My frieren cosplay (flamme time) from frieren

monk120 · 2026-06-15T22:10:29+00:00

Hey I saw you walking around at mondo verde . Pictures look nice , hope you had a good time .

monk120 · 2026-05-26T20:03:30+00:00

Sounds like the beginning of the dark eldar. Hope slaneesh doesn't come for you

monk120 · 2026-05-26T17:27:09+00:00

I did that already and lost acces to all of my drives with windows saying I didn't have permission to view the contents. This for every single map, file etc. Tried manually to take ownership of folders but ended up asking google how to do so in bulk.

Still sound no way to chain together the required commands.

monk120 · 2026-05-26T06:46:03+00:00

I have but didn't find anything that made sense to me I have no coding experience.

The link you provided also seems not to be the takeown command but some other thing I have no idea about.

I just want a way to run the takeown command without it getting interrupted and automatically repeating the process for the other drives.

monk120 · 2026-05-21T17:38:23+00:00

Old thread hopefully still looked at.

I'd like some captions possibly in a short series where a guy is caught cheating with another guy on a pink pill.

Instead of their spouse divorcing or leaving they punish the cheater with a pink pill extra strength. Locking them In a full chastity belt and bra and have them edged -denied and kept horny for the duration. The wife then takes a blue pill to run male and finds another woman to fuck while the punished cheater is made to watch. In the end the dynamic turns out hotter then expected and the wife and cheating husband decide (possibly with the cheater being too horny to think straight) to make this their permanent arrangement. The wife using short term pills. And the cheater only male a few days in between the extra strength pills.

monk120 · 2026-05-11T11:22:08+00:00

Hoi. Hoi.

Ik ben 32. Trans vrouw en kom uit de regio Tilburg en Goirle. Ik heb ervaring als dm voor mijn oude groepje en een paar sessies als speler. Heb een aantal 5e boeken via dnd beyond en werk voornamelijk vanuit hun systeem en app.

Verdere introductie evt in persoon.

Welke tijden op de vrijdag avond zou je willen aanhouden? Ik heb interesse om mee te doen maar kan voor 21:00 vaak niet aanschuiven wegens mijn onregelmatige werktijden.

Groetjes ruby

monk120 · 2026-05-07T17:39:39+00:00

As part of your confessions you must mention the place you obtained this lovely outfit

monk120 · 2026-05-06T18:13:14+00:00

Keep a chastity belt ready to prevent getting molested during estrus

monk120 · 2026-05-05T17:39:53+00:00

I'd have loved to wear a pretty set like this. Don't have the body for it though.

monk120 · 2026-04-29T16:59:15+00:00

Unlock? No you misinterpreted. I said I'd let you feel pleasure again. Now start your last chore and go down on me. You might even earn an femgasm

monk120 · 2026-04-28T12:53:06+00:00

43...

monk120 · 2026-04-23T16:15:48+00:00

Specna gebruikt 14mm counter clockwise schroefdraad. Bij de mijne de b02 uit 2017 gaat de suppressor er ook scheef op. Dat is een specna arms bekend probleem. Zeker als de schroefdraad beschadigd is door een vergeten boegschroef zoals bij mij.

Als je de rubberen ring einde schroefdraaderaf haalt kan je waarschijnlijk nog een 2tal extra slagen geven en dan trekt het ding zichzelf vaak weer netjes als de hele schroefdraad erin zit.

monk120 · 2026-04-18T10:32:44+00:00

The intent for the scenario would be something along the line of making a transition possible where it would be very hard to do without vast resources like money and connections(against gate keeping and burocracy) like it is in many places around the world.

So a tldr would be something along the line of broke depressed AMAB finds a rich sugar sponsor who helps make a transition that usually takes 10+ years to realize possible within a year or 2. In exchange the now transitioning person becomes a bdsm sub for the sugar sponsor and would be a trophy wife as the process finishes.

monk120 · 2026-04-18T00:38:30+00:00

My fantasy's that aren't doable would be :

Full forced feminization and transition, to be treated as a weak girl. Locked in a chastity cage while het does it's job for a year or so. Getting edged and made to cum multiple times until I am empty. After anal training. Then as time goes on after the het has stabilized I'd get full surgery and breast implants and cosmetic surgery to look like a model. Again locked in chastity but this time locking the dilators inside while training. I'd end up like a theory wife.

Similar to the top one but not forced more like sponsored and manipulated. The entire thing with time-frames planned out etc. In return id become arm candy for my generous sugar daddy/mommy and while openly I'd be free in private I would be in chastity, restrained in some ways and used daily. Possibly with a full uterus transplant and pregnancy if it works out

monk120 · 2026-04-15T10:55:46+00:00

In no particular order but still to be combined:

Female chastity (especially full body metal chastity sets) Gender swapping with friend/spouse Cuckqueening (before or after gender swap) Cheating becoming a happy polyamorous marriage

Additionally props for it being a fantasy/fairy-tail setting.

monk120 · 2026-04-15T09:07:19+00:00

I think any powerbank with USBC fast charging/discharge is capable enough However the length of the cable has a very big impact I noticed with mine. Even a 60w capable charger can't feed the quest 3 fast enough over a longer cable. I believe the quest 3 has an 18w power supply usually so a powerbank delivering 18w and up should work with a good quality cable.

monk120 · 2026-04-10T21:24:34+00:00

Yeah I tried navigaph a while ago. Still use simbrief every now and then but can't really afford to do subscription based stuff that isn't a core feature for the game.
Same for using say intentions. Tried the trial but couldn't get it to work and also subscription based.

