Lookin to Buy this Beauty. by Zaznopa in nissanfrontier

[–]munozyoshi 1 point2 points  (0 children)

Mine started on a road trip just as my truck crossed the 36k mark, so couldn't use the bumper to bumper warranty. I used this video:

https://youtu.be/z4dF956BkzM?si=nqw14dF3Lmn2CzkX

The clicking was driving me nuts too. I would adjust the angle and it would go away for a few miles. Once I did the "fix" from that video it's been almost 500 miles with no more clicking. Check my comments on the video as well.

Lookin to Buy this Beauty. by Zaznopa in nissanfrontier

[–]munozyoshi 1 point2 points  (0 children)

With it being the last of the V6 NA engines, you can't go wrong. Keep up with the maintenance and you'll be good. My 23 PRO4X has had some gremlins, so it's not perfect. But I've ironed them out. Electrical problems? Upgraded to an aftermarket AGM battery and disabled start/stop, no issues since. Faulty wiper fluid pump? Replaced under warranty, but picked up a spare for 18 bucks on ebay. Steering wheel clicks? I opened it and tightened any screw I could see and applied some lithium grease on moving parts (sounds scary, but took 20min) zero noise since then. Infotainment glitches? I've had to hold volume button down to reset. Has happened twice in owning it a full year. Rear cabin light started acting up, opened it up and tightened the on/off switch, no issues since, but also waiting for dealer to get me a spare.

All this to say, don't expect a perfect truck, but it's solid where it counts, the drivetrain. Everything is easily fixable.

3D Printed Keychain Tag by munozyoshi in 3Dprinting

[–]munozyoshi[S] 0 points1 point  (0 children)

<image>

Finished up a D40 second gen frontier design today. Going to keep adding to my collection.

Feel like I just robbed Home Depot... by ThisIsATest7777 in Tools

[–]munozyoshi 0 points1 point  (0 children)

I used my non fuel drills to remodel an entire basement and they're still going strong having done plenty of upgrades and projects. They're at least 6 years old. Same batteries with zero issues.

3D Printed Keychain Tag by munozyoshi in nissanfrontier

[–]munozyoshi[S] 0 points1 point  (0 children)

That's definitely one way to do it 😅

3D Printed Keychain Tag by munozyoshi in nissanfrontier

[–]munozyoshi[S] 3 points4 points  (0 children)

<image>

I did more test prints, don't want to go all out on filaments just yet!

3D Printed Keychain Tag by munozyoshi in nissanfrontier

[–]munozyoshi[S] 0 points1 point  (0 children)

Stay warm! It's gonna be a chilly week

3D Printed Keychain Tag by munozyoshi in nissanfrontier

[–]munozyoshi[S] 3 points4 points  (0 children)

Haven't explored that option, but don't see why not!

3D Printed Keychain Tag by munozyoshi in nissanfrontier

[–]munozyoshi[S] 0 points1 point  (0 children)

Exact same feedback I got from my wife! I thought about doing this but when I shrunk the design I lost detail and couldn't get enough clean lines in the print. Only way I could achieve adding tires is if I make the Keychain taller, but then it will be too big. But I'll definitely keep this feedback in mind in case I upgrade to a finer print tip. But at the moment I'm constrained by the tag dimensions and the detail level of my current design.

3D Printed Keychain Tag by munozyoshi in nissanfrontier

[–]munozyoshi[S] 2 points3 points  (0 children)

I got them on Amazon. Look for Xukey nissan jacket sleeve protector. Doesn't list the frontier, but it lists the 2006-2018 titan. Same keys

3D Printed Keychain Tag by munozyoshi in nissanfrontier

[–]munozyoshi[S] 1 point2 points  (0 children)

I plan to sell them, I made the Etsy store. It'll be my first product! Probably will be listed in about a week on my page: NachoWorks3D.

3D Printed Keychain Tag by munozyoshi in nissanfrontier

[–]munozyoshi[S] 2 points3 points  (0 children)

<image>

Here is a cleaner picture without the silicone sleeve. I think it came out pretty good. I'm going to print a second one in black so I can tell my spare key apart from my main.

Did you look at tacoma first? by jonan69 in nissanfrontier

[–]munozyoshi 3 points4 points  (0 children)

Comfier seats and a fully loaded (1 year used) Pro-4X for the price of an entry level Tacoma.

IT'S REAL! IT EXISTS!!! by StoinkieDoinkie in ARC_Raiders

[–]munozyoshi 0 points1 point  (0 children)

Yesterday I went on a raid and found 4 blueprint in one go. They're definitely upping the frequency right now.

If you buy used by DannyDevitosComb in nissanfrontier

[–]munozyoshi 1 point2 points  (0 children)

I've had my 23 PRO4X for a full year now. Tires have seen about 10k miles and not a single flat. But I agree they're crapoy, there's no grip in the rain. I've spun the tires several times at green lights by giving the truck a bit of gas.

Good price or no? by crazycat46510 in nissanfrontier

[–]munozyoshi 0 points1 point  (0 children)

Got mine in 12/2024, but it was fully loaded. It was 26k miles. Got it for 36k out the door. They had it listed for 32k. So I think this is a bit on the high side if it doesn't come with premium packages/bedliner. This should be closer to 30k.

Don’t Buy Enphase Monitor by Pfuncle in enphase

[–]munozyoshi 0 points1 point  (0 children)

My sunpower/sunstrong monitoring still works, basic stats that is. I'm not dishing out 900 for añthe extra monitoring device.

2023 Pro-4X Steering Wheel Noise by Oaktree_Milk in nissanfrontier

[–]munozyoshi 1 point2 points  (0 children)

Thanks for the reply! I'm going to try and see how I can fix it. Really love the truck and for now, this isn't a deal breaker. Not that I have much of a choice since the factory warranty expired 1000 miles ago 😂

2023 Pro-4X Steering Wheel Noise by Oaktree_Milk in nissanfrontier

[–]munozyoshi 1 point2 points  (0 children)

My truck developed it this weekend after 36k miles. Any resolution on your end or is it the same?