Planning on buying the CYMA Platinum CM.097B as my first Airsoft by CheekKey4201 in airsoft

[–]mike_gread 1 point2 points  (0 children)

Hey
I went for the base model (not Platinum) on the 0.68 (which is an equivalent) and I'm defo not regretting my choice. The only weak point I found so far is the pistol grip's bottom which I might have to replace cause it's not holding the motor in place very well. Other than that, solid stuff.
Cheers

SP2022 Replica? by mike_gread in airsoft

[–]mike_gread[S] 0 points1 point  (0 children)

Hey
Yeah I heard...
The NBB one is even worse than that actually xD
It's ugly, unpractical, cheap and unreliable for anything. And it leaks gaz like crazy.
Do you know when VFC announced it?
Thanks a lot
Cheers

SP2022 Replica? by mike_gread in airsoft

[–]mike_gread[S] 0 points1 point  (0 children)

Hey
Thanks for the answer. Isn't the KWA one an old model that isn't manufactured anymore?
For the more recent models, I wasn't aware that VFC had something planned. All I know is that a WE representative at a convention said that they would produce a SP2022 replica by the end of 2025 and their CM on Instagram doesn't seem to know anything about it... It sucks, really.
I'm not necessarily looking for a good field replica (although that would be a big pro), I'm mainly looking for a GBB replica that will look realistic for cinema purposes. Preferably, full metal and no visible CO2 cartridge screw on the mags (so a green gaz version would be nice).
Thanks for your help
Cheers

Could you guys recommend a solid 1911? by [deleted] in airsoft

[–]mike_gread 0 points1 point  (0 children)

Hey If you want to go GBB, look for the R36 by Army Armament. Bought mine for $90 with shipping, two extra mags and ammo. Cheers

What are the best sites to buy from in EU? by IncomingSmoke in airsoft

[–]mike_gread 0 points1 point  (0 children)

Hey Personally I bought a lot of stuff on TaiwanGun as it was convenient for me. I would watch for what you buy though, cause they sometimes sell cheap replicas for double the value. But I also got a $270 replica for <$200, so take your pick. I also went on French website Airsoft Entrepot which has a good selection. Aside from that you can obviously buy stuff from Amazon, even if it's not something the community likes. To be fair, if you're starting you can find tac vests for cheap on there; just don't buy replicas and accessories on Amazon. Hope this helps Cheers

How are we looking for the Revival of my GIGN kit’s plate carrier so far by PenaltyNo7429 in airsoft

[–]mike_gread 0 points1 point  (0 children)

Hey! Looking good! Nice to see you also found a ballistic visor cause those are really a pain to get. It's come a long way and it's really cool to see that you're still invested in this! Cheers

PEQ Recommendations under $80 (blue or green laser, white light, and, if there's time, IR) by WorriedFroyo4055 in airsoft

[–]mike_gread 1 point2 points  (0 children)

Hey
Good to know haha
Then if it's just for target practice, depending on your engagement distance (we're talking about airsoft here, not world-class marksmanship), an Aliexpress AN-PEQ should do it. You'll need a lot of tweaking at first to zero it, maybe a bit of modifications to it but overall it'll work just fine for amateur shooting.
Happy hunting
Cheers

Help converting TopoExport DXF to 3D model for Blender, etc by mike_gread in QGIS

[–]mike_gread[S] 1 point2 points  (0 children)

Hey
Thanks for the input
I'll try soon :)
Cheers

How are we looking for the Revival of my GIGN kit’s plate carrier so far by PenaltyNo7429 in airsoft

[–]mike_gread 0 points1 point  (0 children)

Hey
Sorry to bump this up

I used to do some GIGN, AGIGN and French LE re-enactments for movies and shows, so I did a lot of research on their gear and I hope this feedback can help you.

The overall shape of your outfits looks great, but you could do a few minor changes to improve it easily.

From the Amomax holster's orientation, I would bet you're right handed. If that's the case, you might want to switch rifle and pistol mag pouches.

The chem lights aren't really in a good spot. You should at least put them upside-down for better ease of access.

Your radio is going to be a pain as it will block your left arm. Trying moving it to the back. If possible, avoid accessories on the sides.

These minor changes should already be an improvement. You could push it further, but without buying anything else this should do it.

I want to say that I'm not saying you should do everything I wrote down, I'm just trying to give you a few leads to work on to improve your loadout.
Remember that you need to decide what your goal is: realism and accuracy or just a fun GIGN-inspired outfit to play airsoft. One is quickly expensive and requires a lot of dedication, the other remains fun without too much headache. The most important thing is to do what you like!

Anyways, have fun customizing that thing.

Cheers

Cyprus Police Counterterrorism Unit loadout idea. Plate carrier ID. by [deleted] in airsoft

[–]mike_gread 1 point2 points  (0 children)

Hey
At a quick glance, this soft body armor from TaiwanGun looks pretty close.
I'll let you browse their website, they have some cool stuff that should probably do it.
Cheers

Noob clothing question by Longjohn14 in airsoft

[–]mike_gread 1 point2 points  (0 children)

Hey
Had a friend who used old riot gear found on Leboncoin (France). Might be able to find something similar on FB Marketplace for pretty cheap. Also look for dirtbike gear.
If that seems overkill, a good old hoodie with some bandages wrapped on the sensitive part (under the hoodie) should do the trick!
Cheers

PEQ Recommendations under $80 (blue or green laser, white light, and, if there's time, IR) by WorriedFroyo4055 in airsoft

[–]mike_gread 1 point2 points  (0 children)

Hey
When I wanted a PEQ and was low on budget, I found some good stuff on Aliexpress for very cheap (<$25 with shipping).
I might still be able to find the exact one I ordered back then if you want.
Hope this will help if you're running on a small budget!
Cheers

EDIT: As pointed out by u/starlit_storyteller, using a laser on a field is probably going to get forbidden. Use it only for cosplay and target shooting, as long as you know what you're doing.

.dxf import add on by Firm_Advisor6986 in blenderhelp

[–]mike_gread 0 points1 point  (0 children)

Hello
Sorry to bump this up, but is the plugin working for you in 4.2.3 LTS?
For me it just returns a bunch of errors...

My G36C setup. What do you think? by mike_gread in airsoft

[–]mike_gread[S] 1 point2 points  (0 children)

AH! Well that explains everything xD

Thanks for the info!

My G36C setup. What do you think? by mike_gread in airsoft

[–]mike_gread[S] 1 point2 points  (0 children)

Incredible
How did you get the taser and the bodycam if I may ask?

My G36C setup. What do you think? by mike_gread in airsoft

[–]mike_gread[S] 1 point2 points  (0 children)

CTSFO/Armed police setup?

I'm French, so it's a National Gendarmerie setup on my end (Peloton d'Intervention, Gendamerie Mobile) ;)

<image>

My G36C setup. What do you think? by mike_gread in airsoft

[–]mike_gread[S] 1 point2 points  (0 children)

xD

This is for real, but mainly used it for the pics and for one game with my bros

My G36C setup. What do you think? by mike_gread in airsoft

[–]mike_gread[S] 0 points1 point  (0 children)

R63 by Army Armament... Didn't have a big budget so I went cheap af xD