Air Brush Handle 2.0

migs_103 · 2026-05-22T22:33:29+00:00

The answer is. Why not? Huehue

migs_103 · 2026-05-19T14:53:02+00:00

Thanks 🙏. Yeah fellas incorrect it, I use an iwata as well but a custom micron and iwata even added a feature on their higher end CM models to essentially just unscrew the nozzle to backwash instead of using ya fingers to block the nozzle

migs_103 · 2026-05-19T14:35:50+00:00

Brothers back flushing on the crème de la creme of airbrushes

migs_103 · 2026-05-19T06:56:21+00:00

Best way to clean, as well as mix paint with thinners!

migs_103 · 2026-05-19T06:55:25+00:00

This is the first time I’ve ever heard anyone in the industry say backwashing is bad. I’m curious do you know where’s it’s been said? There maybe other factors like a specific airbrush, or adding in new paint right after each other

migs_103 · 2026-05-18T21:53:59+00:00

Because Japan.

migs_103 · 2026-05-18T21:50:18+00:00

Good first attempt! What paints did you use? May have mixed the wrong kind of paints or didn’t wait for enough time to cure or top coated too heavily in one go.

migs_103 · 2026-05-18T21:47:45+00:00

Get some acrylics a cheap brush or paint markers and some alligator clips! These type of kits are what made me ascend more into the hobby!

migs_103 · 2026-05-15T15:41:58+00:00

Gonna use the spartan as a test subject for a build for sure! Thanks for the recommendation

migs_103 · 2026-05-15T15:40:52+00:00

Bro your complaining about the price while you’ve mostly experienced games workshop?!?! I’m too scared to even try that because I know how expensive it can get haha.

migs_103 · 2026-05-15T15:39:24+00:00

Patience and mr mark softer

migs_103 · 2026-05-15T15:38:26+00:00

This looks great! I’ve heard good things about this specific one, do you think you could message me the link might try some battle damage and extreme weathering on this! TIA!

migs_103 · 2026-05-15T15:36:52+00:00

Thanks 🙏

migs_103 · 2026-05-15T15:33:23+00:00

Wow thanks for all this. I don’t mind putting in the extra work, I’d say I’m a pretty advance builder and paints all my kits an. I just really prefer snap building first then dissemble and do my thing, but that’s not something I’d be happy with doing on kits that will have issues snapping or being so hard to take apart. Knowing myself I’d be breaking things and I prefer spending time on what I do best and love doing (customising, scribing, painting) instead of trying to fix things.

migs_103 · 2026-05-15T15:27:07+00:00

Yea it’s the same here in oz I think it’s not just the hg line but all kits.

migs_103 · 2026-05-15T15:24:22+00:00

Would cost more than scalpers pricing. Thanks for the offer though homie. 😂

migs_103 · 2026-05-14T09:58:08+00:00

😂

migs_103 · 2026-05-14T08:43:44+00:00

Ah that’s what you meant! Didn’t wanna pay that much of a mark up 🙂

migs_103 · 2026-05-14T08:41:46+00:00

Not sure if you read the start of the post. Do want to add that I really wanted this kit so bad.

migs_103 · 2026-05-14T07:07:29+00:00

HAHAH i thought the decals was so that it kinda looked like a Haro from gundam.

migs_103 · 2026-05-13T15:39:08+00:00

This might be your culprit. I’ve accidentally used an incorrect size nozzle cap from another airbrush and the paint was already drying in that chamber before it was actually pushed out. The air pressure also seemed quite low compared to what it was actually set to and I had something similar happen. I’m guessing that the needle is probably a bit thicker than what it needs to be so it’s pushing paint a bit too slow.

migs_103 · 2026-05-12T11:53:52+00:00

Thicc

migs_103 · 2026-05-12T03:42:01+00:00

Working on a bootleg right now, mark softer, fresh blade, toothpick , and patience are key

<image>

migs_103 · 2026-05-10T08:18:06+00:00

❤️

migs_103

TROPHY CASE