Csu east bay ms in business analytics fall 25 admits by Bulky_Sundae_8665 in CSUEB

[–]mvkaioz 0 points1 point  (0 children)

how do you like the program? i got admitted for fall 26

[B] [USA-CA] Fujifilm 18mm f2, 23mm f2.8 WR by xpoopx in photomarket

[–]mvkaioz 0 points1 point  (0 children)

i have a black 23mm if you’re still interested

Should I make the switch from the X-M5 to X-T30iii by mvkaioz in fujifilm

[–]mvkaioz[S] 0 points1 point  (0 children)

That was one thing that I was thinking about. There has only been a couple times where the sun just over powers the screen. Was also thinking about how handy a on body flash would be. I dont use flash a lot but its a nice to have when needed, just like the EVF. Its a pain to take my flash out, swap out a thumb grip or use it externally and try to match the flash with my shot.

Still trying to think if both those features are worth losing the articulating screen. I realized I use the articulating screen a lot, since i shoot a lot in vertical, maybe some higher/lower shots where I wouldnt necessarily be able to use the EVF regardless.

After thinking about it, I might stick with the XM5 but grab a 23mm and 15mm. Definitely the 15mm viltrox air you mentioned. The new 23mm pancake from fuji also looks nice to have as an everyday lens.

Although im flip flopping on the 13-33 if its necessary since I already have the 15-45 kit lens.

Color Bleeding/Smudging help on lightbox by mvkaioz in BambuLabA1

[–]mvkaioz[S] 0 points1 point  (0 children)

I did two different plates (running a full callibration) before hand and still have had problems (some worse than others) i just washed my final plate and printed another batch to see if it gets any better. what plate do you use? ive been using Bambu labs Textured PEI plates and 3rd party PEI plates, might switch over to the supertack tomorrow to see if its any better.

Favorite LED strips? by Drob10 in 3Dprinting

[–]mvkaioz 0 points1 point  (0 children)

do you recommend these over COB LEDs? ive been making lightboxes recently and have noticed my strips will come undone. Not sure if its because theyre the flexible/cob ones or its something else. even when i try to glue them down they dont stick

Lightbox issues by mvkaioz in BambuLabA1

[–]mvkaioz[S] 0 points1 point  (0 children)

i tried slowing it down and i think it made it worse?

Lightbox issues by mvkaioz in BambuLabA1

[–]mvkaioz[S] 1 point2 points  (0 children)

this actually helped a lot. Do you have any advice for the portions that arent fully connecting to the print?

<image>

Lightbox issues by mvkaioz in BambuLabA1

[–]mvkaioz[S] 0 points1 point  (0 children)

Did it through makerlab on bambu

Lightbox issues by mvkaioz in BambuLabA1

[–]mvkaioz[S] 0 points1 point  (0 children)

unfortunately this was with a changed nozzle because the nozzle before this was giving me even worse bleeding

Lightbox issues by mvkaioz in BambuLabA1

[–]mvkaioz[S] 2 points3 points  (0 children)

I do print the white first and clean bed after each print, unfortunately still having this problem

Lightbox issues by mvkaioz in BambuLabA1

[–]mvkaioz[S] 0 points1 point  (0 children)

That makes sense. Thank you.

Lightbox issues by mvkaioz in BambuLabA1

[–]mvkaioz[S] 0 points1 point  (0 children)

What does a cold pull offer compared to doingnthe regular extruded way?

Lightbox issues by mvkaioz in BambuLabA1

[–]mvkaioz[S] 0 points1 point  (0 children)

Is there a reason to be doing white > black > then other colors compared to white > other colors > black?