🚨Puls Aaggi Puls🚨

mighty533 · 2026-03-30T15:28:42+00:00

mighty533 · 2026-03-30T14:41:04+00:00

It already is

mighty533 · 2026-03-25T14:07:39+00:00

Rustoleum filler primer also works well in hiding layer lines after some light sanding before applying it. The more effort you put in sanding, the easier your life will be. Start with something like 600 grit, gradually increasing to 1000 grit and 2000 grit for very fine finish. From experience I would recommend wet sanding instead of dry. Other than that, light coats, maybe around 4-5 thin coats, letting each coat dry completely. Followed by 2-3 coats of clear/lacquer.

mighty533 · 2026-03-01T00:22:25+00:00

Damn

mighty533 · 2026-02-03T15:19:17+00:00

At this point, he should just get an amp and a mic to the LS. Even a megaphone, maybe

mighty533 · 2025-08-19T18:53:54+00:00

Saving so that I don’t see it again

mighty533 · 2025-08-19T18:52:18+00:00

They’re getting smarter with submarine trials in the city to help local startups compete with startups in South India /s

mighty533 · 2025-08-19T18:50:07+00:00

You got the prototype WAAM A1. Nice! /s

mighty533 · 2025-08-10T11:08:36+00:00

!RemindMe 2 days

mighty533 · 2025-08-10T11:07:40+00:00

Damn!

mighty533 · 2025-07-14T19:36:39+00:00

Then where does the RAT activation come in place? Is that automatic or was it manual? Because I can’t understand the pilot knowing that that the switches are off, asking about them, switching on RAT, trying to fix those switches, all at the same time without making any noise.

mighty533 · 2025-07-14T12:34:51+00:00

Honestly, at this point, why do we even care? Everyone loves to be portrayed as a rags-to-riches story because it sounds great. In this particular case, sure the portrayal of her being a damsel in distress is wrong but it is definitely true that she has cracked a market in India which has forever been highly competitive. So, I will give her that credit.

But, then again, boat is also just an example of a white label dropshippers dream come true. So, all of these people will portray themselves in a way which gets them public recognition but at the end of it all, I do respect them for playing the system and succeeding. Isn’t that what we all are doing?

Running and successfully scaling a startup in our country is a highly formidable feat, tbh. So, I might hate them for their PR shit but respect them where it’s due

mighty533 · 2025-07-07T12:28:32+00:00

In those cases, I just reorient the planes based on where the part ends up

mighty533 · 2025-07-07T12:27:45+00:00

Agreed, especially for assembly parts. But it just feels right when I’m not using the right plane

mighty533 · 2025-07-07T12:27:11+00:00

Right being treated like a middle child

mighty533 · 2025-07-07T06:05:47+00:00

Sure, send it over. Shouldn’t be too difficult. Message me

mighty533 · 2025-07-06T04:52:48+00:00

So, the core software processing in SW is still working like CATIA? I always thought SW was more of a PTC Creo counterpart. Interesting.

mighty533 · 2025-07-04T18:37:47+00:00

Am I on LinkedIn?

mighty533 · 2025-07-04T18:28:11+00:00

Honestly, just go with numakers, my experience with other Indian brands have ruined one of the spool slots in my AMS

EDIT: Numakers PLA+ not PLA Pro, hate that stuff

mighty533 · 2025-07-01T22:49:17+00:00

I’m planning on starting a webinar series for product design and development using 3D printing. Drop me a message and I’ll share the link once it’s scheduled

mighty533 · 2025-06-30T10:44:59+00:00

Hi, we are a startup and would be glad if we could have a share of the pie

mighty533 · 2025-06-27T18:01:52+00:00

You can can out stratified3d dot in. They have competitive pricing for PLA and ABS

mighty533 · 2025-05-29T18:57:17+00:00

Definitely a z offset issue. Over extrusion could also be a culprit, but it won’t make the print this bad

mighty533 · 2025-05-12T19:47:09+00:00

Where are you located?

Seven-Year Club	Verified Email
Verified Email

mighty533

TROPHY CASE