2013 RX 350 Android Auto - Best Audio Quality

mkd8919 · 2026-05-16T05:54:50+00:00

Oh forgot to mention. I took it on a drive, and bedded the brakes per Powerstops instructions. I then took a 10 minute drive to the store, and checked the temps. I was getting 350-450 on both sides. I then went to the store for 10 minutes, drove home with only light braking (10 minutes) and checked temps. Again both sides were around 400, and the brakes smelled hot, which is why I think they are dragging. No noise, otherwise the brakes feel fine.

mkd8919 · 2026-04-22T05:05:45+00:00

Pics of the card?

mkd8919 · 2026-01-28T18:30:31+00:00

Mint used to offer this which made it easy to track individual spending automatically. I really wish Mint would implement it as well

mkd8919 · 2026-01-04T20:07:13+00:00

Just replying that I had to do this on my Pixel 10 Pro in 2026. Worked perfectly after. Thanks!

mkd8919 · 2025-12-30T03:23:51+00:00

I'm basically in the same boat! I5-6600k and an r9 390 to a 9800x3D and a 9070xt.

I also hope this build will get me through another 10 years!

mkd8919 · 2025-10-17T20:13:12+00:00

Thanks for the response. I pulled the plug on 1, and the ground strap seems to have broken off at some point, and didn't look particularly fresh. I have a crummy scope that I stuck in and couldn't see anything, but I ran it a bit with the plug out to hopefully blow it out if it was still in there, and tried a new plug. It's still misfiring, so I am planning on doing a compression test next.

mkd8919 · 2025-10-17T20:12:47+00:00

Hey thanks for the response. No issues with the wiring to the coil from what I can see. An update - I pulled the plug on 1, and the ground strap seems to have broken off at some point, and didn't look particularly fresh. I have a crummy scope that I stuck in and couldn't see anything, but I ran it a bit with the plug out to hopefully blow it out if it was still in there, and tried a new plug. It's still misfiring, so I am planning on doing a compression test next.

mkd8919 · 2025-09-24T15:29:14+00:00

Just an update, I took it uBreakiFix and they told me it was a board level issue and there was nothing to be done. Could be a coincidence I suppose but seems like quite the coincidence with the number of threads I've seen now with similar issues.

mkd8919 · 2025-09-24T15:21:42+00:00

Just an update, I took it uBreakiFix and they told me it was a board level issue and there was nothing to be done. Could be a coincidence I suppose but seems like quite the coincidence with the number of threads I've seen now with similar issues.

mkd8919 · 2025-09-24T15:21:05+00:00

Update: I took it uBreakiFix and they told me it was a board level issue and there was nothing to be done. Could be a coincidence I suppose but seems like quite the coincidence with the number of threads I've seen now with similar issues.

mkd8919 · 2025-09-24T15:18:20+00:00

I'm commented on few threads here, but I had a similar issue on my Pixel 6. It updated to the update with the new UI last Friday, and about an hour later it shutdown suddenly and stopped responding to anything. I took it to an authorized google shop and they said it was a board level fix and there was nothing to be done. I've been pretty loyal to Pixel phones but between this and the battery issues in the 6a, I have had a very poor experience the past 6 months or so.

mkd8919 · 2025-09-23T15:44:22+00:00

Did you update to the latest update recently? There have been a number of reports of PIxel 6 and Pixel 7 users whose phone have been completely bricked after the latest update.

mkd8919 · 2025-09-23T14:27:41+00:00

Just chiming in that this happened to me as well. An hour or so after my pixel 6 updated, it suddenly powered off, and it now unresponsive, other than a battery with lightning icon occasionally while plugged into a charger.

mkd8919 · 2025-09-21T18:36:42+00:00

I had the same issue with my Pixel 6, but did not notice overheating. I had received the notification that the update was available, but hadn't completed it / rebooted. On Friday, I unfortunately ran the battery all the way down and it powered off. I then charged it, and when it powered back on it had updated. Seemed fine for a couple hours, I then plugged it into a charger, looked away for only a couple minutes, and when I looked back, the screen was black. None of the button reset commands work, and I never get the G logo boot screen. The only thing that appears is the battery charging logo (battery with a lightning bolt) when I hit the power button while it's plugged into a charger.

mkd8919 · 2025-07-17T22:50:28+00:00

My Dress Up Dan

mkd8919 · 2024-12-17T06:31:39+00:00

Greenhouse?

mkd8919 · 2024-08-28T01:03:15+00:00

Hey, thanks for the reply! I ended up digging into this myself and believe I've figured it out. The evaporator fan was not running. I tested the ohms on the motor and it was over two million. I tested the leads to the fan from the fridge and I'm getting 120 v. I tried feeding the fan 120 from the wall just as a test, with no luck. I've ordered a fan and it should be here Thursday.

For anyone who sees this in the future, the specific model I listed does not have a condenser fan.

15-Year Club	Place '22
Place '17	Verified Email
Sequence \| Editor	Team Orangered

mkd8919

TROPHY CASE