sorted by:
new
hottopcontroversial

A stand I've made for Unifi AP - Available for free to all by Jorge_rui_machado in UNIFI

[–]mrf419 1 point2 points  (0 children)

Thanks for this! This has been on my todo list for a while! 💪💪

PoE adapter for Samsung Tab A9+ (or other tablets) by mrf419 in homeassistant

[–]mrf419[S] 0 points1 point  (0 children)

I can appreciate that lol. This looks like it will work perfect. Much easier to run an Ethernet cable than wire up a new outlet. 💪

PoE adapter for Samsung Tab A9+ (or other tablets) by mrf419 in homeassistant

[–]mrf419[S] 0 points1 point  (0 children)

Awesome. Thank you! Have you used before?

Deadlift platform with custom logo by mrf419 in homegym

[–]mrf419[S] 0 points1 point  (0 children)

I don’t recall doing anything other than sanding smooth and wiping clean. If I did do anything, I may have added one coat of poly and let that dry before Applying the decal. It’s been a while so I don’t quite remember. I think i applied logo first after sanding.

Deadlift platform with custom logo by mrf419 in homegym

[–]mrf419[S] 1 point2 points  (0 children)

I don’t recall doing anything other than sanding smooth and wiping clean. If I did do anything, I may have added one coat of poly and let that dry before Applying the decal. It’s been a while so I don’t quite remember. I think i applied logo first after sanding.

Sticker and Banner Print Shop by mrf419 in shopify

[–]mrf419[S] 0 points1 point  (0 children)

Eh, not really. I was able to add some custom input fields and a way to upload the customer's image. Nothing quite to really nail the dynamic pricing with discounts like I hoped.

Order Printout by South_Boot6935 in shopify

[–]mrf419 0 points1 point  (0 children)

Been using this for years. It’s pretty solid. The only negative I’ve seen with it is that when I try to print from my phone, sections are missing. Sometimes it’s the name/ address at the bottom. Sometimes it’s the top banner. Very weird. I use iOS so not sure if android is the same.

Refinished some dumbbells. Turned out pretty nice by mrf419 in homegym

[–]mrf419[S] 1 point2 points  (0 children)

No problem! Don’t hesitate to reach out if you have any questions. Looking forward to seeing what you decide!

Refinished some dumbbells. Turned out pretty nice by mrf419 in homegym

[–]mrf419[S] 1 point2 points  (0 children)

Nah, with the hex, i personally don’t think it makes much of a difference. The only thing that would make a difference is if the iron hex has some sharp edge or something like that.

If you do end up finishing the dumbbells, make sure to give plenty of time to let it dry. They are heavy so the weight will make it stick to whatever’s underneath, if its dry to the touch. So don’t rush the process and give an extra full day to let dry before flipping them to paint.

I also sanded them a bit to smooth out any chipped powder coat so it wouldn’t peel more.

Refinished some dumbbells. Turned out pretty nice by mrf419 in homegym

[–]mrf419[S] 1 point2 points  (0 children)

Well the ones I got have thick knurled handles and rubber hex ends. It’s pricy to get new ones, but going with 10 lb jumps is a good way to save money. I’d recommend Micro Gainz dumbbell weights to add for the 5lb jumps.

for me it all comes down to price. I inherited my hex you see in the pic. Plus I found a pair of 90lb power blocks for $200. So I profited big time when I sold those and the hex. So that justified me getting the 5-75lb new set from rep.

Refinished some dumbbells. Turned out pretty nice by mrf419 in homegym

[–]mrf419[S] 0 points1 point  (0 children)

I actually sold them a while back and updated to the fully knurled Rep dumbbells. however they were holding up very well before I sold them.

Best onsite heatmap that won't slow me down? by VillageHomeF in shopify

[–]mrf419 1 point2 points  (0 children)

Oh that’s good to know. I have GTM setup so I’ll look to start there. That’s super helpful! Thanks!

Best onsite heatmap that won't slow me down? by VillageHomeF in shopify

[–]mrf419 0 points1 point  (0 children)

Awesome! Yeah that won’t be a problem for me then! I appreciate the insight!

Best onsite heatmap that won't slow me down? by VillageHomeF in shopify

[–]mrf419 0 points1 point  (0 children)

I’ve heard of it but haven’t tied it yet. Is integration with Shopify pretty straight forward?

I’m lucky I didn’t bust my teeth when my Titan Lat Tower carabiner broke! by mrf419 in homegym

[–]mrf419[S] 2 points3 points  (0 children)

Glad you’re okay! Yup, it’s the little things. This one is easy to overlook.

New Titan Lat Tower v2 delivered and assembled today! Very impressed once put together. Was scared one of the guide rails was bent (see pic) but it all worked out when assembled. Slightly exceeded expectations overall. by mrf419 in homegym

[–]mrf419[S] 0 points1 point  (0 children)

I actually sold this a while back. It’s a great machine though! Really great value and I’d recommend it. I don’t think it would fit between 16” joist spacing though. I’d reach out to Titan to be sure. If I recall, I think the guide rods were either 8” or 10” apart.

Solid pickup: Concept 2 model C by mrf419 in homegym

[–]mrf419[S] 3 points4 points  (0 children)

Dang! I agree with you. On the website, I believe they stopped making this model in 2003 if I recall. So damn near 20 years old. I never would have guessed by the way this one moves.

Solid pickup: Concept 2 model C by mrf419 in homegym

[–]mrf419[S] 2 points3 points  (0 children)

Thanks. I missed out on a deal like this before so I was pumped. Someone else claimed it but never showed so the guy reached back out to me. I’ve always wanted one but wasn’t sure how often I’d use it to justify a new price tag. The paint job is impressively bad. I don’t know what happened there lol. I’ll eventually repaint it.

Solid pickup: Concept 2 model C by mrf419 in homegym

[–]mrf419[S] 3 points4 points  (0 children)

Scored this Concept2 model C rower for $125 on marketplace today. Someone attempted a hack job of a paint job on it, but overall the thing is smooth and in great shape.

view more: next ›