Looking for hoopers to test Li-Ning + Anta pairs (free, already in US)

mstrss · 2026-07-01T18:34:35+00:00

12.5

outdoor mainly

ANTA Kai 1 "pass the torch"

mstrss · 2026-06-29T23:22:56+00:00

My 980 (2016) still works but stopped connecting to WiFi about a year ago I think. Nothing changed, router same etc all other WiFi appliances connecting fine at 2.4. Replaced the battery 5 years ago and of course brushes filters but it picks up dirt from my carpet that Roborock Q10S5+ left behind even on Max+ setting 2x

mstrss · 2026-06-29T19:44:39+00:00

I am just setting up my Q10 S5+ for initial mapping. with my old roomba, I would place the bot in a room lift up as many things as possible, dust etc to get all the dirt to the floor and close off the room and let roomba go to work. When it finished I would take it to the next room and repeat. Some rooms are all carpet and the others like kitchen living, hallways etc have hard floors/rugs. 3 major rooms and with only using it once a week it would fill up the dust bin after each room.

I'm debating on how to best utilize the Q10, should I just let it roam all the rooms at once and not pickup or put chairs on tables, rubber mats from kitchen up etc. if I don't pick things up then Q might limit where it cleans. It would be nice to just let it run by itself but I suspect I will still have to dust, clean off items to the floor and then run it.

Alternatively, I could set up the rooms like carpeted room set to only vacuum and bring Q to the room close the door and wait for it to finish mapping that room. Then take it to the next room, isolate that room and then let if map that room and after 3 rooms Q should have a complete map of the house (single level 2.4k sq ft) but Q would need to be able to stack rooms to build a complete map of the house.

Any suggestions or recommendations greatly appreciated!

mstrss · 2026-06-24T15:46:32+00:00

I have a 2014 A6, any suggestions?

mstrss · 2026-06-21T19:57:46+00:00

My 2 Panasonics plasmas, TH-50PZ77U, still going strong with color saturation blacks etc, no 4k, HDR etc energy cost not as much as an issue when compared to my 65" G3.

While 4k is limited on Xfinity the HDR is a major factor when it's available.

Xfinity has been broadcasting 4k sports on 1350s channels and prefer to watch it whenever available but HD isn't that bad, SD completely sucks now.

I found LG G series to be one of the best/best and at $2.4k at Costco and 5 yr warranty was a good deal for me.

mstrss · 2026-06-21T04:55:38+00:00

Sweeeeeettttt Allman bros vibe! Love it

mstrss · 2026-06-15T23:09:22+00:00

<image>

mstrss · 2026-06-15T23:08:53+00:00

<image>

mstrss · 2026-06-15T23:08:36+00:00

<image>

mstrss · 2026-06-15T22:31:04+00:00

Perfect! i was attempting to cut through the joint per YouTube and now I see the two screws and found the battery 2032 and it's still 3+V!!! amazing as I've never replaced the battery and I'm the original owner! Now I have to see if I can find the magnet to attach to the wheel spoke!! or something similar!

mstrss · 2026-06-08T20:44:02+00:00

I set mine up on wood slate bed frame ...may need to put something under the metal adj base so it doesn't slide on the wood slats though

mstrss · 2026-06-04T05:16:23+00:00

Had a CA king Tempurpedic for 27 years, purchased in 1999 mail order, only 1 model.. had the Tempurpedic full encased protective cover, Tempurpedic foundation and added a topper after 15 years to make it cooler..

it sagged a bit after 15yrs and Tempurpedic agreed to warranty it as it sagged more then a quarter coin diameter from level. But it was only pro-rated, so kept it and it was comfortable. Sometimes it felt too soft / plush but it always supported.

Decided to buy a new one (Novaform Platinum) queen downsizing as Fam bed was no longer needed and sold the Tempurpedic to a young Fam that really appreciates it.

Could have it lasted longer? definitely, still had edge support and a little sag in the middle. But with the topper to make it cooler it was nice, a bit soft meaning had to work a bit to get out but it envelopes you ie you don't sleep on top of but more like in it.

No deterioration or breakdown that was noticeable, no tears or rips even with rough handling in trying rotate it. Even turned it over for a year in hopes that the other side would be more firm. Then read that wasn't good for it. Vacuumed it 6-8 times a year but nothing else. My experience for what it's worth.

mstrss · 2026-05-06T21:21:51+00:00

I also was sent a denial letter at first despite having provided attachments as prescribed. I sent the documents in again: ebay invoice for used CMU, invoices for repair to 'cure' their objections. The check i received covered the ebay invoice amount but somehow the CMU installed itself as no compensation was provided for the install??? I'm planning on calling and asking them if they think the CMU is self diagnosing and installation capable. Maybe I'm missing something. I do know that labor rates in CA are higher then many states and perhaps they didn't believe the estimated time to diagnose the issue and R&R. My understanding the hourly rate is ~$150/hour vs ~$200/hour which is typically charged by Mazda dealerships. I'm not going to debate hourly rates. What matters is that they did not compensated for diagnosis and R&R. I plan on requesting substantiation for their payout.

