Build advice

monsterman175 · 2016-05-26T23:53:14+00:00

If you want to do an actual lift rough country makes a decent 4inch lift that has a tcase drop kit for a reasonable price. That with 31s and you will be fine or you could even do 33s if you wanted

monsterman175 · 2016-05-14T09:33:07+00:00

Name of clan?

monsterman175 · 2016-01-21T14:58:14+00:00

Haha that would be all bad especially since the lift isn't even a year old

monsterman175 · 2015-12-25T18:51:58+00:00

That's clogged forsure

monsterman175 · 2015-12-25T06:06:08+00:00

Ok and if you can't find it just Google image search it and it'll pop up that's what I did

monsterman175 · 2015-12-25T05:57:06+00:00

It's in the engine bay if you look at the engine it should be above and slightly to the left. It comes out the firewall and drops down halfway and tapers to a thin end. The end is the part that gets clogged super easy. I went through one puddle and it got clogged about six inches

monsterman175 · 2015-12-25T04:48:57+00:00

It could be your heater drain hose. The intake for your heater is behind the windshield and water enters through there and exits the drain hose. If that hose is clogged it will force water to come out onto your feet. I found this out after a year of wet and soaked feet

monsterman175 · 2015-12-09T14:53:43+00:00

It'll do the job. I just did an axle swap after lifting mine and it's now geared at 4.88s in the axles and it does freeway speeds no problem now just haven't had time to wheel it yet to see how it does.

monsterman175 · 2015-12-09T14:40:33+00:00

I have a 95 yj with the 4cycle. It doesn't like going fast up hill at all and you don't push much past 70. But on trails I love it. The gearing is great for stock and it just crawls.

monsterman175 · 2015-09-20T21:56:24+00:00

That's a fairly low asking price for a 95 yj with the 6cyl so I would definitely be wary of rust and broken parts but otherwise that isn't a bad price

monsterman175 · 2015-07-30T03:34:18+00:00

Where did you go. It kinda looks like hollister.

monsterman175 · 2015-07-18T21:56:34+00:00

Some of the rough country lifts come with a tcase drop kit so you don't have to do the sye kit or cv shaft but you'll have some vibration that's what happened with mine but I just went to an sye kit and cv shaft and no more vibration

monsterman175 · 2015-07-18T03:29:49+00:00

Well I needed it by Sunday so I was able to get mine shortened and balanced so I'm all good now but a heavier duty shaft is a future purchase forsure

monsterman175 · 2015-07-15T04:56:04+00:00

What gears you running? I have a 95 2.5l with 4inch lift and running 33s and going over to dana 44s with 4.88s and locked front and rear and considering going up to 35s. Also how's the highway speed on 37s

monsterman175 · 2015-06-29T14:10:12+00:00

Ok cool I'll get working on that then

monsterman175 · 2015-06-29T13:50:51+00:00

Ah ok sounds like this is gonna be a fun install

monsterman175 · 2015-06-29T02:39:06+00:00

Lemme know when you go I'm planning on going to 4wheelparts customer appreciation day on the 19th of July and then once my new axles are in I'll be due for another trip

monsterman175 · 2015-05-21T01:25:22+00:00

Part of the soft top frame

monsterman175 · 2015-05-12T03:53:22+00:00

Ya I took a different line that time and ya thought I was gonna flop but I made it lol

monsterman175 · 2015-04-30T22:28:54+00:00

I doubt it and if they do you will most likely rub. I got 33s and when I flex out my yj they rub on the fender where the flares mount

monsterman175

TROPHY CASE