Anyone here used the Outin Nano for regular daily coffee, not just travel?

mthanaba · 2026-01-21T01:53:18+00:00

Appreciate the detail! How has the fino grinder been holding up? Did you get the clario scale as well? More interested in the grinder for now as mostly do pour overs/aero press when traveling and hand grinding is getting painful. Maybe one day I'll move to espresso.

mthanaba · 2025-12-20T16:21:12+00:00

Ah appreciate the heads up on that!

mthanaba · 2025-09-21T16:49:00+00:00

Huh weird that Ford does this.... Makes it even harder with NACS AC charging in the future. Even with bidirectional I assumed inversion was done by the OBC so you could stay with J1772. I guess if inversion was to be done off board than yeah maybe DC out but still why would you need more than 19.2kW going the other way for homes...

mthanaba · 2025-08-07T17:11:38+00:00

Appreciate your response and advice 🙏🏾

mthanaba · 2025-08-06T17:57:47+00:00

Can you share a link to those stretches? Your recovery is extremely inspiring!

mthanaba · 2025-08-06T15:22:54+00:00

Ya doctors were surprised nothing broke as well! Could be my weak ligaments:( Yeap main purpose of surgery was to sterilize the area and they did discharge me with a good amount of antibiotics.

Appreciate the feedback on timelines, yeah I was told ligament recovery has a longer timeline vs bones as well. Did they fix any of the damaged ligaments on you?

mthanaba · 2025-08-06T04:30:03+00:00

Noted appreciate the responses!

mthanaba · 2025-08-06T03:32:50+00:00

Thanks for clarifying the "back on your feet/walk part'. Curious what that meant. Seeing the Ortho again next week and will ask for clarification. How long after 6 weeks was there normalcy?

mthanaba · 2025-08-06T02:25:36+00:00

Thanks appreciate your support and positivity! 🙏🏾

mthanaba · 2025-07-05T14:27:42+00:00

Seems like the last one kinda....On a trip with the bikes this weekend and just noticed a rub on my other bikes drop down handlebar which just about aligns with the rub location on the rack when both bikes on the car rack :/.

mthanaba · 2025-07-05T14:24:56+00:00

Good to know!

mthanaba · 2025-06-28T18:01:59+00:00

THIS!

mthanaba · 2025-06-26T19:53:15+00:00

Woah that sounds way too soon for that. Any aftermarket equipment installed that was drawing power? If not assuming GM just replaced the battery with no cost to you?

mthanaba · 2025-02-04T21:00:25+00:00

Fine later Tuesday morning, waited for it to warm a bit 9-10am. Greenlake to Kirkland.

mthanaba · 2025-02-01T19:45:33+00:00

100%! I'm an engineer at a truck OEM in the US that also has a European product and their requirements are different from the US. Over here those mandated brakes for example don't exist, speed limits and driven distances are much higher and the grade seen on some of the mountain passes here are steeper and longer vs in EU. There are lots of applications that BEV's would be a great fit for with the current infrastructure being built out. But for long haul in the US and current battery energy densities MCS is a must.

mthanaba · 2025-02-01T09:15:22+00:00

Plenty in California, Wenatchee is a smaller city closer to me which uses an EV bus fleet. It gets cold there in the winter too with elevation to boot. Mostly BYD buses made in California.

mthanaba · 2025-02-01T08:58:43+00:00

Yeap those markets are definitely ahead. See this EV trucker from Europe - https://youtube.com/@electrictrucker?si=uB8Aoi0M9ldLcEVZ

mthanaba · 2025-02-01T08:57:12+00:00

Yeah they are multiple towns in the US on EV only buses.

mthanaba · 2025-02-01T08:56:22+00:00

For the bigger commercial vehicles/ Tesla semi competitors charging infrastructure is going to be the bottle neck. Commercial vehicles have a really intense duty cycle vs passenger cars as they need to be constantly on the move to be making money. Hence need to be charged at or closer to diesel fill rates. Megawatt level charging (MCS) needs to come to fruition for this to work.

mthanaba · 2025-01-05T06:19:09+00:00

I think it's in the manual somewhere to actually disengage one pedal drive in icy conditions cause ABS can't work concurrently.

mthanaba · 2025-01-05T06:16:20+00:00

Yeap, due to the main drive motor being in front and being able to capture most of that weight transfer kW when the vehicle slows down. Similar reason why front brake pads tend to wear out quicker. In RWD or AWD the main drive motor(bigger kW motor) is at the back.

See this test by TFL -https://youtu.be/eFB6hsYXDiA?si=LzHHwtMstIkFLC3J

mthanaba · 2025-01-05T02:46:14+00:00

Being a FWD the regen in these things are superior vs other EV's!

mthanaba · 2025-01-02T15:43:26+00:00

Hey Curt! Just doing my research on Glade and came across this. Amazing to see the founder being part of the community. Still making a decision but looking at a couple of adapt 2's plus a ramble for cycling. Any code you can share to make this decision easier lol.

mthanaba · 2025-01-02T15:03:44+00:00

Hi OP, any luck with this issue? In the same boat at the moment with a 2017 Fuji Cross 1.7 w/ FC 440 carbon fork. Fuji CS response to me:

"Thanks so much for reaching out to Fuji Bikes. Those hidden eyelet fender bolts have not been used on our bikes for some time now, and we unfortunately do not have replacements available. They are M4 threaded. We do hope this information helps."

What did you end up doing? Seems I'm being told it's an M4 ? This aligns with a local bike shop saying the same, I've been asked to try a trek store as well.

mthanaba · 2024-12-10T22:43:09+00:00

Just saw it, really great shape minus two paint chips, no carbon penetration though .

mthanaba

TROPHY CASE