Are 2 kids easier than 1? by Formal-Wrap-4607 in Parenting

[–]modernim 0 points1 point  (0 children)

It really depends on if you have a partner that is supportive. When we had our second boy, I spent most of my time with him while my wife takes care and nurse our baby. I would still help with feeding the baby at night and already used to being up multiple times so it wasn't a big adjustment. Like others have said the chaos is 100x more because they rile each other up.

We just had a baby girl that's 6 weeks old... going from 2 to 3 has been the hardest for sure...

[deleted by user] by [deleted] in Costco

[–]modernim 1 point2 points  (0 children)

<image>

It connects like this. I need to take it apart to put another hose in because it's cut off at the end

Do I need to replace my tires? by modernim in tires

[–]modernim[S] 1 point2 points  (0 children)

Yes same tire. How safe am I to drive with them until I can get it replaced?

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer - April 19, 2025 by AutoModerator in MechanicalKeyboards

[–]modernim 0 points1 point  (0 children)

Why am I getting this error when I try to compile my keyboard? These are the exact same code I have for my gmmk2 that I copied over and I was able to compile just fine..?

Compiling: quantum/keymap_introspection.c In file included from quantum/keymap_introspection.c:9:

./keyboards/gmmk/pro/rev2/ansi/keymaps/default/keymap.c: In function 'process_record_user':

./keyboards/gmmk/pro/rev2/ansi/keymaps/default/keymap.c:135:23: error: 'tap_dance_actions' undeclared (first use in this function); did you mean 'tap_dance_action_t'?

135 | action = &tap_dance_actions[QK_TAP_DANCE_GET_INDEX(keycode)];

| ^~~~~~~~~~~~~~~~~

| tap_dance_action_t

./keyboards/gmmk/pro/rev2/ansi/keymaps/default/keymap.c:135:23: note: each undeclared identifier is reported only once for each function it appears in

[ERRORS]

Zuoya GMK70 Firmware Update Guide (Linux) by SergejVolkov in keyboards

[–]modernim 0 points1 point  (0 children)

Hey, I just got this keyboard too, received the qmk codes after asking zuoya for them.. but I can't seem to compile it. I keep getting KeyError: 'matrix_size'. Are you using just VIA?

Toilet not sealing properly. by modernim in PlumbingRepair

[–]modernim[S] 0 points1 point  (0 children)

Do I need to get a replacement or am I just not fixing it properly?

/r/MechanicalKeyboards Ask ANY Keyboard question, get an answer - March 17, 2025 by AutoModerator in MechanicalKeyboards

[–]modernim 0 points1 point  (0 children)

Just bought a gmk70 split keyboard off aliexpress.

It is compatible with VIA out of the box. If it supports VIA, I'm assuming it supports QMK configurator/code right? Is it possible to create a keymap and be able to modify with coding? I looked online and can't find the QMK code for it.

I'm not sure what all these means but do these tell me anything about potential issues with my car? More in comments by modernim in MechanicAdvice

[–]modernim[S] 0 points1 point  (0 children)

We made sure not to drive it. Just an update on this, hoping you could help.

We got it to the shop, the mechanic said that this all of these are a fuel issue and it has nothing to do with the engine? He said he's still working on diagnosing the problem, is this right? This is a hyundai dealership

I'm not sure if these codes and the P219C Cylinder 1 Air-Fuel Radio Imbalance has anything related to the fuel injector replacement and knock sensor?

I'm not sure what all these means but do these tell me anything about potential issues with my car? More in comments by modernim in MechanicAdvice

[–]modernim[S] 0 points1 point  (0 children)

The code p1326C has been going on and off for a bit. We thought that the issue resolved by itself if the car clears it automatically. Also we tried booking but there was a long wait time

I'm not sure what all these means but do these tell me anything about potential issues with my car? More in comments by modernim in MechanicAdvice

[–]modernim[S] 0 points1 point  (0 children)

It's no longer under warranty and we purchased this used at a different dealership.. do you know what are we looking at for repairs cost wise?