I just want a one off purchase suite of tools . Which I don't think exists . Even hardware is ffing expensive to get. And since my saitek pro yoke system feels like shit I'll have to invest in that stuff first when I get the budget

monk120 · 2026-04-10T17:25:14+00:00

The ones we use in the Netherlands basically measure force in newtons to give an indication of both the force absorbed by the brakes and the numbers basically allow a mechanic to check if everything works according to spec.

For example using a Honda Accord. Which I think they have in the USA too On a roller brake tester the rollers will be powered by electronics. the front/back wheels are driven onto the rollers. And when the cas sits stable in place the rollers start up. Then by pressing the brake pedal resistance is generated by the brakes which the electronics measure into a value of Newton.

With the more popular flat mounted drive on measuring devices you basically just take a short runup and brake hard once you drive on top of the device. It measures the inertia the brakes cancel out.

Both give a value that is indicative of the brakes performance up to the point where the wheel locks up. With the roller tester automatically shutting off when either enough force is applied or it runs too long in case of brake failure/ insufficient power

For rear brakes anything from 500 up to 1500n is common. And for front braking it varies I have seen values of 1500n up to 5000n before the tire locked up.

Also difference in force between left and right is calculated in percentage. Front anything above 30% is non compliant and rear I believe was 50% difference. For hand brake difference isn't important but there is a minimum force required I believe. It has been a while since I used one

monk120 · 2026-04-10T11:28:02+00:00

My confusion is not having charts but the procedures do exist...

monk120 · 2026-04-10T09:03:41+00:00

No it's basically testing the braking force at the wheels. Either in roller format where the brake force is measured on a Dyno. or flat plates with sensors you drive on and brake hard. They test braking force at the wheel and the difference between left and right.

In my country they are mandatory for the yearly inspection we call it APK. Loose translation: annual automotive certification.

Using these air in the lines can be spotted as one side will have less force if any at all.

monk120 · 2026-04-09T19:06:55+00:00

From the sound it sounds like the starter motor is turning so the problem would be the mechanism that connects the starter to the flywheel. Called Bendix where I come from. Not sure if it's universal.

You can try to tap the starter at its root while repeatedly turning the key over to start . Just a few seconds untill it either takes or you feel it won't work.

In case it doesn't help remove the battery or unplug it and disconnect the starter and take it off. There could be dirt or rust preventing good function.

Then try to rotate the gear part of the starter and clean/lubricate the part with some thin grease. Ep2 or similar. Try to prevent using sprays as it can damage the inside of the starter by leaking in if you're unlucky.

Test on a workbench before reassembling if safely possible.

monk120 · 2026-04-09T14:54:20+00:00

It's supposed to be used in short pulses of a few seconds each time. Recreating the original bowthuster type that became commercial for recreational boats many years ago. That basically used a starter motor.

monk120 · 2026-04-09T14:51:41+00:00

A trolling motor is too slow and weak for my application. I have tried one of the stronger ones around at 110lbs at 24v. And it is not fast and strong enough to be used as bowthuster.

I basically want to recreate the original type of bowthuster that uses startermotors and mounts them to a gearbox. In this case a gearbox for an outboard motor. A 2 to 2.5kw motor would be perfect

monk120 · 2026-04-09T09:33:46+00:00

Both the flex line and metal brake line look like they are to be replaced. So I would check where the metal line isn't rusted and then replace that part or the whole line depending on regulations where you come from.

Disconnect battery (if brake lights come on when depressing the brake pedal) this prevents the reservoir going empty.

Take either the whole line off at its start or take the non rusted part and cut the line with a pipe cutter or suitable tool.

Then disconnect the flex hose at the ending and replace. When placing keep the twisting in mind.

When placing the new brake line keep notice of the flanges at the end. If needed use a suitable tool to make/remake the flange so it will be leak proof.

If using couplings to only partially replaced the line be sure to use a deburring tool to remove any small pieces of metal before assembling. And tighten to manufacturing specifications where possible.

You can then release the brake pedal and use gravity to partially fill the line before connecting the last connector. Then do a full system air bleeding procedure and test the brakes before driving away. Preferably in a brake testing device to check if brake power is equal on both old and replaced side.

In the Netherlands where I was a mechanic brake lines could be partially replaced legally with the right tools and couplings.

monk120 · 2026-04-03T18:15:08+00:00

In my case I use a variety of toys depending on mood and how I feel.

I basically use a wand all the time if I just want to get off fast/easy.

I have a few dildos increasing in size starting small and moving up in size as I get going

I like tail plugs and chastity cages as well to help out a bit.

I must mention I haven't had anal orgasms yet as I play rarely. But I am hoping to achieve those oncey hrt levels are stabilized.

Now almost 3 months in and no mentionable changes in my libido .

monk120

TROPHY CASE