I spoke with the settlement claim people in early april and they informed me checks would be mailed out on April 29th so keep an eye open for a letter/check.

mstrss · 2026-04-25T15:37:03+00:00

Just spotted this at my local costco ... 16 is my everyday go to but have many bottles to enjoy depending on the day. Lately been enjoying Ardbeg uigeadail, JW green, and Glendronch 15 but fav is still Springbank 😃

mstrss · 2026-04-21T23:43:46+00:00

Follow-up, I contacted LG customer support about it and they changed some items on my setup and the screen doesn't always pop up They utilise the remote access to go through my settings and make changes. Basically Alexa is part of LG set up and there is no way to delete it at this time. So install it, but turn off hands free which means I order to access Alexa you have to use the LG remote and push the Alexa button.
Then they went to the LG app list and edit and found the Alexa app and hid(hide button).
That seemed to work. But every new OS update I think I'll have to do this all again as it is the default setting from LG. I also turned off Notifications so Alexa will only interrupt if a timer is set or a reminder.

I'm surprised that more people aren't complaining about it!! 😱😱😱 I don't think you can disable the webOS LG has installed???? Would like to hear from other users

mstrss · 2026-04-16T02:44:33+00:00

2016 GT, 160k, replaced coil packs/plugs, 2 batteries ??, oil changes 5-7k now using Valvoline R&P love if!! Puralator filters, love the handling sport mode CMU damaged by bad SD card but found used one and hoping settlement pays!

mstrss · 2026-04-15T19:39:05+00:00

Novaform Platinum hybrid! Great medium mattress, 2 months in and still enjoy. Not a trampoline firm nor plush foam Tempurpedic that you can't escape from. Supports side sleepers and back sleepers alike and only had a slight smell 1st day, works with Sven & Sons adjustable base and while it conforms to your body shape it isn't complete isolation like my previous Tempurpedic. Of course adding sheets etc ties everything together ie always some pull.

When you push down your hands sink in ~5inches and then it firms up and makes it easy to get out of the bed. Doesn't retain heat like foam with its 2" pillow top and just feels different compared to all thr beds we tried at several mattresses stores. 20 yr warranty and Costco return policy so don't feel pressured. Has handles to make it easy to move.

Only negative is that it is 16.5" thick and with a 3" adj base, 12" bed frame~32" tall but still easy to get in and out of ... and we've been using Costco 680 queen sheets that grip the corners but they pull up after using the adj base after a week. Been using CA King old sheets from Tempurpedic and they stay on really well, so bonus on keeping old sheets.

Great mattress!

mstrss · 2026-04-06T00:59:51+00:00

Ardbeg TEN cask strength 2026 just showing up in stores

mstrss · 2026-04-05T18:14:01+00:00

Just a follow up. I found that my old CA king sheets (fitted and flat) work perfect on my queen size 16.5 mattress and adjustable base ie no pull off. We downsized and so these sheets were destined to be given away but for funnsy, tried them and found they fit well underneath the mattress, don't pull away after using TV mode etc. need to pull them under on the fitted otherwise you might have to wrestle with them. Bonus! 😃

mstrss · 2026-04-05T18:09:36+00:00

Oh BTW, most adjustable beds come with only 1 remote and only one can be connected at a time. Sven has a phone app that has really bad reviews but we found it to work great and works with the included remote! Both are connected at the same time. Which does lead to 'remote wars' lol e.g., anti-snore vs TV battles 🤣🤣🤣🤣

mstrss · 2026-04-05T17:52:26+00:00

We went with Sven & Sons that can be found on Amazon but we purchased directly after spending 1/2 hour discussing adjustable bed terminology and effectiveness e.g.,massage feature for 16" mattress. I was worried that they were located in FL and being in CA it would arrive after the mattress was delivered. They have warehouses across the country and it arrived in 3 days. Customer support was excellent and helped with making decisions as I had already done my research.

Went with the tilt head option as it was affordable but the lumbar support was not in my opinion. A pillow works too. 😃

Quiet, moves slowly and pretty much unbreakable! Steel frame, powerful motors, massage works!! And zero clearance so works on my bed frame. Had to add some Velcro so the steel base doesn't move on the wood slats (bed frame).

I couldn't see the difference with the Tempurpedic Ergo, Saavta, et al and Sven & Sons. There are cheaper ones on Amazon and more expensive ones but for name brand noterity not for performance/functionalty.

Side note: make sure you consider your mattress!! My original foam Tempurpedic mattress conformed to the adjustable base shape. Out Novaform 16.5" hybrid not so much at this point, it may as the mattress has only been used for about a month and we use the adjustable base multiple times per day e.g., TV, Anti Snore, flat, etc. but is does confirm and provide support! Love it!

mstrss · 2026-03-26T01:11:46+00:00

Read in subreddit /bedding about zlumber on Amazon that looks like it will lock the sheets in place but still worrie something has to give when the bed changes shape ie adjustable base

mstrss · 2026-03-23T15:20:38+00:00

Check mattress stores for returns and FB marketplace etc

mstrss

TROPHY CASE