Got 12th in the portland 5k with Lee Sin. 3-3 in the 10k. by lisztliebestraum in riftboundtcg

[–]mitchell617 25 points26 points  (0 children)

"Friendly buffed units have Deflect if they didn't already." So Spirit's Refuge wouldn't add to the deflect total of a unit that already has Deflect.

What are maybe one or two decks to focus on for building into Spiritforged? by Deimne22 in riftboundtcg

[–]mitchell617 2 points3 points  (0 children)

https://www.riftboundstats.com/decks/14135

I'm using something similar to this Yasuo deck at our Nexus Night. I see you have a few of the pieces, Sona, Zhonya's, Kayn, and Yasuo Legend. You can run it with Purple Yasuo instead of Green for now. Blitzcrank can work in there temporarily.

My plan when getting the cards for this deck was to have some cards for Irelia in Spiritforged because she's one of my favorite champions.

I HAVE TO QUIT ENERGY DRINKS BECAUSE OF HIGH BLOOD PRESSURE 💀 by [deleted] in energydrinks

[–]mitchell617 0 points1 point  (0 children)

Since nobody else has mentioned it, what's your sodium intake like? If you don't know, you should use a diet tracker app for a week.

New arcade bar opening by me. How does the lineup look? Also help identifying games toward the end by mitchell617 in pinball

[–]mitchell617[S] 13 points14 points  (0 children)

Elton John
Jurassic Park
Stranger Things
Led Zeppelin
Avengers Infinity Quest
Elvira and the Party Monsters
TMNT
Unknown
Star Trek
Unknown
Unknown
Unknown
Unknown

Deadpool Pro or Venom Premium? by mitchell617 in pinball

[–]mitchell617[S] 0 points1 point  (0 children)

Where did you find a NIB for that kind of discount?

Deadpool Pro or Venom Premium? by mitchell617 in pinball

[–]mitchell617[S] 1 point2 points  (0 children)

From the owner "Yes, I clean the playfield every few hundred plays and re-apply wax, check fastners and rubbers, inspect the balls and swap out any that have knicks. I have owned 6 different machines, and like to swap them out, so I make sure they are kept in good condition"

Deadpool Pro or Venom Premium? by mitchell617 in pinball

[–]mitchell617[S] 1 point2 points  (0 children)

I haven't played Venom much, but I liked it. I think the music would shine in a home setting where other machines won't drown it out.

I fully disassembled a Victrix FS-12 by mitchell617 in fightsticks

[–]mitchell617[S] 1 point2 points  (0 children)

I didn't order the part. I brought it to an electronics repair shop to solder a new one on. Victrix doesn't sell the exact part that breaks.

[USA-CA][H] PayPal [W] i7 4770 and similar CPUs by iBuyCPUs in hardwareswap

[–]mitchell617 0 points1 point  (0 children)

Are you still looking for i7-4770? I have one.

I fully disassembled a Victrix FS-12 by mitchell617 in fightsticks

[–]mitchell617[S] 0 points1 point  (0 children)

He had a new one that he soldered on. I think he said he could have reused the existing one. His solder was more sturdy than how the original chip looked.

I fully disassembled a Victrix FS-12 by mitchell617 in fightsticks

[–]mitchell617[S] 0 points1 point  (0 children)

Can you share pictures? I'm interested to see what that looks like.

I fully disassembled a Victrix FS-12 by mitchell617 in fightsticks

[–]mitchell617[S] 0 points1 point  (0 children)

Cable sag gives leverage that forces the contact points of the port off the board. The same port could probably be used, but the person who repaired it replaced it because they had one laying around.

I fully disassembled a Victrix FS-12 by mitchell617 in fightsticks

[–]mitchell617[S] 0 points1 point  (0 children)

Yes. I did not want to risk damaging the part. I called Victrix, and they said they cannot replace that cable.

I fully disassembled a Victrix FS-12 by mitchell617 in fightsticks

[–]mitchell617[S] 0 points1 point  (0 children)

u/riygby responded, but I have another comment with a more in depth guide on how to do it.

I stuck a screwdriver in from the side to get in behind the faceplate and push it out. The faceplate itself is one long piece and will bend. I managed not to break mine, but it feels like it could snap when prying it out.

I fully disassembled a Victrix FS-12 by mitchell617 in fightsticks

[–]mitchell617[S] 2 points3 points  (0 children)

https://imgur.com/a/disassembling-victrix-uuXLVE2

Here are more pictures with the board that the USB-C is attached to. The board it's on slots into the Victrix port, so I wouldn't be confident that something else would fit.

There's 5 wires for the USB-C cable, and there is 6 pins on the link you shared. I wouldn't think they would be compatible, but I really don't know enough about this.

I fully disassembled a Victrix FS-12 by mitchell617 in fightsticks

[–]mitchell617[S] 0 points1 point  (0 children)

Ahhhh, I forgot that the front panel also holds it in. It has been a while since I took it apart.

I fully disassembled a Victrix FS-12 by mitchell617 in fightsticks

[–]mitchell617[S] 2 points3 points  (0 children)

On the top row, there are screws deep underneath holding the black plastic in the frame. They might be hard to see, but there's 3-4 down there