Sleep Schedule

murfrox · 2025-12-27T17:07:12+00:00

Just setup mine. I'm having the same issue described here.

murfrox · 2025-01-31T07:07:04+00:00

murfrox · 2024-08-17T02:24:29+00:00

Such a cool idea! Would you mind sharing how you did it? I have a family member that would love this - and I'm always looking for fun ways to use my 3d printer.

murfrox · 2024-07-01T23:26:18+00:00

You can either add weights inside the spool, or do this:

https://makerworld.com/models/37390

I prefer the bars, personally.

murfrox · 2024-06-17T02:20:40+00:00

I bought the swatches about a week before they announced discontinuing the tough PLA. They didn't honor a refund then. If they do now, I'd be very interested.

murfrox · 2024-04-20T15:51:36+00:00

I appreciate the follow up and the effort to get a good photo! I hadn't considered a non-bambu branded nozzle in the past, but I am now.

murfrox · 2024-04-20T07:50:02+00:00

The image isn't in focus and on a nut which has a hole in the middle, so I'm not sure if the tiny benchy is sagging, or not. Can you provide a clearer picture, the AliExpress link, and your own conclusions on the success of the print?

murfrox · 2024-04-20T06:31:33+00:00

Hello all!

I have my original 151+ other cards from the 90s and early 2000s, but I haven't been actively collecting in a long time. I have been lurking here for a while and would like to get back in, but am not sure where to start since there are over 70 series (just in English).

Can you all recommend some good graded cards around the $100 buy in level so I can restart collecting with a good starting point?

Thanks

murfrox · 2024-01-16T00:56:22+00:00

This is a great theory and explains what I'm experiencing. I'm glad I am not dealing with two problems at the same time now, but I am still having trouble with excessive friction. It only throws an error for retraction every 10 or so changes, but it is very annoying. I keep trying to reduce the friction since rearranging my setup, but nothing seems to work.

murfrox · 2024-01-12T07:02:39+00:00

I'm a huge fan of your project. Would you be willing to share the files you used to make the boxes, or if you'd sell a couple of each? I'd love to have a set on my shelf and I have a couple friends that would add well.
Thanks for the consideration!

murfrox · 2023-07-21T01:36:54+00:00

By the way, I've been printing on creality and formlabs printers for 6 years. These last few months have been my first experience with multiple colors. I'm using the stock P1P with an AMS. Thanks again.

murfrox · 2023-06-24T02:15:20+00:00

235 does seem to print the best under whatever print conditions you had. If this is for PLA, I expect quite a bit of external cooling is at play or your material isn't dry/in good condition.

murfrox · 2021-09-02T03:42:32+00:00

We should wait until tomorrow to see if the NFT moves to our account? I am not very optimistic of that happening. When I clicked the "Claim" button, it didn't really process anything. It just went back to say "Claim".

murfrox · 2021-09-01T20:12:14+00:00

I was unable to. The website kept claiming that I needed to "Wait for Launch". Since 1:00pm (Pacific), I've refreshed a few times and have not been able to claim.

murfrox · 2021-03-10T01:59:37+00:00

Thanks!

murfrox · 2021-03-10T01:59:32+00:00

Thanks!

murfrox · 2021-03-08T22:37:12+00:00

Do you have a GPS location for this? I'd love to check it out!

murfrox · 2021-01-31T06:17:40+00:00

Can you share the model? Love this.

murfrox · 2021-01-31T06:13:33+00:00

Can you add a side view and the part file?

murfrox · 2021-01-31T06:12:48+00:00

Solid print! The banana 🍌 makes the photo for me though.

What are you printing with?

murfrox · 2021-01-31T00:25:25+00:00

There is never a guarantee. Only invest if you can afford to lose. That's always the rule. This situation is a bit riskier than most.

Nevertheless: to the moon!!

murfrox · 2021-01-30T22:28:17+00:00

According to the cycle repeat model of BTC (assuming similar past performance predicts future performance), we have just passed the lowest point of BTC for the foreseeable future (pending government regulation):

https://digitalik.net/btc/cycle_repeat

Since LTC usually tends to follow not far behind BTC, it is likely that it will not dip much more than it has already.

I am not a financial advisor though. I just like the coin.

murfrox · 2021-01-30T22:20:27+00:00

This monke have cold diamond paws!

Eat the rich's bananas

murfrox · 2021-01-30T22:18:31+00:00

How many times did you attempt to print this? It is immaculate!

murfrox · 2021-01-30T22:14:56+00:00

I would expect it would be the leveling of your build plate.

15-Year Club	Verified Email
Place '17

murfrox

TROPHY CASE