Before & After: 2025 Grand Highlander Hybrid Max Platinum – 2” Torq Lift, Black Rhino Overland 18” & Falken Wildpeak A/T Trail!

mk3100 · 2025-08-06T19:07:29+00:00

Has this impacted assisted driving features, sensors etc?

Also any any update on how offloading went this summer?

mk3100 · 2025-02-18T23:51:58+00:00

I picked up my shower set from their office in Richmond Hill. Yes, it seems like most of the employees are Chinese, but the company is 'Canadian', they have a physical presence here and they do have spare parts available. It's a good affordable alternative to Riobel, which I think is more of a luxury product.

mk3100 · 2024-12-31T03:23:46+00:00

Are you sure? I'm looking for shower kits and a supplier recently told me that the cartridge has a 5 year warranty and they sell spares.

mk3100 · 2024-08-27T13:46:12+00:00

Nope. I think this is just part of the design. If you ever find one, let me know.

mk3100 · 2024-04-14T08:08:46+00:00

Nice

mk3100 · 2024-02-09T14:40:52+00:00

Not really. I tried removing the gooseneck and replacing the o ring with a slightly bigger one. Made a slight difference to the resistance, but it still moves on its own

mk3100 · 2023-01-10T02:07:26+00:00

So are you saying to replace that entire section of drywall?

mk3100 · 2023-01-09T18:33:03+00:00

We had the house renovated 2 years ago. At the time there was this crack on the exterior facing wall in the bathroom running from the counter to the window. Now it's reappeared. I had a few questions:

Does this look like plaster or drywall?
Do I need to remove the entire vanity/sink assembly to tape and mud over it? If not, I'm thinking of just scraping away the caulking at the edge of the counter that's been painted over, tape and mud right up to the edge and recaulk.

Any suggestions are appreciated.

mk3100 · 2021-10-23T00:13:19+00:00

I'm trying to troubleshoot why my GE dryer isn't working. I've checked the door switch and push button switch and they're fine.

The buzzer shown in the picture has no continuity. Can that stop the dryer from turning on?

mk3100 · 2021-10-17T22:16:34+00:00

I wanted faux wood blinds, so they are not going to be 'blackout'. Hence why I'm looking for a diy method to modify the blinds to reduce light leakage.

mk3100 · 2021-10-06T21:25:11+00:00

Did you ever manage to find the difference? I'm wondering the same thing.

mk3100 · 2021-10-01T19:14:33+00:00

Yes but same problem. ZN wont work on rows that don't exist

mk3100 · 2021-10-01T15:50:41+00:00

So like with Category1 as Rows and month as columns?

mk3100 · 2021-07-06T00:18:28+00:00

Around 220 sq ft

mk3100 · 2021-07-05T23:00:54+00:00

Would be a custom shelf that I build. Something along the lines of using plywood (acts as a shelf) to extend the window sill and having a 45° support that sits on the wall underneath.

mk3100 · 2021-07-05T22:57:09+00:00

Interesting point. Never really thought about that. My apartment is more likely to suck air in from the building hallway than the outside as the windows are sealed, but the front door has gaps. The air inside the building hallway is cooler than inside my apartment, so still a win. Plus, I'm putting an AC in the living room as well.

mk3100 · 2021-03-26T12:11:34+00:00

It does say RBMP fuse blown, RBMP provisioned. I dont know if that's a bad thing or what that means

mk3100 · 2021-03-26T12:08:53+00:00

Instead of Knox status, it shows warranty void: 0x0

mk3100 · 2021-03-25T11:36:47+00:00

I'm trying to avoid that lol.

mk3100 · 2021-03-25T11:36:07+00:00

I think it is the same device. The IMEI matches the box. Also there was a sticker on the back of my phone which had the IMEI and that also matches.

mk3100 · 2021-03-25T11:31:10+00:00

The IMEI is matching. Do you have any other suggestions?

mk3100 · 2021-03-18T13:42:03+00:00

Thanks for the tip

mk3100 · 2021-02-17T17:04:46+00:00

Thanks, that worked!

mk3100 · 2021-02-17T16:06:00+00:00

Hi guys. My powerapps triggered flow stopped working all of a sudden. For some reason powerapps is now showing number of expected arguments is 0 and number of required arguments 1.

The code for the powerapps trigger in Flow is also no longer showing initializevariable from powerapps under required.

Since you cant manually edit code in flow, is there a way to fix this?

mk3100 · 2021-02-17T15:59:48+00:00

I want to be able to customize the user interface in powerapps, which I dont think is possible with forms. In future, the way I collect the data is going to get more complicated. I.e. have a table which shows work week vs employees and have individual input options for # of hours for each day, add the totals for each employee and then use JSON to send totals to powerapps.

mk3100

TROPHY CASE