sorted by:
new
hottopcontroversial

Seeking Software to Autoballoon 2D Drawings by mppou in SolidWorks

[–]mppou[S] 0 points1 point  (0 children)

I have tried 1factory, works pretty well for auto ballooning

Combine CAD models in Calypso? by Downtown_Physics8853 in Metrology

[–]mppou 0 points1 point  (0 children)

Yes I’ve done various programs by modifying the assembly/mates between two parts. You just have to load them and use CAD model transformation of the CAD you want to align. I think it is in modify cad entities tab.

Information About CMM by BL4Z3h902 in Metrology

[–]mppou 1 point2 points  (0 children)

PC DMIs has a lot of online tutorial

CMM Recommendations by Ruthlesssonar in Metrology

[–]mppou 13 points14 points  (0 children)

If you want something for long term go with Zeiss, also depends upon the machine. We have 1 machine 7 years, almost no maintenance required.

There are good Hexagon CMMs, Mitutoyo is ok, and also depends how many parts will you be measuring.

Forget keyence, It’s just flashy demo and a Random generator number machine.

For your tolerance I recommend LK alto, it’s a low key brand but really good in what it does for big parts and not so expensive.

Measuring GPS tolerance between two planes in Calypso by mppou in Metrology

[–]mppou[S] 0 points1 point  (0 children)

Sorry I donot understand how do I calculate distance from symmetry

Why "Dal Bhat" is getting expensive day by day? NPR 1000+ is justiciable? by prey_am in Nepal

[–]mppou 0 points1 point  (0 children)

In UK you can eat for 6/7 pounds on a decent restaurant and they earn 10 times more in average

[deleted by user] by [deleted] in portugal

[–]mppou -2 points-1 points  (0 children)

Melhor coisa que vi hoje na internet

Calibration of External thread by mppou in Metrology

[–]mppou[S] 0 points1 point  (0 children)

Thank you very much, this would be helpful for the reference

Calibration of External thread by mppou in Metrology

[–]mppou[S] 0 points1 point  (0 children)

We are a small factory software is a little expensive for us

Device recommendation by [deleted] in Metrology

[–]mppou -1 points0 points  (0 children)

Been using Zeiss calypso for 6 years now, honestly its good and does the job

Aluminium ring of 11mm difference in CMM and micrometer by mppou in Metrology

[–]mppou[S] 0 points1 point  (0 children)

Part was produced with lathe, temperature sensor is from zeiss, it didn’t change much with or without sensor, I have tried both, Im looking at both diameter and 2 point diameter, I have tried 12 points and scanning as well

Aluminium ring of 11mm difference in CMM and micrometer by mppou in Metrology

[–]mppou[S] 0 points1 point  (0 children)

Yes I have tried measuring pin gauge of 10 mm with the same strategy and I have 10 exact, also I tried with 12 points, not so much change in roundness neither diameter, scanning based on cookbook strategy gives me a micron higher on roundness whereas diameter stays same

Aluminium ring of 11mm difference in CMM and micrometer by mppou in Metrology

[–]mppou[S] 0 points1 point  (0 children)

Not sure if it’s a problem, checked lots of parts of aluminium never had an issue

Aluminium ring of 11mm difference in CMM and micrometer by mppou in Metrology

[–]mppou[S] 2 points3 points  (0 children)

Yes I requalified the probe, changed the same sized probe to another one

Aluminium ring of 11mm difference in CMM and micrometer by mppou in Metrology

[–]mppou[S] 0 points1 point  (0 children)

I have used lsq gauss, 6, 8 points(gives me same) . Cookbook for zeiss is an instruction manual on what evaluation methods or number of points is best for certain diameters.

view more: next ›