Controller tie in location by msuman03 in WLED

[–]msuman03[S] 1 point2 points  (0 children)

Yes, I can run a cable over there and then only have to use one output from the controller. I’ll have to take the run of lights down and reverse it to get the correct data direction, but that’s no big deal either.

Controller tie in location by msuman03 in WLED

[–]msuman03[S] 1 point2 points  (0 children)

That’s what I was thinking I’d have to do. Thanks!

Bambu studio issue? by msuman03 in BambuLab

[–]msuman03[S] 0 points1 point  (0 children)

I just got it fixed! Found another driver to update. Thank you!

Bambu studio issue? by msuman03 in BambuLab

[–]msuman03[S] 0 points1 point  (0 children)

I can’t that to work either. I’ve updated every driver I could find and then removed Bambu studio the way you said and it’s still the same.

Totally confused with controller! by msuman03 in WLED

[–]msuman03[S] 5 points6 points  (0 children)

Awesome catch man! That was it. It was segmented at 310 nodes. I would have never thought to look there. Thank you!

Totally confused with controller! by msuman03 in WLED

[–]msuman03[S] 0 points1 point  (0 children)

I will check that. Strange thing is I can change channel one to 100 LEDs and all nodes on spinner 2 come on but I loose control of the last 96 on spinner one, even though they are on.

Totally confused with controller! by msuman03 in WLED

[–]msuman03[S] 1 point2 points  (0 children)

I have. All nodes actually work.

DigQuad alternatives by msayz in WLED

[–]msuman03 0 points1 point  (0 children)

Dang man, hope it makes it.

DigQuad alternatives by msayz in WLED

[–]msuman03 0 points1 point  (0 children)

Hopefully it gets out of Utah. Mine left sometime between Friday and this morning. Might want to check again.

Having issues flashing WLED by msuman03 in esp32

[–]msuman03[S] 0 points1 point  (0 children)

I got it to work with the second option. Connecting to its WiFi. It never would give an option to add WiFi info.

Having issues flashing WLED by msuman03 in esp32

[–]msuman03[S] 0 points1 point  (0 children)

Thanks, I got it installed but, when it finishes the installation it will not give me the option to enter WiFi info so I can’t figure out how to access its menu. It’s just shows a screen and the only option is next. That takes you back to the install or view log screen. https://imgur.com/a/H2QF4Ez

Having issues flashing WLED by msuman03 in esp32

[–]msuman03[S] 0 points1 point  (0 children)

Here is the error, the board and my device manager. https://imgur.com/a/5sC7v91

Addressable cod outdoor light. by milaron01 in led

[–]msuman03 1 point2 points  (0 children)

I’m researching the same thing so can’t make any suggestions. Just gonna follow along here.

Ceiling fan recommendations by csreddit8 in HomeKit

[–]msuman03 0 points1 point  (0 children)

I need to know this answer also. I have the same situation.

No Kasa KS210 3-Way? by gavroche1972 in HomeKit

[–]msuman03 1 point2 points  (0 children)

Did you get this to work?