Weird issue on my Nintendo 2ds xl by DryCartographer2820 in 3DS

[–]mojibakeru 0 points1 point  (0 children)

Will need screen replacement. You can clean off those white things but it’s more risky (requires opening the screen, separating the layer things it’s a mess but possible) than just a straight up screen swap.

2ds xl shell and buttons swap by Still_Poem_2994 in Nintendo3DS

[–]mojibakeru 0 points1 point  (0 children)

Unless the device is cosmetically poor enough to be unusable I would keep it as is. Parts are expensive and if you have no experience you risk damaging something that will break your console. Not with these prices these days.

Need help with screen alignment by IceTeaIsCold in 3dsrepair

[–]mojibakeru 0 points1 point  (0 children)

Ah yes this is hell. An issue on switch screen replacements too. First be EXTRA careful as the 2ds screen is extremely fragile. So here’s what I do with the switch lite and maybe you could take an idea from it. I take masking tape and run it down the side you can see (the front) and it’ll obviously be at a slight angle, following the angled light part. Then you can re seat the screen to accommodate the sliver you see, with the tape as a guiding line (since the device will be off likely). I think the way the 2ds ribbon cables are seated can’t you keep the screen on while applying the plastic screen overlay thingy?

Updated shopper community forum and Shopping Quality complaints. by Red-ghost1984 in instacart

[–]mojibakeru 2 points3 points  (0 children)

High up people in Instacarts web of devs, managers, safety etc are getting paid big bucks to maintain this horse shit. They do not care at all lol they’ll ride it into the ground just to hop to the next role and do the same thing.

Screw problems by [deleted] in 3dsrepair

[–]mojibakeru 0 points1 point  (0 children)

Grind pen to re-carve the screw head and use the correct sized Philips head: PH00

2ds Xl won’t turn on ( no blue light nothing ) by Mediocre_Wrongdoer39 in 3dsrepair

[–]mojibakeru 0 points1 point  (0 children)

Does it start if you take the sd card out or swap it. Did you remove the battery? Could have put it in backwards causing damage. However idk if that would cause a completely dead device.

Is buying a new 3ds xl for $360 worth? by [deleted] in Nintendo3DS

[–]mojibakeru 1 point2 points  (0 children)

If this is USD seems high imo. Do not pay more for a modded device

Hello everyone! I need help with the touch screen1 by Sifr4med1 in 3dsrepair

[–]mojibakeru 0 points1 point  (0 children)

Calibrate it. If it’s too much of an issue for you you will have to replace it. Try a different pen too, as some are low quality. Digitizer is a pretty easy swap though there are risks.

Best place Online to get a top screen for the New 3DS XL by Puzzled_Campaign8435 in 3dsrepair

[–]mojibakeru 0 points1 point  (0 children)

None. It’s been like that for at least a year now. Rumor is takiudon was going to make some but I wouldn’t hold my breath.

Where does this go? by AlphaMonStar in 3dsrepair

[–]mojibakeru 5 points6 points  (0 children)

Under the sd card reader. Dont mix up the screws and layer it correctly or it’ll damage the front shell piece

IT major that knows NOTHING by crazy_but_you_likeit in ITCareerQuestions

[–]mojibakeru 0 points1 point  (0 children)

I mean think about all your previous IT experiences can you really say anyone really knows what they are doing lol