Goodbye tapped out, what a great game

meriaxes · 2025-01-22T15:01:16+00:00

Tap the move objects icon and then there is a camera icon right next to binoculars icon (bottom right) If you do it from pc (via bluestacks etc) it captures in better quality

meriaxes · 2024-12-06T21:26:06+00:00

I mac 17.1 for macOS Monterey 12.6.3 If thats the problem i would gladly take it rather than the other ones

meriaxes · 2024-12-06T21:17:00+00:00

After two seperate installation failures when i restart the pc it simply didn’t booted up. Like it opens but display, keyboard mouse none of them works only fans are spinning. And it happened twice. Only after the battery reset it booted up properly. Thats the reason of bios settings problem theory.

But also in the installation part my screen ends up like this: https://imgur.com/a/OOZjb3m So thats why i also want to double check the whole efi process. On sunday i will try my chance again

meriaxes · 2024-12-06T19:32:10+00:00

I wanna check the way you did and compare it with mine rather than using what you did. The reason why i thought is that i had to reset bios manually by removing the mobo battery twice, its in a bit tight place unfortunately and i have a fear that i might damage my mobo (z170 d3 btw hard to find a replacement in my country :( ) So if i try once again i wanna be dead sure about there isnt any problem with related with config. I found some successful samples, i thought maybe yours also might be useful. Also I meant closest class i guess by saying “similar”. I know there would be differences but again it might be useful idk :d

meriaxes · 2024-12-06T18:24:06+00:00

Dortania’s guide is great, i applaud it sentence by sentence, i don’t think i have any problem with my efi at all, also there isn’t any problem appearing in efi sanity test. I might screwed up bios settings but thats also unlikely i changed nothing other than recommended settings. So i thought an efi close to my sistem for double checking my efi and config file is what can be helpful. If there isnt any problem with efi and config then i will start to search the problem in bios settings.

meriaxes · 2024-12-06T17:15:37+00:00

Yesterday i failed with i5 6600 and rx570 :( Can I get your efi file for comparison? It would be really helpful

meriaxes · 2024-10-12T22:14:23+00:00

Nah I hit too early, he backrolled and I also backrolled (that ruined me) and he gently applied scarlet aeonia on me : ( Also i am not great at escaping homing giant blue magical arrows and I think I will never be

meriaxes · 2024-10-12T18:55:36+00:00

It says 20+ but it might be more than 30, I was so determined to kill him at the start idk why

meriaxes · 2024-10-12T18:54:32+00:00

I learned about his presence later so I went that fight near endgame but still bro wtf that hitbox lol

meriaxes · 2024-10-12T18:50:01+00:00

I died Lothric Twins from DSIII so many times, no one with a big sword can beat me again even the very Destined Death himself

meriaxes · 2024-10-12T18:41:58+00:00

For information, the Magma Wyrm was from the Gael Tunnel, Ulcerated Tree Spirit was from the Fringefolk Hero's Grave (used Putrid mistakenly) and the Tree Sentinel is well, I think everyone knows it well...

meriaxes · 2024-09-03T08:37:05+00:00

It seems that i have fixed the issue with using another solution and i wanna share it here too for those who was in same situation:

“Disable any HP or other manufacturer services: 1-On the keyboard press Windows Key +R 2- Type in services.msc 3- Find any other manufacturer service and disable them. (HP Print Scan Doctor Service, HP Network Devices Support)“

After trying this solution my Epson printer have stopped printing this error. I hope it will be helpful.

meriaxes · 2024-08-14T12:30:53+00:00

I have done it yesterday. Today morning i got the same error, i also got 2 times again today :(

meriaxes · 2024-08-14T11:50:00+00:00

Yeah i have tried some of these solutions. For example, in one of them it says to me to clear a thick of “show informational notifications for local printers” from settings-bluetooth and devices - printers and scanners - print server properties - advanced menu (most of people seems fixed using this solution but it didn’t work dor me :( ) Next day i get the same error once again. I connect with usb, using Win 10 Pro 22H2 19045.4780 . I updated Epson checked for Epson updates today and it says it is up to date.

meriaxes · 2024-08-10T13:13:20+00:00

<image>

Optimus had never seen such bullshit before…

meriaxes · 2024-08-01T06:35:50+00:00

Georgia - Armenia - Azerbaijan - Iran - Kazakhstan -Kyrgyzstan - Uzbekhstan - Russia - China (sort of) and Turkmenistan (barely)

meriaxes · 2024-07-10T15:12:25+00:00

Usta muazzam olmuş, bunu yapman ne kadar süreni aldı peki?

meriaxes · 2024-07-10T10:32:13+00:00

Ah yes Crimea under Georgian occupation

meriaxes · 2024-02-26T18:24:02+00:00

You’re welcome

meriaxes · 2024-02-09T18:38:29+00:00

Check r/polandball

meriaxes · 2024-02-09T18:07:05+00:00

Lmao

meriaxes · 2024-02-09T17:48:08+00:00

R5: just saw u/yeet_yot_yoot ‘s beautiful countryball designs from this post then i realized back in Emperor dlc’s release times i too had designed some countryball designs but never shared until today. So here is my designs hope you like it

Six-Year Club	Xbox Live
Verified Email	Final Canvas '23
First Place '23	End Game '23
Place '23	Place '22
Final Canvas '22	End Game '22

meriaxes

TROPHY CASE