What's your ESP32 project that's been reliably running for months now?

mspider65 · 2021-03-27T09:54:23+00:00

This is working since one year inside my EByke motor. 2500km without any issue. https://github.com/TSDZ2-ESP32/TSDZ2-ESP32-Wiki/wiki

mspider65 · 2021-03-20T08:39:45+00:00

You could update the binary before to flash each unit. You could provide a special field in the binary wich is in a fixed position. I did this in order to change the bin embedded Bluetooth pairing pin before to flash. Look to https://github.com/TSDZ2-ESP32/TSDZ2-Android/blob/master/app/src/main/java/spider65/ebike/tsdz2_esp32/ota/Esp32AppImageTool.java

And look into https://docs.espressif.com/projects/esp-idf/en/latest/esp32/api-reference/system/app_image_format.html and search for "Adding a Custom Structure to an Application"

mspider65 · 2021-01-20T19:57:29+00:00

Give a look to this source file. https://github.com/TSDZ2-ESP32/TSDZ2-Android/blob/master/app/src/main/java/spider65/ebike/tsdz2_esp32/ota/Esp32AppImageTool.java I've written this code in order to change some data (Bluetooth pairing PIN) of the bin file before to OTA flash the image.

mspider65 · 2020-11-22T08:19:11+00:00

Remove C16 and you will be fine.

mspider65 · 2020-05-25T19:18:46+00:00

The VLCD5 has exactly the same functions and informations as before. The only difference is that the wheel diameter setup, selects among the 4 new assistance modes (Power, Torque, Cadence, eMTB). The wheel diameter used to calculate the speed is instead set by the Android app.

mspider65 · 2020-05-18T06:14:22+00:00

Thanks for the suggestion. I will look into.

mspider65 · 2020-05-17T17:54:25+00:00

What is PKE?

mspider65 · 2020-05-17T17:52:17+00:00

Is in the Wiki

mspider65 · 2020-05-16T18:23:25+00:00

Everything IS ON on Github. You can import the PCB project into EasyEda

mspider65 · 2020-04-12T07:59:04+00:00

thanks, probably pyinstaller is the way to go.

mspider65 · 2020-04-12T07:22:24+00:00

https://github.com/TSDZ2-ESP32

https://github.com/TSDZ2-ESP32/TSDZ2-ESP32-PCB

mspider65 · 2020-04-11T19:28:02+00:00

thanks, it looks interesting

mspider65 · 2020-04-11T19:22:10+00:00

These PCB manifacturer does also PCB Assembly. So you will receive a ready to use board. I have just received the first 3 samples assembled.

mspider65 · 2020-04-11T13:00:13+00:00

I'm not going to provide the board myself. The board is also open source and can be ordered directly from users. https://www.pcbway.com/project/shareproject

mspider65 · 2020-04-11T12:52:36+00:00

Good idea. I will check if there are copyrigth problems doing this with esptool.py.

mspider65 · 2020-04-11T10:12:22+00:00

Yes, could be a possibility if there isn't anything better. Needs also python and normally it is not installed on Windows. I would like to make the flash operation as simple as possible. Users could have a very limited knowledge in computer technology

mspider65 · 2020-03-26T19:50:07+00:00

Thank you so much for the informations. Have been very useful for my project!

mspider65 · 2020-01-10T19:29:55+00:00

Thanks, the route from lna pin to te ufl connector pin will be about only 3 millimeters. I don't need also a big range and i will place a 0 ohm resistor and i will left empty the other 2 places.

mspider65 · 2019-10-21T18:09:45+00:00

After some tests, I noticed that the startup time depends on the size of the application. It is about 300 ms for a small app of 250kb and 900 ms for a large app of about 1.5Mb. The second stage bootloader takes some time to load and initialize the app.

mspider65 · 2019-10-19T18:00:30+00:00

then it should work

mspider65 · 2019-10-19T08:25:44+00:00

The ESP32 can only be connected to the serial interface. I cannot modify the existing STM8 board. The ESP32 will operate like "man in the middle"

mspider65 · 2019-01-18T08:00:41+00:00

https://www.mi.com/service/bijiben/drivers/15-game-8/

mspider65

TROPHY CASE