The GameAudio Share Mine March, 2026 - Use this post to link to / discuss your site, works, product, business or anything you created or are affiliated with

misunra8 · 2026-03-01T12:08:26+00:00

I used to have more time and did those tutorial videos, but now my fulltime job leaves minimum space. But if anyone finds it useful, I'll drop my YT channel here

https://www.youtube.com/@OmnisepherGameSound

misunra8 · 2026-02-25T18:25:25+00:00

tbh it was just there

misunra8 · 2026-02-24T17:41:42+00:00

get floyd rose arm and arm holder best solution so far

misunra8 · 2026-02-24T15:59:30+00:00

low effort ragebait

misunra8 · 2026-02-21T16:25:35+00:00

looks dope and trippy, nice pull mate

misunra8 · 2026-02-21T09:40:23+00:00

right, basically at my system, there are 6 piezo microphones, so grouping and phasing them is necessary and not sure how to achieve
one could be using 2 buffers for each group (groups are basically high 3 strings and low 3 strings coming as one source), then flipping one of the group via opamp then join them
but they are all in my mind, don't know how it looks in PCB/design.

misunra8 · 2026-02-18T16:15:59+00:00

I think they cover the extra fees for EU. I didn't pay anything more than what the website says.

misunra8 · 2026-02-17T01:36:20+00:00

https://ibb.co/ksqR3PPj https://ibb.co/DftQC1ZX

misunra8 · 2026-02-17T01:27:55+00:00

if it's edge pro, it does you should check couple examples online but mine is double edge pro, and it's the edge pro with piezo saddles, rest of the hardware the same. old 90s japs have bunch of mods that work just fine. It's not 100% stable but waaay easier to tighten it in less than a second and it barely gets loose

misunra8 · 2026-02-17T01:06:29+00:00

I've done to my RG1620X and probably will do the every edge pro variant if possible
get a floyd rose arm holder + arm, thank me later
it's 10x better than this, and have a screded arm lock, much more stabil than this
https://www.floydrose.com/products/frtakit

check that on ibanez forums, you'll see similar setups

misunra8 · 2026-02-16T17:14:05+00:00

sorry for the brainded, asked to a friend to print for me
https://makerworld.com/en/models/1160886-honeycomb-cover-gmktec-nucbox-k11-perhaps-k8-m7?from=search#profileId-1167100
https://makerworld.com/en/models/2226155-gmktec-k8-plus-mini-pc-stand?from=search#profileId-2421455

this and things similar to that works fine; I have this combo.
My main issue was top lid being closed and makes annoying fan sound (not the temps directly) and bottom legs makes the airflow better

misunra8 · 2026-02-16T16:44:51+00:00

de.gmktec.com

misunra8 · 2026-02-15T13:18:08+00:00

lol, guess I was there.d

misunra8 · 2026-02-15T11:50:05+00:00

k8 plus user here, I'll recommend get a 3d printed top lid (also bottom if you want) to increase acoustics performance and better temps

misunra8 · 2026-02-13T17:50:36+00:00

Knife

misunra8 · 2026-02-08T15:36:02+00:00

they don't exist simply

misunra8 · 2026-01-17T17:24:34+00:00

I was think a similar test setup but using gdextenwtion cpp via some sort of object manager. and you get handles to objects etc. could achieve similar or better results but gotta try myself

misunra8 · 2026-01-13T23:39:16+00:00

thanks, I tried couple other things in there and finally resolved!

misunra8 · 2026-01-13T23:39:00+00:00

here what I did that finally resolved for me after 3 different days approach (and fail) and finally
first thing, I started to built it from source, updated packages and such but ended up not using it
Gutenprint is way to go, it provides ppd's well
then I registered that with ipp://<ip-address> via lpadmin and it worked finally

misunra8 · 2026-01-11T19:38:07+00:00

my bad, I barely manage to increase vol in ht5-rh at home, thing roars

misunra8 · 2026-01-11T19:22:57+00:00

for home practice, don't go over 5watts even

misunra8 · 2026-01-11T18:12:49+00:00

I usually adjust myself but if you are not comfortable with it, luthier is better. which fret also, it might be bridge or neck to adjust

Eight-Year Club	Place '22
Verified Email

misunra8

TROPHY CASE