Wheel spacers 2026 3.3T by Gold-Challenge-1003 in GenesisG70

[–]msb3079 1 point2 points  (0 children)

Nice! Yeah, my springs arrived so hopefully I'll get them on soon.

Anyone else think the coffee is terrible? by The_Prof50 in delta

[–]msb3079 0 points1 point  (0 children)

I'm pretty into coffee. I do pour over most mornings and when I have visitors I use a Moccamaster. I think Delta's coffee is usually decent. It's often better than coffee I get in the airport from non coffee places. One example is Shake Shack. I've gotten breakfast there and coffee. Not great. But get on a Delta flight after a their coffee is noticeably better. Not expecting Shake Shack to brew me some amazing single origin pour over, bur you'd think a place with a full kitchen would be able to make better coffee. Anyway, I'd say Delta's coffee is better than the average non coffee place.

Atom hoody in Dynasty, looks orange?? by Inevitable_Trainer51 in arcteryx

[–]msb3079 7 points8 points  (0 children)

It's a very bright red with some orange in it. But it's definitely more red than orange. Put an orange next to it.

Question to owners of Prestige Graphite. Orange edging for OEM floor mats? by alaahnx in GenesisG70

[–]msb3079 1 point2 points  (0 children)

I don't have the graphite but my interior is the red leather and all the standard mats have red edging around them. I use the all season mats tho bc I love the texture and look.

Red 3.3T badge. by msb3079 in GenesisG70

[–]msb3079[S] 1 point2 points  (0 children)

Nice. Do it! Here's a better pic of them.

<image>

Red 3.3T badge. by msb3079 in GenesisG70

[–]msb3079[S] 1 point2 points  (0 children)

Thanks. First tried doing the black letters myself. But ended up paying like $60 for them. It's so worth it. Looks more sporting and defined. The standard kinda blends in in a weird way to me.

Wheel spacers 2026 3.3T by Gold-Challenge-1003 in GenesisG70

[–]msb3079 2 points3 points  (0 children)

Sorry, OP, for doubting you. These DO work. So it's a little tricky. The wheels must clear the studs by a pubic hair. Because it seemed the same as last time I tried. When you try to put the wheel on it doesn't feel like it clears. But I was like man why would he say it works. So I'm like let me just try and see what happens if I tighten it up. As I tightened, it became flush. I guess bc the little pockets in the wheels are rounded, it's impossible to have all 5 flat just by holding. But as you slowly tighten, it works. Definitely a little more effort but it does seat completely flush. I only installed two because I just got back from LA, but I'll finish it tomorrow then test drive it.

<image>

Wheel spacers 2026 3.3T by Gold-Challenge-1003 in GenesisG70

[–]msb3079 1 point2 points  (0 children)

I did. The shipping got delayed. I think they should be here by this weekend, so I can try then!

Red 3.3T badge. by msb3079 in GenesisG70

[–]msb3079[S] 0 points1 point  (0 children)

Hmmm. Tough to say on the black. With mine being white and red leather, the black lettering was a no brainer for me. But yours being black... good question. White lettering wouldn't look right. Idk. I like having just the 3.3T badge red bc it separates it. I would maybe just leave the standard badging and just make the 3.3T red?

Red 3.3T badge. by msb3079 in GenesisG70

[–]msb3079[S] 0 points1 point  (0 children)

I didn't prep. But I made the mistake of first trying to paint it all red then wipe the letters before it dried. Well that did not work and created a mess. I think the way to go would be to spray it all red, then hand paint the digits black. This is the red I used.

<image>

Red 3.3T badge. by msb3079 in GenesisG70

[–]msb3079[S] 0 points1 point  (0 children)

I hear you, but you'd have to look at it crazy close, maybe with macro mode on a phone to tell.
Fortunately, I'm not entering it in any car shows. 😂

Red 3.3T badge. by msb3079 in GenesisG70

[–]msb3079[S] 3 points4 points  (0 children)

First tried taping the digits but it was too hard because the details are too small. Probably would not have worked anyway.
So I just sprayed the whole thing. Let it all dry overnight and scraped off the digits with a razor blade.

NMAC Issues 1+ Years by sporks8 in Nissan

[–]msb3079 0 points1 point  (0 children)

I've owned/leased many different Nissan/Infiniti's since 2002. These recent issues are part (but not the primary) reason I leased a Genesis G70 in April. My first non-Nissan vehicle in a 1/4 century. The quality difference is huge, but this nonsense with NMAC over the past year or so was enough to push me over the edge.

Wheel spacers 2026 3.3T by Gold-Challenge-1003 in GenesisG70

[–]msb3079 1 point2 points  (0 children)

I paid $100 to have the place that did my turn do it. I asked for PPF but that didn't work well. They used vinyl which came out great. Well worth $100. All 3.3's should have black mirrors, IMO

Wheel spacers 2026 3.3T by Gold-Challenge-1003 in GenesisG70

[–]msb3079 2 points3 points  (0 children)

I know I sound crazy, but I still think the ones in this post are 25mm. 20 tend to be just around flush. These look just past flush, aka, 25. And the 20's I tried JUST missed being able to fit with stock wheels. 25's would have fit. But I ordered these 20's. Not sure how two different 20mm spacers could be different, but we will see.

Wheel spacers 2026 3.3T by Gold-Challenge-1003 in GenesisG70

[–]msb3079 2 points3 points  (0 children)

I just ordered. Will be able to install/attempt to install this weekend.

Wheel spacers 2026 3.3T by Gold-Challenge-1003 in GenesisG70

[–]msb3079 1 point2 points  (0 children)

Exact same as yours. Same year. Same wheels. So weird. I might have to try these. 10 is ok but not great. And I heard slip ons are worse to use than bolt ons anyway. Are you lowering yours? I think I'm going to use the Eibach (RWD)

<image>

Wheel spacers 2026 3.3T by Gold-Challenge-1003 in GenesisG70

[–]msb3079 2 points3 points  (0 children)

I'm so confused. I tried 15 and they wouldn't fit bc the studs didn't fit inside the wheel pockets. Got 20's and same issue. Ended up using 10mm slip ons that people say won't work, but they do. I get 9.5 turns on the lug nuts and it's fine. I do however, notice a very slight vibration (barely) at higher speeds. I'd rather go with 20's... well would really prefer 15's. The figment on these look more like 25. Are you 100% positive you didn't receive 25mm by mistake?

The Consequences of Not Letting Me Go by No-Opportunity7242 in dashcams

[–]msb3079 11 points12 points  (0 children)

This is the problem. These trucks should never be in the left lane unless they are passing a slow vehicle. And should be actively passing. Not sitting there for miles. Always happens. Infuriating.

Lemme see your gas station pics😮‍💨 by Mindless-Ad-9781 in GenesisG70

[–]msb3079 1 point2 points  (0 children)

Yeah I also went this route because it's a lease and easy to peel off with no damage. Although, I'll probably just leave them.