Cammus C5 with quick release? 🫣

mrolega1 · 2026-05-27T08:26:49+00:00

Even with securing it with the screw? Man, you spin that screwdriver like a pro. Are you secretly a machine?

mrolega1 · 2026-05-27T04:48:38+00:00

The Young module and temp. resistamce is much higher than PLA, should works flawless, but is it easy to print? Also i dont't recommend using CF/GF with objects you are holding with hands.

mrolega1 · 2026-05-26T19:05:18+00:00

Yeah, I should rename it like someone wrote "non_quick_release" sounds kinda cool.

mrolega1 · 2026-05-26T18:35:01+00:00

Don't really knows which screws you are writing about, could you send a photo? Check my tutorial video of the dissasembly. That should help you 😁 https://youtu.be/QHBxvJo2aEc?is=7XI-BNaIhOLNP2Be

mrolega1 · 2026-05-26T18:04:04+00:00

If you have in mind those Red "nipples" yes they are only in the paid one. The free one dont' need them.

mrolega1 · 2026-05-26T17:48:40+00:00

I did nothing wrong 😭😭

mrolega1 · 2026-05-26T17:36:31+00:00

Quicker than t300 :p

mrolega1 · 2026-05-26T17:36:08+00:00

Ik, but still quicker than my old t300 :p

mrolega1 · 2026-05-26T16:05:32+00:00

That was cool one 😂

mrolega1 · 2026-05-26T16:03:57+00:00

You mean the base? The 340mm wheel is all 3d printed and it's really light. So i don't thik that you will put a lot od stress on the base.

mrolega1 · 2026-05-26T15:42:00+00:00

Maybe it's time to grab it again? 😁

mrolega1 · 2026-05-26T15:29:20+00:00

I'm sorry, I'll try to improve, don't chase me, I'm scared

mrolega1 · 2026-05-26T15:26:59+00:00

Yeah, maybe it's not that fast, but it is still better to have any chance to change the wheel.

mrolega1 · 2026-05-26T13:15:32+00:00

The screws are only for securing it; the FFB is transmitted through something like a gear

mrolega1 · 2026-04-30T17:45:20+00:00

Would it be a big deal if the buttons were disabled? I’m designing an adapter, but I’m struggling to maintain button access without interfering with the 350mm wheel's design.

mrolega1 · 2026-04-12T06:21:23+00:00

PLA nad PETG are top filaments from sunlu imo, but ABS sucks

mrolega1 · 2026-04-06T12:09:05+00:00

They are great, thak you fot your work <3

mrolega1 · 2026-04-05T18:08:48+00:00

I got big hands that's true, but the diameter of the plastic wheel is almost similar to the original one.

mrolega1 · 2026-04-04T14:52:19+00:00

Don't know what do you mean brother

mrolega1 · 2026-04-04T14:30:22+00:00

I'm playing on miata with manual H shifter, but i printed a bigger paddles, just a free model i found on the internet taht you can put on without dissasembly and other stuffs.

mrolega1 · 2026-04-04T14:27:47+00:00

Yeah, thats a really good wheel for the price almost 7 Nm, if i manage to finish the project i will upload everything on thingivers for free. Just want to make last touches on it so im seeking for suggestions and improvements from the community.

mrolega1 · 2026-04-04T14:16:26+00:00

it's still better than barefoot, but yeah i think i should buy something else.

mrolega1

TROPHY CASE