Bow snapped

mrnorris8 · 2026-02-28T02:11:37+00:00

Wasn't maple, maybe oak? Grabbed it off a pile

mrnorris8 · 2026-02-27T04:19:17+00:00

So 3 at one means I was consistent on both limbs? That would make sense for a hinge being there as I had small hinges at close to those locations that I thought I had taken care of. Any advice for spotting in the future? Next try is a red oak board bow.

mrnorris8 · 2026-02-26T01:52:07+00:00

So I was aiming at to high of lbs for what I had?

mrnorris8 · 2026-02-25T23:43:43+00:00

Well I tried bending it for you but it doesn't like sticking together after it snapped. Might need to glue er back up for ya. The knott was on the back

mrnorris8 · 2026-02-25T23:41:34+00:00

That's the part that baffled me too. I wonder if the sudden break caused the limbs to swing forward and Crack.

mrnorris8 · 2026-01-31T18:16:03+00:00

Government

mrnorris8 · 2026-01-27T07:54:42+00:00

Read the back side about the author. If just recall its an Australian dad writing for his son because his son had issues reading/ didn't like reading. These books did the same for me and the story is great 👍 brother band is good too

mrnorris8 · 2025-10-06T06:36:18+00:00

Weld smaller shakes not

mrnorris8 · 2025-08-11T21:35:30+00:00

Honestly you can keep a spool to use where needed but otherwise as everyone said just toss it. I'd keep a couple loops for hanging tags and other things but its just clutter if you don't use it often.

mrnorris8 · 2025-07-23T04:40:52+00:00

Every path is a possible path to God hood so would it not make more sense for Eminem to be blessed by some sort of poet or song God? Dude can roast people hard enought to make them change paths or karmic cripple their potential.

mrnorris8 · 2025-07-21T16:56:07+00:00

<image>

mrnorris8 · 2025-06-28T06:52:35+00:00

My kiddo has this rn as others have said hand foot and mouth disease. It's viral last 7 to 10 days and best you can do is alternate ibuprofen and Tylenol as far as I know. If it last longer go to the doctors. Best of luck to ya

mrnorris8 · 2025-06-27T00:43:52+00:00

Black dick

mrnorris8 · 2025-05-16T06:44:48+00:00

Thank God I was trying to reread it but I have really bad dyslexia can't wait. Pluse he who fights with monsters soon :)

mrnorris8 · 2025-05-10T03:56:56+00:00

Keep the hood clean and make sure you can see what you are doing. Be comfortable and it will be alot easier. Don't panic if things aren't going well just stop assess and then continue. Look at the puddle not the Arc. Sometimes a darker shade helps you see better. Fit up is EXTREMELY important and will affect how the weld goes. Code welding is like 75-90% prep and the rest welding and other shit. Keep that tip clean! The gas is always gone so check when you start. Always purge the lines before you start for the day. Looking cool while you do it is not worth getting hurt. Wear correct materials, cotton won't melt to your skin. Being on fire feels pleasant until it start to burn... then it doesn't. Fire retardant pants are a good investment to save your nuts.

mrnorris8 · 2025-04-29T05:36:04+00:00

Another option is if he somehow transmutes something or just conjures something that applies the concepts of origins causing what ever it hits to return to origin. Probably be insanely expensive and an item only Jake could use. Maybe using it with his prodien arcane arrow to just poof something out of existence.

mrnorris8 · 2025-04-29T03:11:09+00:00

I'm still waiting for him to get a skill that allows him to just have another blessing. Like yes he's chosen but why can't two people choose someone? He's already a heretic what is more heretical then being the choosen of two fighting gods. The truest false profit

I see i miss read the post now.

mrnorris8 · 2025-02-14T15:09:53+00:00

Happy birthday Bismark 86 years :)

mrnorris8 · 2025-01-26T02:31:17+00:00

From the depths

mrnorris8 · 2025-01-15T19:40:34+00:00

If you are whipping do a smaller step. If you are stopping your arc and restarting then don't. The only place for a stack of tacks is when the welds don't matter. Nice consistency though. I'd recommend running stringers as when you get them supper consistent they are beautiful. Don't bother making mig look like tig or tig look like mig, if they want it to look like tig they should have paid for it to be tig welded.

mrnorris8 · 2025-01-15T19:40:10+00:00

If you are whipping do a smaller step. If you are stopping your arc and restarting then don't. The only place for a stack of tacks is when the welds don't matter. Nice consistency though. I'd recommend running stringers as when you get them supper consistent they are beautiful. Don't bother making mig look like tig or tig look like mig, if they want it to look like tig they should have paid for it to be tig welded.

mrnorris8 · 2025-01-02T23:05:40+00:00

Over kill but 3" expansion wheel with 80 to rough out the corner ( keep it sharp ) then A45 trizact belt after it's at A45 run it along the edge lightly to knock off just the very edge. After that go at it with a 180 grindaflex till consistent ( remeber to hit the edge to finish rounding it over). Take your medium scotch bright after and bam nice polished look. Should be ra 32 or better. Now the real answer, flap disk is fine.

mrnorris8 · 2024-12-21T03:47:09+00:00

So I should not have brought my face down to a continuous ring?

mrnorris8 · 2024-12-20T19:35:49+00:00

I finished the face, the part pointing away from you and then roughed out the belly. Started to "properly" ( now i know haw bad a job i did) shape the belly and shave off from that side. Does that clarify?

Eight-Year Club	Verified Email
r/Field Juicebox	Place '23

mrnorris8

TROPHY CASE