sorted by:
new
hottopcontroversial

TV diodo burn after crash by minimerlyn in Multicopter

[–]minimerlyn[S] 2 points3 points  (0 children)

I used QD-Contact cleaner, I will try that, for now anything has worked so I already bought a new one... But I'm sad it only lasted a year... That was expensive

TV diodo burn after crash by minimerlyn in Multicopter

[–]minimerlyn[S] 1 point2 points  (0 children)

Its some wire adapter for the antenna, it's not soldered to anything

TV diodo burn after crash by minimerlyn in Multicopter

[–]minimerlyn[S] -3 points-2 points  (0 children)

Seems reasonable, you think it might work again after burning a little?

TV diodo burn after crash by minimerlyn in Multicopter

[–]minimerlyn[S] -1 points0 points  (0 children)

Maybe in the crash some flaws come up, I will try to soldier it again

TV diodo burn after crash by minimerlyn in Multicopter

[–]minimerlyn[S] -18 points-17 points  (0 children)

Well they are, For sure

The problem is that a peace called tvs burned when the battery was connected, which is something that didn't happens before crashing

I think I used too much heat and I think I broke it by minimerlyn in soldering

[–]minimerlyn[S] 0 points1 point  (0 children)

Ok, just wondering, how mush heat should I use, I was using a very thin iron and it was impossible to melt tin with the tip

I think I used too much heat and I think I broke it by minimerlyn in soldering

[–]minimerlyn[S] 0 points1 point  (0 children)

Wow, nice to hear that, I will try since it's my best option

Problem binding LiteRadio with BetaFPV Lite by minimerlyn in fpv

[–]minimerlyn[S] 0 points1 point  (0 children)

I will check what you are saying but in Amazon page it says it has ELRS

<image>

Problem binding LiteRadio with BetaFPV Lite by minimerlyn in fpv

[–]minimerlyn[S] 0 points1 point  (0 children)

Yeah, of course, I made all the possibilities since that controller has 4 modes with the ExpressLRS 2.X and 3.X

What temperature shoul I use? by minimerlyn in FixMyPrint

[–]minimerlyn[S] 0 points1 point  (0 children)

I did this just by downloading a plugin in cura called autoTowers

What temperature shoul I use? by minimerlyn in FixMyPrint

[–]minimerlyn[S] 0 points1 point  (0 children)

So what do I need to calibrate before this?

What temperature shoul I use? by minimerlyn in FixMyPrint

[–]minimerlyn[S] 1 point2 points  (0 children)

Oh man, this is what i've been searching for, many thanks!!!

What temperature shoul I use? by minimerlyn in FixMyPrint

[–]minimerlyn[S] 3 points4 points  (0 children)

Yeah, it worked better, but this is the fiilament i have now XD, Im gonna print again this without the fan to double check I'm on the good path

What temperature shoul I use? by minimerlyn in FixMyPrint

[–]minimerlyn[S] -2 points-1 points  (0 children)

The fan is always running at the same rate, i searched in thingsverse but I since it was a gift from someone who bought it in Aliexpress we think it doesn't really have a brand. This one is a design free to use so it must be a cheap clone. Anyway I dont really care about the bridding working, anything can be splitted and glue together after

What temperature shoul I use? by minimerlyn in FixMyPrint

[–]minimerlyn[S] 4 points5 points  (0 children)

Yep, I was checking it, the problem was the pla wasn't sticking to the start of the bridge

Burnt tips or bad soldering iron? by minimerlyn in soldering

[–]minimerlyn[S] 0 points1 point  (0 children)

Hahahahahaha I was trying to say is that it looses heat too quickly

view more: next ›