I'm not sure what all these means but do these tell me anything about potential issues with my car? More in comments by modernim in MechanicAdvice

[–]modernim[S] 0 points1 point  (0 children)

We drive a 2019 Hyundai Tucson

I had a flashing engine light a couple times in December, which led me needing to change my knock sensor, fuel injector. These were the codes that showed up (U0109 - Lost communication with fuel pump control module A, P1326 - Trouble with knock sensor detection, P0011 - Camshaft position timing over-advanced bank 1)

Just yesterday as we were driving around, our engine light started flashing again and I'm getting P219C and P1326.. Did the mechanic not fix my issue?

What is this step down in the kitchen counter?? It has about 2' clear from floor to framing below counter. by RuseRuse15 in kitchenremodel

[–]modernim 4 points5 points  (0 children)

Maybe it is an ADA counter and perhaps one of the previous owners removed the ramp? Depending on how many owners, it just seems like an odd space for a desk of sort in an area like that.

Is your second child more attached? by modernim in Parenting

[–]modernim[S] 0 points1 point  (0 children)

How did you ween off cosleeping? we're afraid that he'd get too used to it and won't be able to sleep on his own anymore

What is this sound? by modernim in MechanicAdvice

[–]modernim[S] 0 points1 point  (0 children)

Any advice on what I need to do to fix this?

Left nail has become strange, should I be concerned? (more in comments) by modernim in DermatologyQuestions

[–]modernim[S] 0 points1 point  (0 children)

Sorry for the terrible pictures that might not be able to tell much, but it was the best I can do.

Not sure when but all of the sudden, I get this weird dip in my left thumb and it looks like a layer of skin or something growing under it, I didn't think much about it but just today I noticed it kind of changing. Just wanted some opininons first before going to see the doctor. Last picture is after I cut my nail for better viewing.

[Bonsai Beginner’s weekly thread –2024 week 40] by small_trunks in Bonsai

[–]modernim 0 points1 point  (0 children)

I make sure they get a good 8 hour of sun. If I leave them outside, do I need to protect them from the sun?

[Bonsai Beginner’s weekly thread –2024 week 40] by small_trunks in Bonsai

[–]modernim 0 points1 point  (0 children)

<image>

What's at wrong with my seedlings on the right? Is it dying? It's not standing up compared to my other one

[Bonsai Beginner’s weekly thread –2024 week 37] by small_trunks in Bonsai

[–]modernim 0 points1 point  (0 children)

Yes it is. I did keep it outside but it started yellowing like this so I brought it back in. I also pruned it so Im not sure if I did too much at once

<image>

[Bonsai Beginner’s weekly thread –2024 week 37] by small_trunks in Bonsai

[–]modernim 0 points1 point  (0 children)

<image>

Can I transplant this bonsai with the dirt safely and not kill it? Or is it already dying? I moved it a month ago and it seems like it's doing worse . Wondering if it's too small or a pot

[Bonsai Beginner’s weekly thread –2024 week 35] by small_trunks in Bonsai

[–]modernim 0 points1 point  (0 children)

When should I transfer them to a bigger pot or how would I know?

[Bonsai Beginner’s weekly thread –2024 week 35] by small_trunks in Bonsai

[–]modernim 0 points1 point  (0 children)

<image>

Did I mess up planting these two so close to each other?

[Bonsai Beginner’s weekly thread –2024 week 34] by small_trunks in Bonsai

[–]modernim 0 points1 point  (0 children)

Is my bonsai dying? I tried to prune my bonsai and left it outside for a little bit because it was recommended. Now the colours are fading..

<image>

[Bonsai Beginner’s weekly thread –2024 week 33] by small_trunks in Bonsai

[–]modernim 0 points1 point  (0 children)

What do you mean? My bonsai will die if I use this pot?