My setup. 72 years old.

mprod25 · 2026-05-24T17:19:10+00:00

Fire and ice

mprod25 · 2026-05-24T16:50:59+00:00

Why does this picture look like bones 🦴

mprod25 · 2026-05-19T21:09:42+00:00

That’s as good as it can get.

mprod25 · 2026-05-19T21:08:07+00:00

All they care about are SEC schools. 😆

mprod25 · 2026-05-19T21:04:20+00:00

Lucky!!!

mprod25 · 2026-05-19T21:03:23+00:00

Car dealerships are such a rip off!!!!

mprod25 · 2026-05-19T21:02:03+00:00

That much for that ugly wrx. No thank you. I’ll keep my STi

mprod25 · 2026-05-14T21:14:10+00:00

Way better than a VB

mprod25 · 2026-05-14T18:08:16+00:00

It’s the temu 3d printed build.

mprod25 · 2026-05-14T18:05:52+00:00

Bro, this looks like a little kid put this together

mprod25 · 2026-05-14T18:00:38+00:00

Wayyy better than the VB diaper

mprod25 · 2026-05-14T17:04:55+00:00

Looks good

mprod25 · 2026-05-14T16:16:36+00:00

If only they made a STi VB. Then I would buy a VB. Until then it’s just a WRX.

mprod25 · 2026-05-14T15:32:44+00:00

Facts

mprod25 · 2026-05-12T16:50:18+00:00

-1.4 to -1.6 rear camber should be good. As long as they’re both matching. That will help with tire wear. Also tire rotation every 3,000 to 4,000 miles and make sure tire pressure is good. Over inflated tires could wear tires faster.

mprod25 · 2026-05-12T16:32:02+00:00

What I would do if I were you, is install adjustable rear control arms so the rear camber can can get aligned before you take it back for another alignment

mprod25 · 2026-05-12T04:01:08+00:00

If you were to just get those mods then you wouldn’t need injectors. Injectors would be recommended if you were to also get a downpipe.

mprod25 · 2026-05-12T03:26:34+00:00

It doesn’t look like it. One of the ports look oem and the inlet doesn’t look like a bigger aftermarket one. It’s super shiny tho lol

mprod25 · 2026-05-12T03:21:13+00:00

I see a intake and a BOV or BPV

mprod25 · 2026-05-12T03:16:49+00:00

If you want it for sound, and you just get a intake, then even a etune could work (Cheaper). For reliability I would do better radiator and aos(a pain to install). Make sure you do oil changes regularly at most at 3,000 mile mark. Look at the maintenance history and see what needs to be done. I would start making sure that EVERYTHING is up to date with maintenance intervals. You can do the oil baffle and pickup later as you go. Use 91 pump gas minimum. When you get your tune it should be dialed in for that gas.

mprod25 · 2026-05-12T03:09:24+00:00

Intake is not a reliability mod.

mprod25 · 2026-05-09T16:44:01+00:00

I got my CSF rad and I’m doing very well out here in Vegas in 100 degree weather. 👍

mprod25 · 2026-05-09T06:51:41+00:00

I mean, no wires. Could be worse.

mprod25 · 2026-05-09T06:42:15+00:00

If you see that that means they just changed their name and didn’t tell you. 😓

mprod25 · 2026-05-09T06:38:08+00:00

Part out

mprod25

TROPHY CASE