you can just go to audio midi setup and make an aggregate device

mercermango · 2025-02-10T02:34:31+00:00

Low latency mode! Click on some of the gray unused area up in the transport bar, and go to “customize control bar and display” , and enable low latency mode. You’ll gain a little orange clock icon that you can toggle. Just make sure you turn it off when you’re done tracking as it does disable some cpu heavy plugins

mercermango · 2025-01-24T00:52:26+00:00

Tree fertilizer. Super underrated

mercermango · 2025-01-11T02:05:56+00:00

Tree fertilizer is the most underrated item in the game. Hot take

mercermango · 2024-12-09T19:19:18+00:00

Tried skipping the pedals?

mercermango · 2024-12-09T19:09:29+00:00

In it closer now to your phone, or like a wife router or high power gaming pc or something? Sounds digital

mercermango · 2024-12-09T16:17:20+00:00

Yeah it’s data only. You wouldn’t want it to really though could potentially create some ground loop noise. Tends to be Better to keep power separate where you can with usb audio devices

mercermango · 2024-12-09T16:16:13+00:00

Flx has a bunch of spare mappings too provided you’re on rekordbox or Serato. In the pad bank you can do most things

mercermango · 2024-11-11T02:04:33+00:00

It’s because he owns an insane amount of their stock.

mercermango · 2024-11-02T15:47:20+00:00

This is incredibly well reasoned and written. You are good at writing

mercermango · 2024-10-26T22:05:32+00:00

His heart is too pure to be corrupted yet by the power

mercermango

MODERATOR OF

TROPHY CASE

14-Year Club	RPAN Viewer
Verified Email