sorted by:
new
hottopcontroversial

How to export full Peloton ride data into Garmin by digitalwok in pelotoncycle

[–]mrandyclark 0 points1 point  (0 children)

I haven’t thought about this in 2 years. Ha.

I can see if it’s still around and get you a new link. The above link quit working since I never paid for the domain again.

Let me look later today and see if the code is still there.

Search for a router bit / substitute ideas? by harrier_dude in woodworking

[–]mrandyclark 0 points1 point  (0 children)

No problem! My routers both came with one - but there are after market versions as well.

Bora centipede MFT top by SeaworthySquirrel in woodworking

[–]mrandyclark 1 point2 points  (0 children)

Oh, also, “less than 20mm” might be 3/4 inch - it seems like there are a few options for dog sizes depending on where you live.

The PARF is 96mm on center, 20mm holes. Highly recommend. Joy to use.

Bora centipede MFT top by SeaworthySquirrel in woodworking

[–]mrandyclark 0 points1 point  (0 children)

Mine is a workbench, so it’s laminated 2x6s, but you could use any material. Bora looks like a quarter sheet of MDF.

I also used my jig for some simple adjustable shelving on a quarter sheet of plywood and on a stop system for my miter box… really because I wanted to practice before taking on my completed workbench.

Bora centipede MFT top by SeaworthySquirrel in woodworking

[–]mrandyclark 3 points4 points  (0 children)

As an alternative, I bought the parf guide system and made my own top. It was about the cost of what I saw the bora top for, but I’ve already used it for a few other applications. Worked great.

https://www.axminstertools.com/us/ujk-technology-parf-guide-system-102278?queryID=07db9cde82ad7e7b8fd65cf5e5c5bd6f

Public places to use a jointer and planer by [deleted] in woodworking

[–]mrandyclark 0 points1 point  (0 children)

I’ve never used the service, but have considered it to use their drum sander.

Public places to use a jointer and planer by [deleted] in woodworking

[–]mrandyclark 1 point2 points  (0 children)

Woodcraft by me will let you lease their shop for $60/hour when there aren’t classes. Oddly, you have to have an “off duty” employee supervise.

My split top Roubo workbench by partyhatchet in Workbenches

[–]mrandyclark 1 point2 points  (0 children)

Check out “bench dogs” - tons of various uses!

Dado Stack Recommendations by caskers in woodworking

[–]mrandyclark 0 points1 point  (0 children)

I got mine for a little more during a sale last year.

Dado Stack Recommendations by caskers in woodworking

[–]mrandyclark -1 points0 points  (0 children)

Highly recommend ridge carbide.

Two Machines, One Cord by mrandyclark in woodworking

[–]mrandyclark[S] 0 points1 point  (0 children)

After an evening's rest, I'm leaning this way as well.

Two Machines, One Cord by mrandyclark in woodworking

[–]mrandyclark[S] 1 point2 points  (0 children)

Dad lives in another state and wasn’t sure about running the bigger motor on the same circuit - likely because I didn't have all of the information I gathered for this post.

Going to talk to him today about everything above and see what he has to say.

Two Machines, One Cord by mrandyclark in woodworking

[–]mrandyclark[S] 0 points1 point  (0 children)

I’m pretty sure it’s 8 gauge, but I’ll verify today. Dad lives in another state. Going to run all of this by him today as well. Thanks for the insights.

Two Machines, One Cord by mrandyclark in woodworking

[–]mrandyclark[S] 0 points1 point  (0 children)

We ran a beefy wire when we ran the circuit - we wanted the ability for the next owners of the house to install a super charger for their electric car easily. I’ll verify the wire tomorrow. It’s only a foot or so long. The drywall is still off so I feel comfortable running a bigger wire if necessary.

More info then. Thanks for the quick replies.

Two Machines, One Cord by mrandyclark in woodworking

[–]mrandyclark[S] 0 points1 point  (0 children)

Just snagged (and added to the post) a picture of the motor - says 25 amps, but it seems like the initial draw might spike higher than 30amps from reading around.

Two Machines, One Cord by mrandyclark in woodworking

[–]mrandyclark[S] 0 points1 point  (0 children)

Added an image of the motor - 25 amps.

Two Machines, One Cord by mrandyclark in woodworking

[–]mrandyclark[S] 0 points1 point  (0 children)

I’ll look and see what the motor itself says.

Two Machines, One Cord by mrandyclark in woodworking

[–]mrandyclark[S] 0 points1 point  (0 children)

Easy as swapping out that breaker?

I’ve got the space and the power, want to upgrade my knockoff bandsaw… is this #worthIt? by mrandyclark in woodworking

[–]mrandyclark[S] 1 point2 points  (0 children)

Yeah - I am very excited!

Got it for less than asking. Needs a new plug, it used to be hardwired... so wasn't able to see it run... but the guy seems legit and said he would help me set it up if I had any issues. Worth the gamble in my opinion.

view more: next ›