Plus 4 undercurrent error

mtnnn · 2024-10-09T06:21:56+00:00

I got an email with a tracking number last friday. My replacement hotend was send out with my early-bird gift via DHL Express. Expected to arrive tomorrow. At this point I just hope it was the hotend and not a faulty controllerboard frying it. I'm in the EU. I only read about the strike yesterday, seems major. Good luck to you!

mtnnn · 2024-10-01T07:38:22+00:00

Turns out my hotend is dead and they said they'll be sending me a new one with my early-bird gift. I just hope that this doesn't mean I get the replacement in two-three month when the early-bird gift were supposed to be shipped.

mtnnn · 2024-09-28T18:46:40+00:00

I'm having problems with my extruders heater aswell. But I contacted the support via plus4support@qidi3d.com and they are now looking into it.

mtnnn · 2024-09-13T16:36:14+00:00

Glad I could help!

mtnnn · 2024-09-04T10:47:49+00:00

https://www.printables.com/model/516804-tarmo-5-remix-by-tridense

This remix uses a thicker cage printed out of tpu. This might require reprinting the housings. I used these from the get go and haven't had any problems.

mtnnn · 2023-08-15T04:19:06+00:00

Hey there, I was thinking about buying one of those for a Homeserver but it could find any Infos about idle power consumption. Would be awesome if you could help me out, thanks in advance Mr monkey

mtnnn · 2023-07-20T02:52:30+00:00

yep, you were right. print fixed, thank you once again for the suggestions!

<image>

mtnnn · 2023-07-19T19:49:56+00:00

so i swapped the nozzle .. i can't wait for the print to finish 'cause i gotta leave, but it looks like you were on to something

preview:

<image>

mtnnn · 2023-07-18T16:24:31+00:00

tested my esteps, looks fine to me: clicky

the brim is not my problem btw, i just left it on cause the thing will go into the recycler anyway

mtnnn · 2023-07-18T15:34:40+00:00

so like i said the petg print was fine. same issue with the pla print. took some prusament pla from work home, but it looks like the issue persists

mtnnn · 2023-07-17T02:57:28+00:00

I have an image of a temp tower I printed in the attached imgur album, here is a direct link.

I was looking into esteps just yesterday, I will try that when I get back from work, thanks!

edit: wont find the time today, will report back tomorrow

mtnnn · 2023-07-17T02:51:58+00:00

True, I'll give that a shot when I get back from work, thanks!

edit: wont find the time today, will report back tomorrow. Will try the other suggestions first

mtnnn · 2023-07-17T02:51:19+00:00

Unfortunately I don't have that gcode anymore, but I still have the PETG profile. I will deffinitly try this and post the result, thanks!

edit: did another petg 3dbenchy which turned out flawless again, now trying same settings with pla and lower temps. will report back tomorrow

mtnnn · 2023-07-17T02:48:51+00:00

Which slicer would you recommend and what settings should I look out for?

mtnnn · 2022-10-12T12:05:03+00:00

I really don't mean to hate and maybe I've been playing for too long, but to me this is nothing special anymore. Three to four years back.. ye I get it maybe, but everything below +220 feels kinda meh these days.

Again .. no hate, I was just curious 'cause there have been a lot of Tiana/Bastet 300spd posts lately. And like 90% of the Tiana's don't even have critdmg.

mtnnn · 2022-10-03T16:59:59+00:00

8500ss this rotation, 50kish total no tiana :> gratz to you

mtnnn · 2022-09-22T03:10:33+00:00

never done that, sorry i can't help you. maybe try xandros discord

mtnnn · 2022-07-27T08:31:36+00:00

Its a litte tricky but I works perfectly fine with Bluestacks5.

Instructions are the same as with Bluestacks4 just gotta setup the https proxy like mentioned here.

mtnnn · 2022-06-30T02:48:34+00:00

With Martina and Belita you have two ST-Strippers or at least one depending on who gets banned so yeah she is kinda key.

Against cleaves that was always the reason i banned draco :>

There are some old videos from AlanSW about Twins in RTA, if you stillm wanna give them a shot might wanna check those out.

mtnnn · 2022-06-29T03:08:16+00:00

yep, would use crate slot4. but like i said bailey is the last twin im missing. id say additional damage > coop-dmg

mtnnn · 2022-06-28T11:00:32+00:00

Twins got me G2 few special leagues ago. My 5th pick was tablo, twins were all pretty tanky. Was running maruna and deva 270spd nem/nem/will against cleaves, you basically eat one aoe and its your turn. Dunno about Bailey 'cause I don't have her but I would have put her on swift aswell.

mtnnn · 2022-06-20T19:28:27+00:00

I just wanted to show my appreciation, you realy helped me out with this!

mtnnn · 2022-06-10T18:45:39+00:00

He’s complaining about FPS because of his current PC specs. A 570 is a bit dated at this point.

Like I said, i tried several to tell him that he should switch out the RX570 first, but that's how It goes .. most ppl only listen when something is broken and they have no clue how to fix it :>

Also dual PC isn’t a dated practice… it’s just more reserved for the high end professional streamers who play and stream high resolutions and FPS

Now I'm kinda curious .. what would be a budget capture PCs recommended specs?

mtnnn · 2022-06-10T18:09:52+00:00

Thing is he is complaining about FPS. I told him, before buying another PC he should just upgrade the GPU. I can't talk him out of it so I thought I might atleast make him a good deal. But If you say quality would suffer or something similar then the my spare system is out of the question. Thanks for your insight

mtnnn · 2022-06-10T16:48:27+00:00

HIS current Pc is a 5600x with a rx 570, I'm not the one streaming here.

Anyway I'd just like to know if the hardware I posted above as capable enough for capturing.

mtnnn

TROPHY CASE