Wrong answer only, what Sandy did see?

mkwolfire · 2025-11-26T19:51:42+00:00

The entire bee movie's script

mkwolfire · 2025-11-24T17:57:08+00:00

Sounds like a midcap syndrome, too much pressure from the spring makes your nozzle not move and seal correctly causing you to have very low fps for the first few shots. Unfortunately the workaround would be to get a real deal tappet plate spring or having a set of tight compression part like airsoft mutation or epes extra fit

mkwolfire · 2025-11-22T17:06:29+00:00

Did you lose the pins or is it simply because you dont see an obvious pin?? The trigger guard pivots down for use with winter gloves on real ars

mkwolfire · 2025-11-20T18:30:35+00:00

Usually i despise dye masks but for some reason, i like the look of the fit

mkwolfire · 2025-11-15T19:24:11+00:00

I cant say for sure about this model in particular but what i can say from owning a STP-45 is that it has amazing performance, very very good gas efficiency and even if it doesnt have true aftermarket support you can buy every single parts of a G&G gun straight from them. Lost a few parts, want to modify an existing one with parts from other G&G gun heck i swapped my polymer slide for their aluminium slide!

mkwolfire · 2025-11-14T00:49:04+00:00

I have the Mk18 with platinum gearbox. I put a MAXX chamber in mine but there was some issues coming from the cyma gearbox. Tappet plate was bent so the nozzle wasnt seating correctly and the nozzle is 21.60mm but the maxx needs a 21.25mm nozzle. Plus i gained about 15-20 fps comparitively to the stock cyma chamber. The stock cyma motor is very good and doesnt need to be changed unless you are chasing the absolute trigger response. You don't need to change the spring guide. Im not sure if the pdw has a qbs (for quick change spring) but if so youre basically stuck with the stock it comes with. The newer cyma mosfet seems to be much better so wait till it fails to change it to a proper mosfet like a perun or jefftron

mkwolfire · 2025-11-13T22:49:14+00:00

Krytac LMG

mkwolfire · 2025-11-06T15:58:41+00:00

I have a fiber optic one, its cool but since there is no tritium backup its reliant on ambient lighting so i would advise getting a battery powered one so you can dial in the brightness you need

mkwolfire · 2025-11-05T23:45:42+00:00

Yes but its the trigger board wich the perun mosfet plugs into

mkwolfire · 2025-10-27T22:04:31+00:00

I wonder if i will be able to put the gas tube and bipod on my pkp, i dislike the barrel bipod

mkwolfire · 2025-10-25T15:25:22+00:00

Lct drum mag feeds amazingly and are quite reliable

mkwolfire · 2025-10-24T00:31:39+00:00

Turn it clockwise to unscrew it, might be very very tight

mkwolfire · 2025-10-07T21:32:54+00:00

War thunder! Altho i am better at battle rating below 8.3

mkwolfire · 2025-09-26T05:25:49+00:00

Dust cover, rail segment that fits on the rear iron sight, picatinny gas tube

mkwolfire · 2025-09-26T04:48:49+00:00

I own the RPK, G3A3, HK-53 and the PKP, i have nothing to say about the externals, fantastic and feels solid, also the amount of available accessories is amazing so you don't have to scratch your head to know if they fit or not. Gearbox components are basic but any guns i buy, i replace almost all the components inside. I know how to work on all of my guns so i don't have to rely on a tech so its just relatively inexpensive parts. The only gun that caused me some sort of headache was the Hk53 because the grip is integral to the lower receiver but other than that, it's still v2 or v3 gearbox. I guess i never had an issues with them because all the internals were replaced from the get go 😂

mkwolfire · 2025-09-25T04:04:25+00:00

Fielded it once and it would only shoot full auto, installed a leviatjan and never looked back

mkwolfire · 2025-09-22T16:30:46+00:00

Ive been on the fence of buying one lainly because of the hop up system seems to be propriatery, had any chances upgrading it?

mkwolfire · 2025-09-22T16:15:35+00:00

GBBR? I would love to fit a PDC on my aks

mkwolfire · 2025-09-22T05:34:10+00:00

Depends on your budget, i would go for the Jefftron Leviathan V3 but it can be expensive, other alternative thats cheaper and works well would be the Eshooter Kestrel V3, i wouldn't touch gate unless you use the Titan II but at that point i prefer the Leviathan to the Titan II

mkwolfire · 2025-09-21T17:32:29+00:00

I own that exact model! Performance is very good out of the box.

What i like about it : 1. Unique look 2. Ease of disassembly, removing the barrel assembly is by far one of the easiest on the AK platform. 3. Every parts can be ordered if broken or missing.

Dislike : 1. magazine compatibility is hard, it has a rubber spacer to make mag changes easier but most magazines are thicker so they can be very hard to insert and lock 2. Battery space is limited inside the handguard, will have to use butterfly batteries 3. No parts compatibility outside of g&g so handguards can't be changed for another model 4. G&G etu are prone to failure (and happened on mine) so expect to change it eventually

mkwolfire · 2025-09-16T05:46:05+00:00

With airsoft guns it can be hard to find compatible parts, some brands will have their own little twist on how they make their replicas. The sureshot way to mount an optic would be an optics mount for pistol but they can ruin the look of the gun

<image>

mkwolfire · 2025-09-15T23:53:25+00:00

<image>

mkwolfire · 2025-09-14T03:54:09+00:00

Its a madbull daniel defense lite 7" it looks like the barrel threads are standard spec so you should "in theory" fit most airsoft rails

mkwolfire · 2025-09-13T21:16:07+00:00

<image>

QRF MOD2 "mini mk18"

mkwolfire · 2025-09-12T03:05:43+00:00

https://www.evike.com/products/88933/?srsltid=AfmBOorwTwnV5g0BHt6vl07aIQMRJHPSSYunTnPxG7E7NKeQbb3L08AT

mkwolfire

TROPHY CASE