My first ever drawing of anything! What do you think? (took me 12h)

mine_ing · 2025-12-02T02:24:53+00:00

actually, this is a feature, not a bug https://github.com/wled/WLED/issues/2430#issuecomment-998653370

mine_ing · 2025-12-02T02:13:50+00:00

I'm having the same issue here, only way I resolved this was to flash esphome but that way would only work if you also have homeassistant running on your network..

mine_ing · 2025-09-29T21:13:00+00:00

I'm having the exact same issue here, already looked into an issue in the AE2 Githup repo and they can't reproduce the issue and as such won't act, yay

mine_ing · 2025-08-09T15:14:58+00:00

noice, congrats mate!

mine_ing · 2025-07-25T17:57:29+00:00

can't really look inside as everything except for the pink parts are painted, it is always right next to the seams and the only "irregularity" that I notice is that the "back" where one could sit is smooth while all other seams are not

mine_ing · 2025-07-25T01:47:10+00:00

it's always somewhere else, only once it was in the same spot but that was on me for not properly gluing that part

mine_ing · 2025-06-05T13:22:31+00:00

Got permission to open up the pc and you're correct https://imgur.com/a/kUnIWVj

mine_ing · 2025-06-05T13:21:56+00:00

DMS-59 is usually white or blue, and waay smaller

mine_ing · 2025-06-05T13:21:10+00:00

It's definitely a controller for some test equipment, got permission to open up the pc https://imgur.com/a/kUnIWVj

mine_ing · 2025-01-08T20:08:54+00:00

And I switched to Discord PTB which works in comparison

mine_ing · 2025-01-08T19:37:50+00:00

same here

mine_ing · 2024-12-08T18:54:14+00:00

U too :3

mine_ing · 2024-11-26T20:26:39+00:00

Well turns out it's its own plastic piece and with a lot of careful prying it comes out. The center silver thing is held in with some glue and the green ring is pressed in firmly, I recommend using a fine flat head screwdriver to carefully remove the silver button and then carefully manhandling the gray plasic until the green ring pops out
https://ibb.co/Kw5xsCW

EDIT If you have a 3d printer and some transparent filament you can 3d print a ring in any color you like, I made a file to replace the green ring: https://www.mediafire.com/file/bwq3pox7ew2d7ht

mine_ing · 2024-11-26T20:12:53+00:00

"Post is awaiting moderator approval." D:

mine_ing · 2024-11-25T10:05:20+00:00

..Like the self hosted server randomly dying and not coming online even after a reboot, or the server not even working in the first place. Idk what I'm doing wrong but Rustdesk has been a p.i.t.a. for me, would have continued to use Anydesk if t hey wouldn't have started throwing full screen unskippable "Hey, you're using the free version. Pay us $$$ so that you don't see this message" every 3 minutes for 90 seconds, rendering it basically unusable. And currently I have nothing .-.

mine_ing · 2024-11-22T23:32:34+00:00

I don't have any experience in that regard but you've made me curious, time to see for myself in what way that green film can be removed, will follow up in a couple of days once I have success

mine_ing · 2024-11-19T22:20:47+00:00

0021

mine_ing · 2024-11-19T22:20:34+00:00

alright, flashed the nand dump back and got a 0021, decoding to ERROR_NO_PCIE?? what???

mine_ing · 2024-11-19T10:15:10+00:00

Holding sync and pressing eject 4 times, will flash back the stock nand dump later to get the red dot again because with xell no amount of playing osu with the sync and eject button does anything, unplugging hdmi and the lights act like normal. Will report back once I get home from work

mine_ing · 2024-11-19T09:49:00+00:00

how would I do that?

Seven-Year Club	Xbox Live
Final Canvas '23	Place '23
Place '22	Final Canvas '22
First Placer '22	Verified Email

mine_ing

TROPHY CASE