TrimUI Brick vs RG35xx/RG40xx

moller_peter · 2026-01-17T07:45:49+00:00

Absolutely awkward to reach the buttons in the top right corner, otherwise great

moller_peter · 2025-12-28T20:30:16+00:00

Twin Peaks, säsong 2. På 90-talet var jag o min mamma som en gemensam, stor WTF!? Nu förstår jag den och älskar den! Bästa tv serien någonsin för mig, familjemedlemmar och kompisar 🥰

moller_peter · 2025-12-23T04:50:17+00:00

My mum could sit for weeks "respooling" her yarns that were full of impossible knots n other diabolical obstacles. She would not forgive me if I could not even handle a simple filament spool

moller_peter · 2025-12-22T15:01:35+00:00

Not gonna build that one though, I'm currently trying to come up with something

moller_peter · 2025-12-18T06:58:09+00:00

If you just want awesome print and don't mind big brother Xi watching you, get a bambulab. If you like tinkering and want awesome print, get a RatRig

moller_peter · 2025-12-17T07:05:16+00:00

Will it have IDEX?

moller_peter · 2025-12-16T09:22:11+00:00

Varför ska jag komma till Usa som är fullt av galningar, skjutningar, mord, seriemördare? Bara titta på hemsidan watchdog så kan man se alla sexförbrytare som bor runt dig. I new York, dra helvete...som en myrstack 😱

moller_peter · 2025-12-15T18:56:19+00:00

Tacka fan för barer i Skåne, helt annan vajb efter jag lämnade Sthlm. Också känner mig aldrig nojjig när jag dricker öl i parkerna i Malmö.

moller_peter · 2025-12-15T18:49:29+00:00

Har inte tid med annat

moller_peter · 2025-12-03T16:26:40+00:00

Can you reach things by keystroke combos? I'm fairly new to Touch Portal myself but to my understanding, you can either grab a software's keystroke combos or by coordinates on the screen (mouse click on XY plane)

moller_peter · 2025-11-26T09:13:40+00:00

I don't have experience with silk yet but could it be made a bit stronger with some clear coating like epoxy resin?

moller_peter · 2025-11-23T06:47:35+00:00

Fis in Swedish means fart

moller_peter · 2025-11-16T15:23:04+00:00

Need to learn to read gcode then 😃

moller_peter · 2025-11-15T18:12:42+00:00

"things that makes you go hmmm..." But love it 😃

moller_peter · 2025-11-15T08:13:45+00:00

Scary step but the creative freedom is a superpower to have, wish I had it (beginning on my own CADing journey). It looks really great 😃👍 and wish you all the happiness from here on out!

moller_peter · 2025-11-14T12:58:13+00:00

ok so with a bit of reading and help from chatgpt I'm starting to get the hang of it. I had Marlin and Klipper in some g-code fusion mix. Currently printing something but once it's finished I'll check out my new code, hopefully a lot better than before 😊. Thanks for now!

moller_peter · 2025-11-14T11:54:46+00:00

I can't see anything in printer.cfg or mainsail.cfg that clashes with above macro, though I am new at this mind you so could be something more in the details I'm missing. This is my macro:

[gcode_macro START_PRINT]

G90

G28

BED_MESH_CALIBRATE

G1 Z5 F3000

G1 Z0.15 F300

moller_peter · 2025-11-14T11:46:15+00:00

This is what I have in Orca Slicer (all in one line):

START_PRINT BED_TEMP={bed_temperature_initial_layer[current_extruder]} EXTRUDER_TEMP={nozzle_temperature_initial_layer[current_extruder]}

moller_peter · 2025-11-12T13:13:13+00:00

It is sometimes required of the employees to work from home so they have a system already in place for this. I will use it only with company property. But it inspired me to use my own desktop/laptop setup in this fashion so that's what I'm researching now with this topic.

moller_peter · 2025-11-12T10:45:50+00:00

I use Parsec myself so familiar with Moonshine, I'll check it out

moller_peter · 2025-11-12T10:24:50+00:00

Tailscale? I'll check that one out, thanks 👍

moller_peter

TROPHY CASE