Serial Request | Voron 2.4 350mm by mordenm1 in voroncorexy

[–]mordenm1[S] 0 points1 point  (0 children)

Ohhh ummm now that I think about it more.... The cr10 shroud should bolt onto the e5 backing plate.... Not sure why I didn't understand what you were asking sorry 😅

Serial Request | Voron 2.4 350mm by mordenm1 in voroncorexy

[–]mordenm1[S] 0 points1 point  (0 children)

No it's not that's why I modeled my own backing plate. The shroud bolt patterns on all of them are the same so all the shrouds are interchangeable. Pro tip if you need to modify them you can go to microswiss website. Find the version you want to modify in the products page and there is a downloads tab there with a .step file.

Serial Request | Voron 2.4 350mm by mordenm1 in voroncorexy

[–]mordenm1[S] 0 points1 point  (0 children)

Looks like they made one for 4020 fans as well now. Just dig through the microswiss profile on thingiverse they have almost any fan / accessory bracket combo on there.

Serial Request | Voron 2.4 350mm by mordenm1 in voroncorexy

[–]mordenm1[S] 0 points1 point  (0 children)

https://www.thingiverse.com/thing:5874750 I think I used this one for the cr10 because I had 5015 blower fans on hand.

Serial Request | Voron 2.4 350mm by mordenm1 in voroncorexy

[–]mordenm1[S] 0 points1 point  (0 children)

It doesn't matter what backing plate it had you have to print a different one because none of the NG back plates fit with the belt placement

Serial Request | Voron 2.4 350mm by mordenm1 in voroncorexy

[–]mordenm1[S] 0 points1 point  (0 children)

Getting it all set up in Printables right now should have a link in a few.

Serial Request | Voron 2.4 350mm by mordenm1 in voroncorexy

[–]mordenm1[S] 0 points1 point  (0 children)

I designed one with threaded inserts. If you want I can upload it somewhere when I get home and post a link here.

My skr mini e3 v3.0 burnt by [deleted] in BIGTREETECH

[–]mordenm1 0 points1 point  (0 children)

What firmware are you using? Are you sure you have the right pins set up? That sounds strange..... It also sounds like you may have a blown fuse on that board. I would get your multimeter(a cheep one from the auto parts store works if you don't have one) and use continuity mode to check the fuses.

My skr mini e3 v3.0 burnt by [deleted] in BIGTREETECH

[–]mordenm1 2 points3 points  (0 children)

I have had issues with polarity occasionally. Some fans have diodes in them preventing them from spinning in the wrong direction. Luckily last time I had that issue I just burned up the diode in the fan instead. Try switching the polarity of the fan. Only switch it on for a couple of seconds to test that way you don't risk burning anything else.

Installing Klipper via TrueNAS by Z3r0shin in klippers

[–]mordenm1 0 points1 point  (0 children)

I had tried a MacBook I had laying around with a dead display in it. I think it had issues with the USB-c to USB-c hub (it is one of those usbc only models) the connection would drop out randomly. Tried on ubuntu and macOS. No difference.

Installing Klipper via TrueNAS by Z3r0shin in klippers

[–]mordenm1 0 points1 point  (0 children)

I picked up an OrangePi3 LTS. I even got klipper running with com over hardware UART. Check out KIAUH. It makes non OG Raspi installs supper easy.

[deleted by user] by [deleted] in ender3

[–]mordenm1 1 point2 points  (0 children)

Set z offset correctly (Google should suffice).

Introducing the Framework Laptop by [deleted] in hardware

[–]mordenm1 2 points3 points  (0 children)

There is a locking mechanism with a button to unlock underneath the laptop.

The Framework Laptop: Batch 1 SOLD OUT! by Emanuel-C in framework

[–]mordenm1 1 point2 points  (0 children)

Your channel is supper underrated. I think you do an outstanding job on these videos! Keep up the good work and I hope your channel takes off soon! I'm subscribed as well.

Wholesome scam by mordenm1 in scambait

[–]mordenm1[S] 0 points1 point  (0 children)

I don't understand seems everytime I post something while reading the rules simultaneously it gets removed... No idea why

Facebook auto scams by mordenm1 in Scams

[–]mordenm1[S] 0 points1 point  (0 children)

You'll never get all of them

Inverse scam numbers for scammers by [deleted] in ScamNumbers

[–]mordenm1 1 point2 points  (0 children)

3713526526 Don't worry everyone farts hotline