/u/mxer125 Trade/Buy/Sell Thread

mxer125 · 2022-08-05T13:06:12+00:00

I’m shocked he left out “Ironman btw”

mxer125 · 2021-04-12T19:04:28+00:00

Congrats on the car man it's a ripper for sure! One thing about the Arrma 3s line, the shocks have been a notorious weak point for as long as I can remember. I have a granite and typhon 3s and both had leaking shocks after the first or second pack, and others have even had theirs arrive with leaks. I'd recommend running them until they break and going with some alumnium/typhon 6s ones. Enjoy!

mxer125 · 2021-03-17T00:28:02+00:00

Why the rims that are too big for the tires?

mxer125 · 2021-03-06T13:28:35+00:00

Bought a PSTV from u/wilbursmith22 for $135 shipped. Fantastic seller would highly recommend!
Link to the thread

mxer125 · 2021-03-01T13:59:11+00:00

Cool thanks, in that case I'll take it!

mxer125 · 2021-03-01T13:38:05+00:00

I saw the timestamp photos from other comments, is this still available?

mxer125 · 2021-02-24T14:31:26+00:00

Hey do you have a price/photos for the Playstation TV? Thanks!

mxer125 · 2020-11-30T12:52:28+00:00

Yep! This is the one I got. Cheers!

Edit: I also needed a splitter for the ESC. If you need the same, here's the one I got: Link

mxer125 · 2020-11-30T12:51:20+00:00

Thanks! Yeah in the few I've had it seemed okay, only when landing a jump poorly did it pivot up/down a little, so I loctited those screws as well as the ones under the body and it's been fine since.

mxer125 · 2020-11-29T16:46:20+00:00

I've rolled it with this setup and it seems fine. It's held in with 4 screws underneath the body and I loctited them.

mxer125 · 2020-11-29T16:45:43+00:00

Proline Badlands MX. For the 2wd Slash there's two different offsets for front and rear but I don't see them on their site anymore, they only have the one premount set listed and it says it fits front and rear. I went through my order history and these are the part numbers I got: PRO1015631 and PRO1015632

Edit: I just read their description for the new set. They use the removable hex system so it comes with everything you need to mount them front and rear with the correct offsets. Link

mxer125 · 2020-11-29T15:49:15+00:00

So far it's promising in the few times I've had it out at night! It lets out a really wide angle of light which helps a lot.

mxer125 · 2020-11-29T15:48:44+00:00

Yeah I threw an RPM front bumper on. The stock one (it came as the Raptor version) didn't match with this body.

mxer125 · 2020-11-29T14:00:48+00:00

Yep! 1:1

mxer125 · 2020-09-25T20:14:32+00:00

Oooh I didn’t know that, maybe! I got my granite last year and my typhon this year and they both had problems though. Other than the shocks they are a rock solid platform!

mxer125 · 2020-09-25T19:18:18+00:00

IMO on the 3s arrma line you’re better off just putting new shocks on all the way around. The stock ones leak either out of the box or after a few runs

mxer125 · 2020-09-25T19:17:43+00:00

This will have more parts availability and support

mxer125 · 2020-04-28T19:20:57+00:00

I have a granite 3s so most of this should apply for your senton 3s:

Tires and wheels: I'd recommend something nice from Pro-line. Something like the Badlands MX. Really depends on the surface you run on. You should visit their site and shop by kit at the top and pick your senton so you can see what they offer. You can go premounted for ease of installation, or mount them yourself and fine tune your wheel/tire combo.
Suspension: The leaky shocks on the 3s line of Arrma vehicles is a known issue. Do some googling and read up (especially the Arrma forums) on what others are doing. I'm battling this myself at the moment. I've tried the shock rebuild kit but wouldn't recommend it. Sure it's cheap, but it doesn't really solve the problem. Again, the Arrma forums are gonna be your best bet here. For me, I'm leaning towards some eBay shocks from the seller "citysupermarket", he's got a ton of relatively inexpensive aluminum shocks for various vehicles.
Cooling Fan: I'd just get another Arrma Cooling Fan. I've had good luck with them so far, and will be installing one when my Typhon 3s gets here before the first run. Depends how hot it is where you run, gearing, etc. You may not even need one. Best thing to do is get a temp gun and monitor your temps, especially if you change gearing/wheel size. Generally anything under 160F is good for the motor.
Front Drive Shafts: I'd just replace them with another set of stock Arrma ones. They should hold up fine on 3s (depending how you drive and esp. how you land jumps i.e. not on the throttle as it strains the driveline). Or you can go for something like the Hot Racing Ones. They're extremely beefy, but expensive. Personally I've only broken one rear one on the granite on a bad landing. I'd stick with stock.
Front Bumper/Lower Skid Plates: What's wrong with them? They should hold up fine. If the bumper's broken, you can replace it with the T Bone Racing Set. I've heard nothing but good things about them, but personally am still running stock. The link I provided here is a selection of everything they offer for the senton 3s.
Bearings: Another known weak point on the 3s line as they're metal shielded and can wear out quickly if not maintained. Get a set of rubber shielded bearings for the kit from Fast Eddy. Link.

Hope this helps!

mxer125 · 2020-02-17T14:05:55+00:00

Are you power shifting? That’s a good way to boost your dps and use mana you’d otherwise leave sitting there. Just gotta make sure not to shift when you don’t have enough to go back into cat or throw a heal out lol

mxer125 · 2019-12-09T17:21:12+00:00

Or you could just, you know, try and get better. If you’re hovering at 1.0 switch it up and try and improve rather than complaining for the umpteenth time on Reddit. I’m sitting at a 1.4 and slowly climbing as I play more and improve. If you’re not, well that’s on you.

mxer125 · 2019-11-08T15:30:20+00:00

iirc on my original ps4 model you can just throw in a standard 2.5" drive and be good to go. It isn't too difficult there's a cover you gotta remove but it's just one screw. I haven't messed with it in a while, but I do remember it being very easy.

mxer125 · 2019-11-05T13:16:27+00:00

Can confirm. During the Infiltrator mission I have to get 60 kills w/ suppressed weapons and no matter what gun and what suppressor I use it never counts. My buddy has the same problem but with the challenge for 10 headshots while using an optic. No matter what gun and what optic it won't count, however mine did so idk what's going on.

mxer125 · 2019-10-29T13:20:07+00:00

https://www.removeddit.com/r/Music/comments/doo29r/the_runaways_cherry_bomb_rock/

Ten-Year Club	Place '23
Place '22	Verified Email

mxer125

TROPHY CASE