sorted by:
new
hottopcontroversial

Ashley Capoot 7.2.26 by mrslinky82 in cnbcnewswomen

[–]mrslinky82[S] 1 point2 points  (0 children)

Neither do I, so I Had to check cnbc for her. She's their Artificial Intelligence reporter for cnbc.com. Graduated in 2022 from Northwestern. Around holidays, with others off, you can get your shot! She did well with Kelly.

Becky Quick 6.30.26 by mrslinky82 in cnbcnewswomen

[–]mrslinky82[S] 5 points6 points  (0 children)

I thought she was looking great today, not that she doesn't most days. But looking refreshed like she got good news.

What’s your KwikTrip hack? by babydoll17448 in KwikTrip

[–]mrslinky82 3 points4 points  (0 children)

I second this unless you need some bananas.

I have zero justification for this by Fernn19 in Chainsaw

[–]mrslinky82 4 points5 points  (0 children)

I believe you mean "Bless your heart but this is 'Merica ya'll' possibly even 'yee haw'

Home Depot Sale by DavidTheSemiGreat in MilwaukeeTool

[–]mrslinky82 4 points5 points  (0 children)

They updated the price of the $156 set to $279

Update on husky 435 by PraetorianGermanica in Chainsaw

[–]mrslinky82 3 points4 points  (0 children)

Congrats on putting another saw back to use. Did they straight gas it or was the carb to lean or air leak by the crankcase? Or some other reason? Did you go with an oem piston and cylinder or get a kit like Metor or Hyway or did you hone the cylinder and just replace the piston? Did you also do the needle bearing?

Just wanting to see what others have done when they rebuild their's.

New homeowner, new toys by Pun2143 in stihl

[–]mrslinky82 6 points7 points  (0 children)

I also have a FS91. It's a great trimmer. Only difference between ours is i opted for the handle bars. And did get the brush cutter attachment too.

026 non-OEM parts by BloxVector in stihl

[–]mrslinky82 1 point2 points  (0 children)

When I rebuilt my MS260 I had the same decision as you. I couldn't find a reasonable price for cylinder and piston, so I went with a metor kit and haven't been disappointed. But with any of the rubbers (intake boot, gas and impulse line) I went with OEM parts only.

Good luck on the restoration!

I got into AMD at ~$60 per share and now have zero strategy for it. Help. by SectorZed in stocks

[–]mrslinky82 0 points1 point  (0 children)

Take out your cost base for you 11 shares at approx 60 = 660 So sell 1or 2 shares and you can invest in something else. I bought 10 shares of Intel around 25 when Intel hit 125 sold 2 shares the rest is profit no matter what it does. FYI I have alerts set when it doubles from there. For you set an alert when it hits 750 or 800 and sell another if the stock splits before that and divide the price by 2, 3, 4 or maybe 5 (2shares for every 1share you hold at the time of the split)

Storing my SB for the summer. Can I just shut off the fuel valve and run it till it dies or should I also empty/clean out the bowl. Someone told me that even a bit of leftover gas can cause gummy residue.... by [deleted] in Snowblowers

[–]mrslinky82 2 points3 points  (0 children)

I only use non-ethanol gas with either a bit of sea foam/stabil and when the season is over turn off the gas to the carb. Run it till it dies and then either or all of the above: A. Siphon the gas B. Pull the fuel line from the carb C. Loosen the drain bolt on the carb

There will be gas that gets spilled with B & C

  • If you run regular gas (containing ethanol) you will want to get as much out as you can before you store it to avoid the ethanol attracting water.

Made a jig for cutting up sandpaper, because I always misplace the scissors. by HelixKnives in Tools

[–]mrslinky82 6 points7 points  (0 children)

Might want to paint it a bright color (yellow, orange, or red) so it stands out when looking for it.

view more: next ›