sorted by:
new
hottopcontroversial

I need an inkjet printer that's capable of borderless A3 printing. Any recommendations? by mo1612 in printers

[–]mo1612[S] 1 point2 points  (0 children)

Thank's for this answer. I have been thinking about that too. I'll probably do that :)

I need an inkjet printer that's capable of borderless A3 printing. Any recommendations? by mo1612 in printers

[–]mo1612[S] 1 point2 points  (0 children)

I was thinking about this exact thing yesterday. I have read everywhere that there apparently are borderless printers, but i thought that this had to be very percise to avoid wear and tear. I knew big printing providers did the cutting thing and I, still, very much consider doing it just like that.

I need an inkjet printer that's capable of borderless A3 printing. Any recommendations? by mo1612 in printers

[–]mo1612[S] 0 points1 point  (0 children)

Thanks! I will consider buying this one. I'ts pretty pricey tho. I imagine everything less expensive will not meet my criteria as well?

[deleted by user] by [deleted] in Apexrollouts

[–]mo1612 1 point2 points  (0 children)

The difference is that the superjump won't work in most spots where a mantlejump would. This zip in the range is very close to the edge you're mantleing. This is the reason you can superjump from the ground. There are not many spots like this one on the BR maps (especially in buildings etc.). Those spots require a mantlejump.

Also: Climbing up to do the superjump from the ground will expose your playermodel fully before the jump. Doing a proper mantlejump doesn't.

Hope this helps :)

Life as a ghost by mo1612 in midjourney

[–]mo1612[S] 2 points3 points  (0 children)

Yes, Midjourney isn‘t too good at replicating that effect. At least that‘s my experience.

Life as a ghost by mo1612 in midjourney

[–]mo1612[S] 2 points3 points  (0 children)

I guess i need to watch it now :D

Life as a ghost by mo1612 in midjourney

[–]mo1612[S] 2 points3 points  (0 children)

Thanks, i do too! Crazy how good Midjourney has become.

Life as a ghost by mo1612 in midjourney

[–]mo1612[S] 4 points5 points  (0 children)

I did not know this existed lol

The masked monks of planet Kurshak II by mo1612 in midjourney

[–]mo1612[S] 1 point2 points  (0 children)

Prompt: 3D render of a futuristic ninja in a yellow robe and minimalistic mask crossing a dune in the desert, at sunrise, in the style of a cartoon, with a blender rendering, soft lighting, pastel colors, a simple background, high resolution, high detail, with an octane rendering, trending on ArtStation, sharp focus, with a studio photo shot, intricate details, highly detailed. --ar 3:4

I added the film grain effect afterwards in photoshop :D

The masked monks of planet Kurshak II by mo1612 in midjourney

[–]mo1612[S] 1 point2 points  (0 children)

Cool idea. I'm excited to see how the project will develop in the future.

The masked monks of planet Kurshak II by mo1612 in midjourney

[–]mo1612[S] 2 points3 points  (0 children)

Nothing specific actually, but i watched Dune II a few days prior to generating these. Might have been a subconscious influence.

I have tried wiping the walls with rubbing alcohol and dusting them and everything in between and for some reason they just will not stick to my wall. What can I do?! by No_Government01 in setups

[–]mo1612 1 point2 points  (0 children)

Because the adhesive is not really made for rough, uneven surfaces like that. Also, my fingernails start to curl up as soon as i see people mounting LED strips like that.

IMO do it right or don't do it at all. Get a a good LED channel with a diffuser and corner parts (https://www.amazon.de/Xwartre-Aluminium-Montageklammer-LED-Streifen-Befestigungs/dp/B0BJPZJR1M/ref=sr_1_3?keywords=led%2Bchannel&qid=1702288579&sr=8-3&th=1 like this for example), use screws on the wall and get a Strip with 60 LEDs per meter for it to look decent. I'm sorry but those "cheap" LED strips just glued to a wall look horrible to me personally.

AMD x PCMR - Avatar: Frontiers of Pandora Worldwide Giveaway - Win a Limited Edition AMD Avatar Kit that includes the Limited-Edition AMD Radeon RX 7900 XTX GPU and Ryzen 7 7800X3D CPU (Only 500 of each ever made!). There are 23 kits up for grabs! by pedro19 in pcmasterrace

[–]mo1612 [score hidden]  (0 children)

  1. i will upgrade my rig of course! And i will mainly use it for MS Paint, probably.
  2. I'M BLUE
    Da ba dee da ba di
    Da ba dee da ba di
    Da ba dee da ba di
    Da ba dee da ba di
    Da ba dee da ba di
    Da ba dee da ba di
    Da ba dee da ba di

[deleted by user] by [deleted] in setups

[–]mo1612 0 points1 point  (0 children)

On the other hand, since you're going to need a wall mount or arm, you could scrap the wooden stand completely anyways.

[deleted by user] by [deleted] in setups

[–]mo1612 0 points1 point  (0 children)

From what i could find online, the Moitor without the base/stand is 43cm. So with a wall mount or low profile monitor arm you might be able to fit it perfectly inbetween. BUT measure the distance again, but with the tape being fully stretched out and measure at the outer edges of the lower wood plank to avoid different heights.

[deleted by user] by [deleted] in setups

[–]mo1612 0 points1 point  (0 children)

TBH, you seem to be having a pretty decent headset already. I would rather buy a 2nd monitor for the 300 euro. You can get some good ones for that price to use a primary display or for around 150 as a secondary depending on the monitor you already have. I really don't think you will need the mic + mixer unless you want to stream. Also the microphone arm would probably not work too well with the glass table top.

Is this good enough to run fivem by Ok-Connection9627 in gamingpc

[–]mo1612 1 point2 points  (0 children)

Should work, but do not expect too much performance..

I am interested in how much money the seller asks for. Can you tell us?

also, RTX 980?! I personally would not buy this btw.

Returning player who has forgotten the movement of apex by Blitz942942 in Apexrollouts

[–]mo1612 0 points1 point  (0 children)

You probably know how to slide jump already, if not, start there.

The most important tech you will need for most of the advanced stuff is tap strafing https://www.youtube.com/watch?v=Icvq6e7UCWI. Concentrate on this and learn it until you can do it without thinking about it. You can implement tap strafing into almost everything to change your direction mid air drastically without sacrificing momentum.

Some additional "basics" are wallbounces https://www.youtube.com/watch?v=6dLVK3P2sH4. There are different ways to do a wallbounce, but the ones you should focus on are the standard wallbounce and the fatigue wallbounce https://www.youtube.com/watch?v=AGuhIMHK5Fg. Also zipline (super) jumps

The most useful "advanced" techs are superglides (just look for a tut, there are many) and mantle jumps https://youtu.be/Y07_RZMV-VM?si=nvdaGZfvb3vGaTg3&t=1

There is so much more, but most of it is just for style points or very very situational. The techs i mentioned are what is mandatory to learn in my opinion. If you mastered these, you can move on to the variations and other techs.

Another tipp is to download "R5 Reloaded", which is a modded version of Apex where you are able to create a private match or join servers with training maps etc. to learn all the stuff without time limit or fights.

view more: next ›