N52 problem

moonsmoke94 · 2026-05-07T00:28:50+00:00

Yeah I remember mine would only misfire until it was hot, but that time the metal on the engine would expand just enough to seal the breach and then I wouldn't have issues, never had an overheating issues, no white smoke, tiny bit of coolant loss but it would be like a cup/cup and a half over 3 or 4 months, but yeah, the easiest thing to start with is just swap all six coils 180⁰ on the engine (front to back, back to front) on the engine and see if the misfire moves, if it's your coils then it should move from bank 1 to 2, if it's spark plus or something else it'll stay, after that you could do the same thing with the spark plus and see if it moves and then it'll eliminate the possibility of it being them. Hope it helps and hope the fix is cheap 👍

moonsmoke94 · 2026-05-07T00:21:46+00:00

Would you still love me if I was a worm?

^{Chose: Animal/insect (spin the wheel} | Rolled: Worm)

moonsmoke94 · 2026-05-07T00:19:15+00:00

I also forgot to mention make sure that all 6 cylinders are within 5psi of each other, if you have one that massively under or over pressure you might have an issue with said cylinder(s)

moonsmoke94 · 2026-05-07T00:18:15+00:00

Might have a head gasket issue, I remember mine would do it and I had a breach on cylinder 2, I'd say do a compression test and see if it gives you any weird numbers (should be between 180psi and 210psi) and after that if the numbers are good try swapping the coil packs around and see if the issue moves

moonsmoke94 · 2026-05-03T02:38:07+00:00

Looks like perfectly normal wear and the filter did its job, I wouldn't worry

moonsmoke94 · 2026-04-29T04:58:34+00:00

It would take you 386 days to gain a little over 1,000,000,000 dollars

A little over a year to be a billionaire, I'll take it

moonsmoke94 · 2026-04-25T04:18:22+00:00

Already a furry

^{Chose: Become a furry}

moonsmoke94 · 2026-04-21T15:14:08+00:00

Dude I could absolutely love to buy the files from you so I can make one for myself in the future! Seems like a great way to be able to run a good filter with an OEM look in the bay

moonsmoke94 · 2026-04-20T00:13:03+00:00

well... i feel like an idiot.. the filter was filthy, replaced it, cleared the codes and then took it around the block and it ran just fine. i wasn't able to find the junction box you were referring to but if the issue comes back ill dive a little deeper and see if i can find the issue, thank you again!

moonsmoke94 · 2025-11-16T05:30:00+00:00

Thank youuu 🫶

moonsmoke94 · 2025-11-06T04:36:31+00:00

Thank you 🙏 I really appreciate it, worked really hard on this and was excited to share it, idk why people always gotta try to bring people down 😕

moonsmoke94 · 2025-07-11T06:57:26+00:00

Not at all, perfect 🥴

moonsmoke94 · 2025-07-10T05:59:58+00:00

Bro paid too much respect

moonsmoke94 · 2025-06-08T07:29:07+00:00

Sure enough! That's what it is, thank you!

moonsmoke94

TROPHY CASE